Development of technologies for selecting energy-efficient power supply circuits of railway traction networks
DOI:
https://doi.org/10.15587/2706-5448.2022.263961Keywords:
energy saving technologies, traction networks, power flows, energy losses, knowledge bases, expert systemsAbstract
The object of the study is the process of operation of traction and external power supply systems as objects of inextricable interconnection while reducing energy costs in the cost of railway transportation in real time. One of the most problematic areas is the technology for choosing energy-efficient power supply schemes for railway traction networks in real time. The methods of forming and transforming graphs of complex schemes of traction and external power supply systems and building expert control systems for the implementation of energy-saving technologies of electrified railways were further developed in the work.
In the course of the study, to increase the efficiency of simulation modeling of electric traction networks, the statistical characteristics of the loads of feeders that supply the final boundary sections, stations, depot access tracks, railway junctions and idle voltages on the traction substation tires were obtained. Methods of calculation and modeling of traction power supply have been developed, which take into account the inseparable relationship with power systems and allow choosing rational modes with minimal power flows and energy losses. Proposed methods of managing the modes of operation of the traction power supply system based on a vague description of their states and an expert system that allow solving new problems. Including, the choice of energy-saving power supply schemes in the case of power flows, economic modes of network operation in case of intensification of the transportation process. Thanks to this, ways of reducing power consumption and minimizing energy losses of traction power supply systems are proposed, which allow minimizing power flows and power losses by adjusting load flow parameters and voltage levels of traction substations. And also to increase the energy efficiency of electrified railway lines.
The technique of technical and economic feasibility of power supply schemes of traction networks and evaluation of the possibility of switching to cantilever or loop power supply schemes with parallel connection points has been developed. The implemented recommendations save about 25 thousand kWh per 1 km of two-track section.
References
- Kornienko, V. V., Kotelnikov, A. V., Domanskii, V. T. (2022). Elektrifikatciia zheleznykh dorog. Mirovye tendentcii i perspektivy (Analiticheskii obzor). Kyiv: Transport Ukrainy, 196.
- Markvard, K. G. (1982). Elektrosnabzhenie elektrifitcirovannykh zheleznykh dorog. Moscow: Transport, 528.
- Kiessling, F., Puschmann, R., Schmieder, A., Schneider, E. (2017). Contact Lines for Electric Railways: Planning, De-sign, Implementation, Maintenance. Wiley Publishers, 994.
- Venikova, V. A. (Ed.). (1983). Elektroenergeticheskie sistemy v primerakh i illiustratciiakh. Moscow: Energoatomizdat, 456.
- Pelise, R. (1982). Energeticheskie sistemy. Moscow: Vysshaia shkola, 568.
- Shydlovskyi, A. K., Kuznetsov, V. H., Nykolaenko, V. H. (1987). Optymyzatsyia nesymmetrychnikh rezhymov system elektrosnabzhenyia. Kyiv: Naukova dumka, 174.
- Domanskii, V. T., Domanskii, I. V., Domanskii, V. V., Domanskaia, G. A. (2021). Povyshenie energeticheskoi effektivnosti elektricheskikh sistem s tiagovymi nagruzkami. Informacione tehnologije za e-obrazovanje. Banja Luka, 99–113.
- Domanskyi, I. V. (2016). Osnovy enerhoefektyvnosti elektrychnykh system z tiahovymy navantazhenniamy. Kharkiv: vyd-vo TOV «Tsentr informatsii transportu Ukrainy», 224.
- German, L. A., Serebriakov, A. S. (2013). Reguliruemye ustanovki emkostnoi kompensatcii v sistemakh tiagovogo elektrosnabzheniia zheleznykh dorog. Moscow: FGBOU «Uchebno-metodicheskii tcentr po obrazovaniiu na zheleznodorozhnom transporte», 315.
- Bondarenko, V. O., Domanskii, I. V., Kostin, G. N. (2017). Analiz energoeffektivnosti rezhimov raboty elektricheskikh sistem s tiagovymi nagruzkami. Elektrotekhnіka і elektromekhanіka, 1, 54–62.
- Mitrofanov, A. N. (2005). Modelirovanie protcessov prognozirovaniia i upravleniia elektropotrebleniem tiagi poezdov. Samara: SamGAPS, 174.
- Zakariukin, V. P., Kriukov, A. V. (2005). Slozhnonesimmetrichnye rezhimy elektricheskikh sistem. Irkutsk: izd-vo Irkutskogo un-ta, 273.
- Domanskii, I. V. (2015). Razvitie metodov rascheta sistem tiagovogo elektrosnabzheniia i pitaiushchikh ikh energosistem. Elektrotekhnіka і elektromekhanіka, 4, 62–68.
- Kornienko, V. V., Domanskaia, G. A. (2007). Metody rascheta i modelirovaniia rezhimov raboty sistem tiagovogo elektrosnabzheniia i pitaiushchikh ikh energosistem. Eastern-European Journal of Enterprise Technologies, 5 (3 (29)), 31–37.
- Domanskyi, I. V. (2016). Osnovy enerhoefektyvnosti elektrychnykh system z tiahovymy navantazhenniamy. Kharkiv: vyd-vo TOV «Tsentr informatsii transportu Ukrainy», 224.
- Lyubarskiy, B. G. (2015). Optimization of traction drive behaviour based on synchronous motors with permanent magnet excitation. Informatsiino-keruiuchi systemy na zaliznychnomu transporti, 2 (105), 21–24.
- Markvard, G. G. (1972). Primenenie teorii veroiatnosti i vychislitelnoi tekhniki v sisteme energosnabzheniia. Moscow: Transport, 225.
- Dmitrienko, V. D., Zakovorotnyi, A. Iu. (2013). Modelirovanie i optimizatciia protcessov upravleniia dvizheniem dizel-poezdov. Kharkiv: Izd. tcentr «NTMT», 248.
- Feller, V. (1984). Vvedenie v teoriiu veroiatnostei i ee prilozheniia. Moscow: Mir, 528.
- Miroshnichenko, R. I. (1982). Rezhimy raboty elektrifitcirovannykh uchastkov. Moscow: Transport, 207.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2022 Valerii Domanskyi, Illia Domanskyi, Svitlana Zakurdai, Dmytro Liubarskyi
This work is licensed under a Creative Commons Attribution 4.0 International License.
The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.