Development of the construction of the cut-off blade from circular saws

Authors

  • Анатолій Володимирович Васильєв Poltava National Technical Yuri Kondratyuk University, Pershotravneviy 24, Poltava, 36000, Ukraine https://orcid.org/0000-0002-1767-8569
  • Станіслав Вячеславович Попов Poltava National Technical Yuri Kondratyuk University, Pershotravneviy 24, Poltava, 36000, Ukraine https://orcid.org/0000-0003-2381-152X
  • Володимир Дмитрович Даценко Poltava National Technical Yuri Kondratyuk University, Pershotravneviy 24, Poltava, 36000, Ukraine

DOI:

https://doi.org/10.15587/2312-8372.2015.44396

Keywords:

cutting pieces, cut-off blade, disk cutter, circular saw

Abstract

The aim of this article is to develop the design of the cut-off blade from circular saw, as a way of reducing consumption of cutting tool during cutting operations. The work is carried out in order to increase the reliability and service life of the cut-off blade of disk type, material of cutting parts are made of high speed steel P6M5. It is proposed the design of fixing of proposed cutter in the lathe tool carriers. The influence of the degree of sharpening the cutting edge on the firmness of cutting-off blade is offered. It is proposed to determine the severity of the blades by scanning on background of millimeter divisions by scanner with high resolution, allowing controlled rounded cutting edge with radius of 0,2 mm by diamond bar. Edge rounding allowed receiving increase sustainability of the tool to 1,8 times in a determined range of thickness of cut.

Author Biographies

Анатолій Володимирович Васильєв, Poltava National Technical Yuri Kondratyuk University, Pershotravneviy 24, Poltava, 36000

Candidate of Technical Science, Associate Professor

Department of manufacturing engineering

Станіслав Вячеславович Попов, Poltava National Technical Yuri Kondratyuk University, Pershotravneviy 24, Poltava, 36000

Candidate of Technical Science, Associate Professor

Department of manufacturing engineering

Володимир Дмитрович Даценко, Poltava National Technical Yuri Kondratyuk University, Pershotravneviy 24, Poltava, 36000

Department of manufacturing engineering

References

  1. Krivoruchko, D., Emel'ianenko, S., Degtiarev, I. (2013). Improving the efficiency of the process of cutting pieces of cobalt alloy. Collection of scientific work of NTU "KhPI", 8, 101-108.
  2. Mironenko, E., Guzenko, V., Mirontsov, S. (2012). Improving precast cutting blades for heavy lathes. Collection of scientific work of NTU "KhPI", 82, 78-84.
  3. Vereshchaka, A. A., Vereshchaka, A. S. (2015). Improved tool by controlling the composition, structure and properties of the coating. Hardening and coating technology, 9, 9-19.
  4. Kirillov, A. (2005). Intensification of "dry" machining. Collection of scientific work of NTU "KhPI", 68, 255-266.
  5. Pukhal'skii, V. (2007). Principles of structural and parametric analysis of structures on the example of a cutting tool. Bulletin of Mechanical Engineering, 7, 46-48.
  6. Kappachev, A. (2006). Оwn dynamic characteristics of rotating circular saws during uneven heating. Bulletin of Mechanical Engineering, 5, 32-36.
  7. Popov, S., Vasilyev, V., Lednіk, R. (2015). Theoretical wear research of conical friction bearing. Technology Audit And Production Reserves, 2(1(22)), 60-64. doi:10.15587/2312-8372.2015.41395
  8. Butakov, B., Pastushenko, S., Artyukh, V., Marchenko, D. (2006). Hardening of parts in order to increase their strength and durability of the contact. Bulletin of Poltava State Agrarian Academy, 4, 28-30.
  9. Sedlacek, J., Slany, M. (2010, May 17). Analysis of Delamination in Drilling of Composite Materials. MM Science Journal, Vol. 2010, № 02, 194–197. doi:10.17973/mmsj.2010_06_201010
  10. Beck, F., Eberhard, P. (2014). Application of different models for modeling abrasive wear. World Congress on Computational Mechanics (WCCM XI), 20-25 July, 2014, Barcelona, Spain, 125-127.
  11. Harrington, E. (2005). The Desirability Function. Industrial Quality Control, 21, 494-498.

Downloads

Published

2015-05-28

How to Cite

Васильєв, А. В., Попов, С. В., & Даценко, В. Д. (2015). Development of the construction of the cut-off blade from circular saws. Technology Audit and Production Reserves, 3(1(23), 60–64. https://doi.org/10.15587/2312-8372.2015.44396

Issue

Vol. 3 No. 1(23) (2015): Energy, energy-saving technologies and equipment. Electrical engineering and industrial electronics

Section

Mechanical engineering and machine building

License

Copyright (c) 2016 Анатолій Володимирович Васильєв, Станіслав Вячеславович Попов, Володимир Дмитрович Даценко

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.