Introduction of the circular tube in the carrying system of gondola cars to ensure the rational strength index

Authors

DOI:

https://doi.org/10.15587/2312-8372.2015.47863

Keywords:

gondola car, improvement of carrying structure, implementation of round pipes, rational indicators of strength

Abstract

Features and results of the study on the introduction of round pipes in the carrying systems of gondola cars based on the proposed method by the author are presented in the article. The use of such method allows minimal consumption of materials of introduced elements under the conditions of strength and operational reliability by ensuring rational indicators of strength.

Results of complex theoretical and computational testing, computer modeling, durability and operational reliability of improved design of gondola cars pointed to its performance and efficiency of the implemented technical solutions. So as a result of its test of strength in all cases calculated according to calculation mode it is found that the resulting equivalent load does not exceed the allowable normalized their values of fatigue strength (at the base of test in 107 cycles) is provided, project service life is more than 32 years. In addition, the results of additional analysis to ensure strength in welded joints have also confirmed their performance.

Author Biography

Олексій Вікторович Фомін, State Economy and Technology University of Transport, st. M. Lukashevich, 19, Kyiv, Ukraine, 03049

Candidate of Technical Sciences, Associate Professor

Department of wagons and wagon economy 

References

  1. Fomin, O. V. (2013). Optymizatsiine proektuvannia elementiv kuzoviv zaliznychnykh napivvahoniv ta orhanizatsiia yikh vyrobnytstva. Donetsk: DonIZT UkrDAZT, 251.
  2. Fomin, O. V. (2014). Doslidzhennia defektiv ta poshkodzhen nesuchykh system zaliznychnykh na pivvahoniv. Kyiv: DETUT, 299.
  3. Fomin, O., Burlutsky, O., Fomina, Yu. (2015). Development and application of cataloging in structural design of freight car building. Scientific and technical journal «Metallurgical and Mining Industry», № 2, 250–256.
  4. Fomin, O. V. (2014). Analiz dotsilnosti zastosuvannia shestyhrannykh porozhnystykh profiliv v yakosti skladovykh elementiv nesuchykh system napivvahoniv. Visnyk Dnipropetrovskoho natsionalnoho universytetu zaliznychnoho transportu im. akademika V. Lazariana, Nauka ta prohres transportu, 6 (54), 146–153.
  5. Fomin, O. V. (2013). Teoretychni osnovy prohramnoho kompleksu vyznachennia ta vykorystannia matematychnykh modelei skladovykh vantazhnykh vahoniv. Visnyk Kremenchutskoho natsionalnoho universytetu im. M. Ostrohradskoho, 6 (83), 87–91.
  6. Fomin, O. (2014). Modern requirements to carrying systems of railway general-purpose gondola cars. Scientific and technical journal «Metallurgical and Mining Industry», 5, 31–40.
  7. Aliamovskii, A. A. (2007). SolidWorks/COSMOSWorks 2006–2007. Inzhenernyi analiz metodom konechnyh elementov. M.: DMK, 784.
  8. Normy dlia rascheta i proektirovaniia vagonov zheleznyh dorog MPS kolei 1520 mm (nesamohodnyh). (1996). M.: GosNIIV; VNIIZhT, 319.
  9. GOST R54157-2010. Truby stal'nye profil'nye dlia metallokonstruktsii. Tehnicheskie usloviia. (2010). Effective as of 21.12.2010. M.: IPK Izdatel'stvo standartov, 92.
  10. Ustich, P. A., Karpych, V. A., Ovechnikov, M. N. (1999). Nadezhnost' rel'sovogo netiagovogo podvizhnogo sostava. M.: IG “Variant”, 415.

Published

2015-07-23

How to Cite

Фомін, О. В. (2015). Introduction of the circular tube in the carrying system of gondola cars to ensure the rational strength index. Technology Audit and Production Reserves, 4(1(24), 83–89. https://doi.org/10.15587/2312-8372.2015.47863