Development of decorative enamels for goldware, silverware and copperware

Authors

DOI:

https://doi.org/10.15587/2312-8372.2016.63685

Keywords:

enamel, gold, silver, copper, fondant, decoration, glass base, gloss

Abstract

The paper analyzed the characteristics of decorative enamels for goldware, silverware and copperware. The main types of jewelry enamels and techniques for obtaining products using special application techniques were considered, as well as the requirements to them were formulated. Analysis of the current state of production of decorative enamels and their products is given.

The results of the development of low-melting lead-free opacified enamel with high gloss are given.

It is investigated an effect of additives TiO2, MoO3, Fe2O3 on the properties of lead-free glass and enamel coatings based on it.

It is detected component (MoO3) and its rational amount (3,0 wt. %) to obtain a white enamel coating, which can be used as a basis for the light-colored enamels. Lead-free glass coatings were obtained on copper with diffuse reflection factor (DRF) to 67 %, the specular reflection factor (SRF) to 72 %.

Developed green, mustard, purple, blue, brown and enamel glass coatings with high gloss have good adhesion to copper samples and may be recommended for testing under production conditions.

The paper shows the possibility of enamel coatings of different colors and shades for art and jewelry application on the glass base of the same chemical composition of different chromophores.

Author Biographies

Ольга Петрівна Рижова, Ukrainian State University of Chemical Technology, Gagarina 8, Dnipropetrovsk, Ukraine, 49005

PhD student

Department of chemical technology of ceramics and glass

Ольга Борисівна Гуржій, Ukrainian State University of Chemical Technology, Gagarina 8, Dnipropetrovsk, Ukraine, 49005

PhD student

Department of chemical technology of ceramics and glass

References

  1. Brepol', E.; Translated from German: Kuznetsova, I. V. (1986). Hudozhestvennoe emalirovanie. Leningrad: Mashinostroenie, 127.
  2. Flerov, A. V., Demina, M. T., Elizarov, A. N., Shemanov, Yu. A. (1986). Tehnika hudozhestvennoi emali, chekanki i kovki. Moscow: Vysshaia shkola, 88.
  3. Borisov, L. F. (2000). Kovka. Chekanka. Inkrustatsiia. Emal'. Osnovy kuznechnogo dela. Tehnologiia obrabotki razlichnyh metallov. Hudozhestvennaia otdelka izdelii. Moscow: OOO «Adelant», 224.
  4. Yatsenko, E. A., Kondiurin, A. M., Rat'kova, V. P., Tkachenko, N. M. (1997). Hudozhestvennye emali dlia medi. Steklo i keramika, 3, 25–27.
  5. Vargin, V., Antonova, E., Gutorova, L. (1958). Tehnologiia emali i emalirovaniia metallov. Moscow: Gosudarstvennoe izdatel'stvo literatury po stroitel'stvu, arhitekture i stroitel'nym materіalam, 395.
  6. Zubekhin, A. P., Yatsenko, E. A., Klimenko, E. B. (2001). Bessvintsovye boroaliumosilikatnye emali dlia hudozhestvennyh izdelii iz medi. Steklo i keramika, 4, 24–25.
  7. Pagliuca, S., Faust, W. D. (2011). Porcelain (Vitreous) Enamels and Industrial Enamelling Processes. The Preparation, Application and Properties of Enamels. Ed. 3. Mantova, Italy: Tipografia Commercialesrl Via Vittorino da Feltre, 900.
  8. In: Bragina, L. L., Zubehin, A. P. (2003). Tehnologiia emali i zashchitnyh pokrytii. Kharkov: NTU «KhPI»; Novocherkassk: YuRGTU (NPI), 484.
  9. Sarrazy, K., Aronica, A., Leseur, A. (2015). Low fire enamels for new pre-primed steels. 23rd International Enamellers Congress. Florence, 88–100.
  10. Pavlushkin, N. M., Sentiurin, G. G., Hodakovskaia, R. Ya. (1970). Praktikum po tehnologii stekla i sitallov. Moscow: Izdatel'stvo literatury po stroitel'stvu, 248.
  11. Tsareva, E. V., Spiridonov, Yu. A. (2011). Dekorativnye emali po blagorodnym metallam. Steklo i keramika, 9, 40–41.

Downloads

Published

2016-03-29

How to Cite

Рижова, О. П., & Гуржій, О. Б. (2016). Development of decorative enamels for goldware, silverware and copperware. Technology Audit and Production Reserves, 2(4(28), 55–59. https://doi.org/10.15587/2312-8372.2016.63685

Issue

Vol. 2 No. 4(28) (2016): Technologies of food, light and chemical industry

Section

Technologies of food, light and chemical industry

License

Copyright (c) 2016 Ольга Петрівна Рижова, Ольга Борисівна Гуржій

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.