Development of efficiency improvement method of photovoltaic converters by nanostructurization of silicon wafers
DOI:
https://doi.org/10.15587/2312-8372.2016.85137Keywords:
photovoltaic converters, porous silicon, reflection coefficient, electrochemical etching, nanostructuresAbstract
The object of this research is the process of preparing silicon wafers for further use as the main component of solar panels.
One of the problems in this process is the degradation of silicon in service and high rates of reflection coefficient, which greatly affects the PVC performance.
The layers of porous silicon were formed by electrochemical etching in a solution of hydrofluoric acid at room temperature. This method is the most common for making porous semiconductors, due to the simplicity and low cost
The technological modes of obtaining porous silicon layer were determined. The porous silicon was formed by electrochemical etching in a solution of hydrofluoric acid. Nitrogen passivation was used for stabilization of the properties. It was found that the thickness of the porous layer correlates with the etching time. The porosity shows a nearly linear dependence on the current density. The obtained results allow to state that porous silicon is a promising material for creation of solar cells on its base.
References
- Ostafiychuk, B. K., Muronyuk, I. F., Kotsyubynsky, V. O., Glukhanyuk, V. D., Chelyadyn, V. L., Nagirna, N. N. (2008). Dye-Sensitized Solar Cells (Review). Physics and Chemistry of Solid State, 9 (1), 11–18.
- Alekseenko, S. V. (2006). Alternative Energy and Energy and Resource Saving Innovations. Technology. Solutions, 3, 38–41.
- Aroutiounian, V. M., Martirosyan, Kh. S., Hovhannisyan, A. S., Soukiassian, P. G. (2008). Use of Porous Silicon for Double- and Trilpe-Layer Antireflection Coatings in Silicon Photovoltaic Converters. Proceedings of National Academy of Sciences of Armenia. Physics, 43 (2), 111–119.
- Listratenko, A. M. (2001). Research and development of low-cost production technology of high-performance silicon solar cells for space application. Radioengineering, 121, 121–125.
- Zhao, J., Wang, A., Green, M. A. (1999, November). 24·5% Efficiency silicon PERT cells on MCZ substrates and 24·7% efficiency PERL cells on FZ substrates. Progress in Photovoltaics: Research and Applications, 7 (6), 471–474. doi:10.1002/(sici)1099-159x(199911/12)7:6<471::aid-pip298>3.0.co;2-7
- Suchikova, Y. A., Kidalov, V. V., Sukach, G. A. (2011, January). Influence of dislocations on the process of pore formation in n-InP (111) single crystals. Semiconductors, 45 (1), 121–124. doi:10.1134/s1063782611010192
- Suchikova, Y. A., Kidalov, V. V., Sukach, G. A. (2010). Influence of the Carrier Concentration of Indium Phosphide on the Porous Layer Formation. Journal of Nano- and Electronic Physics, 2 (4), 142–147.
- Suchikova, Y. A., Kidalov, V. V., Sukach, G. A. (2010). Preparation of nanoporous n-InP(100) layers by electrochemical etching in HCI solution. Functional Materials, 17 (1), 131–134.
- Dzhafarov, T.; In: Morales-Acevedo, A. (2013). Silicon Solar Cells with Nanoporous Silicon Layer. Solar Cells – Research and Application Perspectives. InTech, 386. doi:10.5772/51593
- Shin, B.-K., Lee, T.-I., Xiong, J., Hwang, C., Noh, G., Cho, J.-H., Myoung, J.-M. (2011, September). Bottom-up grown ZnO nanorods for an antireflective moth-eye structure on CuInGaSe2 solar cells. Solar Energy Materials and Solar Cells, 95 (9), 2650–2654. doi:10.1016/j.solmat.2011.05.033
- Boden, S. A., Bagnall, D. M. (2010, May). Optimization of moth-eye antireflection schemes for silicon solar cells. Progress in Photovoltaics: Research and Applications, 18 (3), 195–203. doi:10.1002/pip.951
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2016 Yana Sychikova
This work is licensed under a Creative Commons Attribution 4.0 International License.
The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.