Laboratory research of the stress-strain state of the drill string in the local bend of the well
DOI:
https://doi.org/10.15587/2312-8372.2019.156746Keywords:
stress-strain state, drill string, local bend, laboratory researchAbstract
The object of research is the operation of the drill string in the local bend of the well. One of the most problematic aspects in this case is the establishment of its stress-strain state. This is very important information, which, in particular, is used to make decisions on the duration and possibility of operating the drill string in a given geological and technical conditions.
Based on a critical literature review, physical modeling of the object of study was chosen to solve this problem. In particular, a special laboratory stand was designed, manufactured and tested, which provides:
- load model of the drill string axial tensile force and torque;
- modeling of curvilinear axes of wells with possible local excesses, based on the results of industrial inclinometry and profilometry;
- measurement of stresses and deformations of the model of the column and their interpretation to the values of the natural object.
As a model of a drill string, a copper tube with a weighting agent was used to provide criterial similarity with a full-scale object. To measure normal stresses on a drill string model, strain gauging was used. At the same time, analog voltage values on strain gauges are digitized and transferred to a personal computer for further processing and interpretation.
With the help of the proposed laboratory stand, experimental studies of the stress-strain state of a 127-mm drill string model in a local bend of well No. 10 of the Odesa deposit (Ukraine) were carried out. It has been established that the normal bending stresses that arise in this case can more than three times exceed the same values obtained without taking into account the presence of the specified curvature of the borehole axis.
Thanks to the proposed experimental method, it is possible to study the deformations and stresses that occur in the drill strings during their work in wells with local axial kinks. There is no need to apply complex analytical transformations and algorithms. In addition, the model has the same physical nature as the object of study. This is an extremely weighty argument, especially in the study of complex cases of interaction between the drill string and the borehole walls.
References
- Griguletskiy, V. G., Lukyanov, V. T. (1990). Proektirovanie komponovok nizhney chasti buril'noy kolonny. Moscow, 302.
- Moisyshyn, V. M., Borysevych, B. D., Havryliv, Yu. L., Zinchenko, S. A. (2013). Stiikist i kolyvannia burylnoi kolony. Ivano-Frankivsk, 590.
- Mitchell, R. F. (2007). The Effect of Friction on Initial Buckling of Tubing and Flowlines. SPE Drilling & Completion, 22 (2), 112–118. doi: http://doi.org/10.2118/99099-pa
- Mitchell, R. F. (2008). Tubing Buckling–The State of the Art. SPE Drilling & Completion, 23 (4), 361–370. doi: http://doi.org/10.2118/104267-pa
- Sikal, A., Boulet, J. G., Menand, S., Sellami, H. (2008). Drillpipe Stress Distribution and Cumulative Fatigue Analysis in Complex Well Drilling: New Approach in Fatigue Optimization. SPE Annual Technical Conference and Exhibition. Denver. doi: http://doi.org/10.2118/116029-ms
- Thompson, J. M. T., Silveira, M., van der Heijden, G. H. M., Wiercigroch, M. (2012). Helical post-buckling of a rod in a cylinder: with applications to drill-strings. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 468 (2142), 1591–1614. doi: http://doi.org/10.1098/rspa.2011.0558
- Miller, J. T., Su, T., Pabon, J., Wicks, N., Bertoldi, K., Reis, P. M. (2015). Buckling of a thin elastic rod inside a horizontal cylindrical constraint. Extreme Mechanics Letters, 3, 36–44. doi: http://doi.org/10.1016/j.eml.2015.03.002
- Miller, J. T., Su, T., Dussan V., E. B., Pabon, J., Wicks, N., Bertoldi, K., Reis, P. M. (2015). Buckling-induced lock-up of a slender rod injected into a horizontal cylinder. International Journal of Solids and Structures, 72, 153–164. doi: http://doi.org/10.1016/j.ijsolstr.2015.07.025
- Chudyk, I. I., Riznychuk, A. I., Milostian, M. O., Zholob, N. R. (2012). Eksperymentalni doslidzhennia enerhoperedavalnykh funktsii burylnoi kolony u stovburi skerovanoi sverdlovyny. Naukovyi visnyk IFNTUNH, 3 (33), 73–80.
- Stelzer, C. (2007). Drillpipe Failure and its Prediction. Leiben, 115.
- Rachkevych, R. V. (2014). Laboratorne modeliuvannia deformatsii trubnoi kolony v kryvoliniinomu stovburi sverdlovyny. Naukovyi visnyk IFNTUNH, 2 (37), 68–75.
- Sverdan, P. L. (2008). Vyshcha matematyka. Matematychnyi analiz i teoriia ymovirnostei. Kyiv, 450.
- Rachkevych, R. V. (2018). Rozvytok naukovykh osnov zabezpechennia pratsezdatnosti kolon burylnykh i nasosno-kompresornykh trub na diliankakh sverdlovyn iz heometrychnymy nedoskonalostiamy. Ivano-Frankivsk, 34.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2019 Ruslan Rachkevych, Ivasiv Vasyl, Vasyl Bui, Lidiіa Yurych, Iryna Rachkevych
This work is licensed under a Creative Commons Attribution 4.0 International License.
The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.
