Experimental determination of the spectrum of structure vibrations under the influence of technological load
DOI:
https://doi.org/10.15587/2312-8372.2019.179138Keywords:
survey of the structure, vibration diagnostics, natural frequencies of vibrations, mode of vibrations, dynamic load, finite element modelAbstract
The object of research is the process of propagation of vibrations from technological equipment to the metal structures of a building. One of the problems in the inspection and monitoring of construction objects is the assessment of the vibrational impact of technological equipment on the load-bearing elements of the building. Existing regulatory documents and methods for accounting for dynamic impact fully cover this problem, as evidenced by the presence of emergency cases of operating structures that are subject to dynamic loads.
The proposed approach, which is based on the hypothesis of considering the structure and technological equipment, has a dynamic impact as a single system with its corresponding dynamic characteristics. The implementation of this approach can be carried out by determining the integral dynamic parameters of the system with subsequent analysis and the establishment of causal relationships. During the study, records of continuous fixation of the parameters of the dynamic effect on the elements of the building structure, which are determined on the basis of preliminary analysis, were used. As a result of the analysis of the vibrograms, the vibrational spectra of the structure are constructed, from which the dominant vibrational frequencies of 3.470 and 3.625 Hz are determined. The established frequencies correspond to the main frequencies and their harmonics of the technological process implementation according to the technical characteristics of the equipment, amount to 3.670 Hz. The discovered phenomena of the internal resonance of the general construction system of the technological workshop make it possible to clearly formulate the causes of the appearance of excessive vibrations. Experimental studies of the influence of technological equipment on the frame of the structure are carried out. A finite element model of the frame based on an instrumental examination of the building is developed.
The obtained research results can be used to develop methods and technologies for diagnosing and establishing the causes of excessive fluctuations in the supporting and enclosing structures of structures under the action of a dynamic load of technogenic origin.
References
- Shcherbina, S. V., Britskyi, O. I., Ilienko, V. A., Bielov, I. D., Ostapenko, V. V., Lisovyi, Yu. V. et. al. (2016). Doslidzhennia provalnykh yavyshch v istorychnii chastyni Kyieva na terytorii natsionalnoho zapovidnyka «Sofiia Kyivska». Heoinformatyka, 2, 68–78.
- Connolly, D. P., Kouroussis, G., Giannopoulos, A., Verlinden, O., Woodward, P. K., Forde, M. C. (2014). Assessment of railway vibrations using an efficient scoping model. Soil Dynamics and Earthquake Engineering, 58, 37–47. doi: http://doi.org/10.1016/j.soildyn.2013.12.003
- Cacciola, P., Banjanac, N., Tombari, A. (2017). Vibration Control of an existing building through the Vibrating Barrier. Procedia Engineering, 199, 1598–1603. doi: http://doi.org/10.1016/j.proeng.2017.09.065
- Kavyanpoor, M., Shokrollahi, S. (2019). Dynamic behaviors of a fractional order nonlinear oscillator. Journal of King Saud University - Science, 31 (1), 14–20. doi: http://doi.org/10.1016/j.jksus.2017.03.006
- Giagopoulos, D., Arailopoulos, A., Dertimanis, V., Papadimitriou, C., Chatzi, E., Grompanopoulos, K. (2017). Computational Framework for Online Estimation of Fatigue Damage using Vibration Measurements from a Limited Number of Sensors. Procedia Engineering, 199, 1906–1911. doi: http://doi.org/10.1016/j.proeng.2017.09.424
- Bendjama, H., Bouhouche, S., Boucherit, M. S. (2012). Application of Wavelet Transform for Fault Diagnosis in Rotating Machinery. International Journal of Machine Learning and Computing, 2 (1), 82–87. doi: http://doi.org/10.7763/ijmlc.2012.v2.93
- Yamamoto, G. K., da Costa, C., da Silva Sousa, J. S. (2016). A smart experimental setup for vibration measurement and imbalance fault detection in rotating machinery. Case Studies in Mechanical Systems and Signal Processing, 4, 8–18. doi: http://doi.org/10.1016/j.csmssp.2016.07.001
- Jia, Y., Seshia, A. A. (2014). An auto-parametrically excited vibration energy harvester. Sensors and Actuators A: Physical, 220, 69–75. doi: http://doi.org/10.1016/j.sna.2014.09.012
- Lezhin, D. S., Falaleev, S. V., Safin, A. I., Ulanov, A. M., Vergnano, D. (2017). Comparison of Different Methods of Non-contact Vibration Measurement. Procedia Engineering, 176, 175–183. doi: http://doi.org/10.1016/j.proeng.2017.02.286
- Gianti, M. S., Prasetyo, E., Wijaya, A. D., Berliandika, S., Marzuki, A. (2017). Vibration Measurement of Mathematical Pendulum based on Macrobending-Fiber Optic Sensor as a Model of Bridge Structural Health Monitoring. Procedia Engineering, 170, 430–434. doi: http://doi.org/10.1016/j.proeng.2017.03.069
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2019 Maksim Vabischevich, Oleg Dedov, Oleksandr Glitin
![Creative Commons License](http://i.creativecommons.org/l/by/4.0/88x31.png)
This work is licensed under a Creative Commons Attribution 4.0 International License.
The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.