Development of the physical and mathematical model of the baking process of the dough pieces in bakery ovens

Authors

DOI:

https://doi.org/10.15587/2312-8372.2019.179170

Keywords:

industrial oven K-BOM, radiation-convective heat and mass transfer, mathematical model of bread baking process

Abstract

The object of research is the physical and mathematical models designed to describe the heat and mass transfer inside the porous material during baking. In order to improve the quality and at the same time reduce energy consumption in production, as well as improve the technical and economic indicators of the operation of furnaces, the duration and safety of their operation, the designs of furnace units are being improved, new ones are being developed and their thermal conditions are being optimized. One of the biggest problems is the task of replacing obsolete oven designs with new ones, with automatic regulation of the thermal regime of baking, which will ensure high quality bread while reducing fuel, steam, electricity and human resources. Since the quality of products, in particular, taste, aroma, porosity, gloss, appearance and other indicators of bakery products, largely depends on the design of the furnace unit, the thermal and hygrothermal conditions of the working chamber, as well as its proper operation. These factors affect the loss during baking, which can vary from 6 to 12 %, which affects the yield of bread. This paper presents a physical and mathematical model of the process of baking dough pieces in baking ovens using the example of the industrial oven K-BOM-25 (Ukraine) developed by the author.

A mathematical model of the process of baking bread in the gas channels of the baking chamber is given taking into account radiation-convective heat transfer, mass transfer taking into account the introduction of water vapor to moisten the dough pieces and turbulence of the multiphase flow. The dependence of the multiphase flow turbulence is formulated on the basis of the Euler equations averaged over Reynolds. This model allows with sufficient accuracy and detail to take into account the technological conditions and design features of modern conveyor baking ovens. And it also allows for extensive parametric studies of conjugate heat transfer in them with access to the final indicator – the quality of finished products.

Author Biography

Alexander Kovalyov, National University of Food Technologies, 68, Volodymyrska str., Kyiv, Ukraine, 01601

PhD, Associate Professor

Department of Machines and Apparatus of Food and Pharmaceutical Manufacture

References

  1. Vanin, F. M., Lucas, T., Trystram, G. (2009). Crust formation and its role during bread baking. Trends in Food Science & Technology, 20 (8), 333–343. doi: http://doi.org/10.1016/j.tifs.2009.04.001
  2. Purlis, E., Salvadori, V. O. (2009). Modelling the browning of bread during baking. Food Research International, 42 (7), 865–870. doi: http://doi.org/10.1016/j.foodres.2009.03.007
  3. Purlis, E. (2010). Browning development in bakery products – A review. Journal of Food Engineering, 99 (3), 239–249. doi: http://doi.org/10.1016/j.jfoodeng.2010.03.008
  4. Lostie, M., Peczalski, R., Andrieu, J., Laurent, M. (2002). Study of sponge cake batter baking process. II. Modeling and parameter estimation. Journal of Food Engineering, 55 (4), 349–357. doi: http://doi.org/10.1016/s0260-8774(02)00132-2
  5. Bikard, J., Coupez, T., Della Valle, G., Vergnes, B. (2008). Simulation of bread making process using a direct 3D numerical method at microscale: Analysis of foaming phase during proofing. Journal of Food Engineering, 85 (2), 259–267. doi: http://doi.org/10.1016/j.jfoodeng.2007.07.027
  6. Broyart, B., Trystram, G. (2003). Modelling of Heat and Mass Transfer Phenomena and Quality Changes During Continuous Biscuit Baking Using Both Deductive and Inductive (Neural Network) Modelling Principles. Food and Bioproducts Processing, 81 (4), 316–326. doi: http://doi.org/10.1205/096030803322756402
  7. Bikard, J., Coupez, T., Della Valle, G., Vergnes, B. (2010). Simulation of bread making process using a direct 3D numerical method at microscale: analysis of baking step. International Journal of Material Forming, 5 (1), 11–24. doi: http://doi.org/10.1007/s12289-010-1018-3
  8. Baldino, N., Gabriele, D., Lupi, F. R., de Cindio, B., Cicerelli, L. (2014). Modeling of baking behavior of semi-sweet short dough biscuits. Innovative Food Science & Emerging Technologies, 25, 40–52. doi: http://doi.org/10.1016/j.ifset.2013.12.022
  9. Desyk, M. G., Telychkun, Yu. S., Lytovchenko, I. M., Telychkun, V. I. (2016). Mathematical modelling of heating the dough pieces of cylindrical shape. Scientific Works o f NUFT, 22 (4), 134–140.
  10. Cornejo, P., Farías, O. (2011). Mathematical Modeling of Coal Gasification in a Fluidized Bed Reactor Using a Eulerian Granular Description. International Journal of Chemical Reactor Engineering, 9 (1), 1515–1542. doi: http://doi.org/10.1515/1542-6580.2288

Downloads

Published

2019-06-30

How to Cite

Kovalyov, A. (2019). Development of the physical and mathematical model of the baking process of the dough pieces in bakery ovens. Technology Audit and Production Reserves, 3(3(47), 36–40. https://doi.org/10.15587/2312-8372.2019.179170

Issue

Vol. 3 No. 3(47) (2019): Chemical engineering

Section

Reports on research projects

License

Copyright (c) 2019 Alexander Kovalyov

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.