Dependence of anodic titanium (IV) oxide properties on activator composition

Authors

  • Андрей Владимирович Дементий National Technical University «Kharkiv Polytechnic Institute» 21, Frunze street, Kharkov, Ukraine, Ukraine

DOI:

https://doi.org/10.15587/2312-8372.2013.18230

Keywords:

titanium anodizing, activator, ionic radius, titanium (IV) oxide layer, thickness, porosity

Abstract

The process of obtaining a secondary carrier of catalytically active substance for its application in catalysis was considered and some results of our research in this field were given. The main objective of the study is to examine the dependence of properties of titanium (IV) oxide, obtained by anodization method, on the activator composition. Porous titanium (IV) oxide layer was obtained by titanium plate anodizing in electrolyte consisting of aqueous solutions of sulfuric acid and activator. By changing the activator composition its effect on the properties of secondary carrier and optimal anodizing time was studied. The presented method allows estimating the dependence of thickness and porosity of the obtained secondary carrier and optimal anodization time on the activator composition. The results of the study can be used in electrochemistry and catalysis for improving the process of obtaining secondary carrier forcatalytically active substances. We propose to improve the process of getting secondary carrier for catalytically active substances on the surface of titanium plate using more efficient activator.

Author Biography

Андрей Владимирович Дементий, National Technical University «Kharkiv Polytechnic Institute» 21, Frunze street, Kharkov, Ukraine

Младший научный сотрудник

Кафедра автоматизации химико-технологических систем и экологического мониторинга

References

  1. Стайлз, Э. Б. Носители и нанесенные катализаторы. Теория и практика [Текст] : пер. с англ. – М. : Химия, 1991. – 240 с.
  2. Дерюжкина, В. И. Технология катализаторов [Текст] / В. И. Дерюжкина, Е. И. Добкина, В. Е. Сороко; под общ. ред. И. П. Мухленова. – 2-е изд. – Л. : Химия, 1979. – 328 с.
  3. Исмагилов, З. Р. Приготовление и исследование блочных катализаторов со вторичным термостабильным покрытием для очистки отходящих газов от окислов азота углеводородами [Текст] / З. Р. Исмагилов, Л. Т. Цикоза, Р. А. Шкрабина, Н. В. Шикина // Кинетика и катализ. – 1998. – Т. 39, № 5. – С. 661-664.
  4. Liu, Ya. [Text] / Ya. Liu, T. Hayakawa // Applied Catalysis A: General. – 2002. – Vol. 223. – P. 137.
  5. Avgouropoulos, G. Cu0-Ce02 mixed oxide catalysts for the selective oxidation of carbon monoxide in excess hydrogen [Text] / G. Avgouropoulos, Th. Ioannides, H. Matralis, J. Batista, S. Hocevar // Catal. Lett. – 2001. – V.73. – №1. – P. 33-40.
  6. Han-Jun, Oh. Synthesis of effective titania nanotubes for wastewater purification [Text] / Han-Jun Oh, Jong-Ho Lee, Young-Jig Kim, Su-Jeong Suh, Jun-Hee Lee, Choong-Soo Ch. // Applied Catalysis B: Environmental. – 2008. – V. 84. – Is. 1-2. – P. 142-147.
  7. Беленький, М. А. Электроосаждение металлических покрытий [Текст] / М. А. Беленький, А. Ф. Иванов. – М. : Металлургия, 1985. – 225 с.
  8. Аверьянов, Е. Е. Справочник по анодированию [Текст] / Е. Е. Аверьянов. – М.: Металлургия, 1985. – 224 с.
  9. Справочник по электрохимии [Текст] / под ред. А. М. Сухотина. - Л. : Химия, 1981. – 488 с.
  10. Справочник химика [Текст] / под ред. Б. П. Никольского. – М-Л.: Химия, 1982. – Т. 1. – 455 с.
  11. Stiles, A. B. (1991). Nositeli i nanesennie katalizatory. Teoriya i praktika М.: Himiya, 240.
  12. Dobkina, E. I., Deryuzhkina, V. I., Soroko, B. E.; In: Muhlyonov, I. P. (1979). Tehnologiya katalizatorov. L.: Himiya, 328.
  13. Cikoza, L. Т.,Ismagilov, Z. R., Shkrabina, R. А. (1998). Kinetika i kataliz, т. 39, Vol. 5, 661-664.
  14. Liu, Ya., Hayakawa, T. (2002). Applied Catalysis A: General, 223, 137.
  15. Avgouropoulos, G., Ioannides, Th. (2001). Catalysis Letters, 73, 1, 33.
  16. Han-Jun Oh, Jong-Ho Lee, Young-Jig Kim, Su-Jeong Suh, Jun-Hee Lee, Choong-Soo Ch. (2008). Synthesis of effective titania nanotubes for wastewater purification. Applied Catalysis B: Environmental, V. 84, Is. 1-2, 142-147.
  17. Belenkiy, M. A., Ivanov, A. F. (1985). Elektroosazhdeniye metallicheskih pokritiy. М.: Metallurgiya, 225.
  18. Averyanov, Е. Е. (1985). Spravochnik po anodirovaniyu. М.: Metallurgiya, 224.
  19. In: Suhotin, A. M. (1981). Spravochnik po elektrohimii. L.: Himiya, 488.
  20. In: Nikolskiy, B. P. (1982). Spravochnik himika. М-L.: Himiya, Т.1, 455.

Downloads

Published

2013-10-29

How to Cite

Дементий, А. В. (2013). Dependence of anodic titanium (IV) oxide properties on activator composition. Technology Audit and Production Reserves, 5(4(13), 24–25. https://doi.org/10.15587/2312-8372.2013.18230

Issue

Vol. 5 No. 4(13) (2013): MATERIALS OF SCIENTIFIC CONFERENCE. Mathematical modeling - applied aspects

Section

Technology organic and inorganic substances

License

Copyright (c) 2016 Андрей Владимирович Дементий

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.