Analysis of the influence of binding adhesives on the structural strength of integral and semi-rigid covers

Authors

DOI:

https://doi.org/10.15587/2706-5448.2020.208937

Keywords:

binding adhesive, punching forces, structural strength, integral cover, semi-rigid cover.

Abstract

The object of the research is the processes of adhesion structural parts of integral and semi-rigid covers with bookbinding adhesives using continuous and discrete methods of applying adhesive. The conducted experimental studies are based on the use of a comparative technique for measuring the rigidity of double glued and double without adhesion binding materials by determining objective indicators of destructive pressure. The main assumption of research is that the use of various types of bookbinding adhesives applied in continuous and discrete layers will contribute to the formation of additional structural strength of the produced covers. This can’t be achieved without analysis and selection of adhesive polymer compositions from those widely used in bookbinding processes, taking into account the structural strength of the covers acquired after adhesion with these compositions. It is proposed to use fragments of integral and semi-rigid covers, made of high-quality coated papers of various weights, in an amount sufficient to obtain the confidence indicators of the study. As a result of experimental studies of glued coated paper samples, an increase in the relative indicators of structural strength is revealed, caused by the physicochemical effect of various types of adhesives. The features of the application of adhesive polymer compositions on the glued fragments of covers by continuous, tape and checkerboard methods are revealed. Analysis of double glued with a continuous layer of cover fragments, in comparison with double non-glued fragments, showed a significant increase in the relative structural strength of the glued fragments in a wide size range. It is determined that the discrete commensurate deviation of the obtained indicators is caused by the properties used for the research of adhesives. Comparative analysis of glued fragments of covers by tape and checkerboard methods of adhesion application revealed a significant difference in the experimental strength indicators obtained, towards a significant advantage of the checkerboard method. This, in addition to ensuring the structural strength of the glued fragments of the covers, close to the continuous method of applying the adhesion, contributes to a significant reduction in its expenditure component. The results of studies to determine the influence of a sample of binding adhesives, common in the technological processes of manufacturing book products, on the structural strength of integral and semi-rigid covers, to contribute to the planning of resource-saving technological processes.

Author Biographies

Oleksandr Paliukh, National Technical University of Ukraine «Igor Sikorsky Kyiv Polytechnic Institute», 37, Peremohy ave., Kyiv, Ukraine, 03056

PhD, Associate Professor

Department of Printing Technology

Petro Kyrychok, National Technical University of Ukraine «Igor Sikorsky Kyiv Polytechnic Institute», 37, Peremohy ave., Kyiv, Ukraine, 03056

Doctor of Technical Sciences, Professor, Director

Publishing and Printing Institute

Yevhenii Dziadyk, National Technical University of Ukraine «Igor Sikorsky Kyiv Polytechnic Institute», 37, Peremohy ave., Kyiv, Ukraine, 03056

Postgraduate Student

Department of Printing Technology

References

  1. Arnett, J. A. (2019). The Art of Bookbinding. Bibliopegia; or, The Art of Bookbinding in All Its Branches, 1–8. doi: http://doi.org/10.4324/9780429030420-1
  2. Wilson-Higgins, S. (2018). Trends in book manufacturing on-demand. The Impact of Print-On-Demand on Academic Books, 119–132. doi: http://doi.org/10.1016/b978-0-08-102011-1.00009-2
  3. Jerman, P. Reflections on Book Structure-Part 3-Spine Control. Available at: https://www.pinterest.com/pin/194358540139328159/
  4. Kornilov, I. K. (2001). Proektirovanie knizhnykh konstrukcii. Moscow: Izd-vo MGUP, 212.
  5. Paliukh, O. O. (2017). Eksperymentalne vyznachennia mitsnosti skleienykh zrazkiv paperu i kartonu dlia vyhotovlennia knyzhkovo-zhurnalnykh obkladynok i paliturok riznykh konstruktsii. Tekhnolohiia i tekhnika drukarstva, 4, 11–24.
  6. Clark, T. (2007). Bookbinding with adhesives. GRAW-HILL Book Company Europe, 53.
  7. Gromyko, I. G., Marchenko, I. V. (2018). Vliianie struktury materialov na formirovanie adgezionnogo shva i kogezionnoi prochnosti kleevogo sloia v koreshke bloka. Trudy BGTU, 4 (1), 14–19.
  8. Marchenko, I. V., Dolgova, T. A. (2010). Issledovanie proiavlenii strukturnoi neodnorodnosti bumagi pri pressovanii knizhnykh polufabrikatov i knig. Trudy BGTU. Seriia 4: Print i mediatekhnologii, 31–34.
  9. Kulak, M., Piontukh, I., Bobrova, O. (2000). CHto my znaem o bumage: fraktalnaia paradigma. Tekhnologii pererabotki i upakovki, 3 (5), 26–27.
  10. Mishurina, O. A., Mullina, E. R., Chuprova, L. V., Ershova, O. V., Chernyshova, E. P., Permyakov, M. B., Krishan, A. L. (2015). Сhemical aspects of hydrophobization technology for secondary cellulose fibers at the obtaining of packaging papers and cardboards. International Journal of Applied Engineering Research, 10 (24), 44812–44814.
  11. Mir znanii. Polimery 3. Available at: http://mirznanii.com/a/326348/polimery-3
  12. Mullina, E. R., Ershova, O. V. (2016). Processy adgezii i gidrofobizacii pri proizvodstve gofrokartona. Mezhdunarodnii zhurnal prikladnykh i fundamentalnykh issledovanii, 10 (3), 367–370. Available at: https://applied-research.ru/ru/article/view?id=10350
  13. Havenko, S. F. (2012). Kynetyka poshkodzhennia i ruinuvannia kleiovykh ziednan pry ekspluatatsii. Polihrafiia i vydavnycha sprava, 3, 91–96.
  14. Vorobev, D. V. (2000). Tekhnolohyia poslepechatnikh protsessov. Moscow: MHUP, 393.
  15. Kibirkstis, E., Havenko, S., Gegeckienė, L., Khadzhynova, S., Kadyliak, M. (2019). Influence of Structure and Physical-Mechanical Characteristics of Threads on the Strength of Binding the Books. Mechanics, 25 (4), 313–319. doi: http://doi.org/10.5755/j01.mech.25.4.22774
  16. Paliukh, O. O. (2019). The Device Design and the Measuring Technique of the Rigidity of Binding Materials for the Manufacture of Integral and Semi-Rigid Covers. Technology and Technique of Typography, 2, 4–14.
  17. Paliukh, О. О. (2019). Investigation of the Influence of Discrete Adhesive Application on the Strength of Semi-Rigid Book-Magazine Covers. Technology and Technique of Typography, 3, 25–42.

Downloads

Published

2020-08-31

How to Cite

Paliukh, O., Kyrychok, P., & Dziadyk, Y. (2020). Analysis of the influence of binding adhesives on the structural strength of integral and semi-rigid covers. Technology Audit and Production Reserves, 4(1(54), 38–43. https://doi.org/10.15587/2706-5448.2020.208937

Issue

Vol. 4 No. 1(54) (2020): Industrial and technology systems

Section

Reports on research projects

License

Copyright (c) 2020 Oleksandr Paliukh, Petro Kyrychok, Yevhenii Dziadyk

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.