Improvement of mixing processes in diesel engines

Authors

DOI:

https://doi.org/10.15587/2706-5448.2021.232050

Keywords:

additional power supply system, fuel equipment, alternative fuel, atomization quality, induction period, combustion efficiency

Abstract

The object of research is gas-dynamic vortex processes in heterogeneous polydisperse flows. One of the most problematic issues in engine building is the completeness of combustion and the rate of fuel burnout in the given coordinates on the allotted hourly interval in the combustion chamber. These indicators, in turn, determine stringent requirements for used fuels in terms of thermophysical parameters that affect sawing, evaporation and mixing with an oxidizer. In the course of the study, methods of mathematical modeling were used based on the theory of similarity. Methods have been developed for preparing a combustible mixture for detonation-free combustion of a cheap alternative fuel. A method for assessing the quality of spraying low cetane fuel is proposed. A mathematical model is obtained for calculating the change in the parameters of the quality of atomization and the differential characteristics of fuel injection. This is necessary for theoretical studies of gas-dynamic processes in additional power systems for diesel engines in an unsteady three-dimensional flow with variable parameters of a polydisperse flow of a combustible mixture. It has been proven that with a decrease in the camshaft rotational speed, the injection speed will be insufficient to achieve the required spray quality due to a decrease in the speed. This made it possible to redesign the additional system using a separate dual fuel supply. Research samples of an additional power supply system for the ЯМЗ–24 ОН diesel engine (Yaroslavl Motor Plant, Russia) have been developed. Comparative tests of the engine operation on stable gas condensate with the main fuel equipment and an additional system have been carried out. Oscillograms of the tests were obtained and analyzed.

The research results provided the basis for the use of low cetane cheap gas condensate in diesel engines. This will improve the economic, power and environmental performance of the engines. Compared to standard cetane fuels, the price of fuel will decrease by 40 %, engine power will increase by 20 %, and the environmental performance of exhaust gases will decrease by 10–30 %.

Author Biography

Ludmila Knaub, Military Academy

Doctor of Technical Sciences, Professor

Department of Engineering Mechanics

References

  1. Marchenko, A. P., Parsadanov, І. V., Lal, A. G. (2019). Scope and definition of reserves improve the efficiency of combustion in the opposite two-stroke diesel engine with opposite moving pistons. Internal Combustion Engines, 1, 21–26. doi: http://doi.org/10.20998/0419-8719.2019.1.04
  2. Weigand, P., Bikas, G. (2018). Prediction of Mixture Formation in Diesel Engines. MTZ Worldwide, 79 (7-8), 76–81. doi: http://doi.org/10.1007/s38313-018-0056-y
  3. Cernat, A., Pana, C., Negurescu, N., Lazaroiu, G., Nutu, C. (2020). The Influence of Hydrogen on Vaporization, Mixture Formation and Combustion of Diesel Fuel at an Automotive Diesel Engine. Sustainability, 13 (1), 202. doi: http://doi.org/10.3390/su13010202
  4. Kryshtopa, S., Panchuk, M., Kozak, F., Dolishnii, B., Mykytii, I., Skalatska, O. (2018). Fuel economy raising of alternative fuel converted diesel engines. Eastern-European Journal of Enterprise Technologies, 4 (8 (94)), 6–13. doi: http://doi.org/10.15587/1729-4061.2018.139358
  5. Hazar, H., Temizer, I. (2013). Analysis of methanol and organometallic MnO2fuels as alternative fuels in a diesel engine. International Journal of Sustainable Engineering, 7 (1), 34–40. doi: http://doi.org/10.1080/19397038.2013.774069
  6. Rahman, M., Rasul, M., Hassan, N., Hyde, J. (2016). Prospects of Biodiesel Production from Macadamia Oil as an Alternative Fuel for Diesel Engines. Energies, 9 (6), 403. doi: http://doi.org/10.3390/en9060403
  7. Arjomandi, M., Xue, Y. (2007). An investigation of the effect of hot end plugs on efficiency of the vortex tube. Journal of Engg science and technology, 2 (3), 211–217.
  8. Abdelghany, S. T., Kandil, H. A. (2018). Effect of Geometrical Parameters on the Coefficient of Performance of the Ranque-Hilsch Vortex Tube. OALib, 5 (2), 1–17. doi: http://doi.org/10.4236/oalib.1104347
  9. Knaub, L. V. (2017). Low power vortex separatorheterogeneous mixtures. Ahrarnyi Visnyk Prychornomoria, 80, 128–137.
  10. Knaub, L. V. (2003). Gazodinamicheskie protsessy v vikhrevykh apparatakh. Odessa: Astroprint, 279.

Downloads

Published

2021-06-30

How to Cite

Knaub, L. (2021). Improvement of mixing processes in diesel engines. Technology Audit and Production Reserves, 3(1(59), 16–18. https://doi.org/10.15587/2706-5448.2021.232050

Issue

Section

Mechanics: Reports on Research Projects