Cost estimation of photopolymer resin for 3D exposure of circuit boards
DOI:
https://doi.org/10.15587/2706-5448.2022.256538Keywords:
circuit boards, photolithography, photopolymer exposure, additive technology, DLP, LCD, photo masksAbstract
The research object in the work is the printed circuit boards (PCB) Production technological process using the additive technology of photopolymer 3D printing. The existing problem is that the manufacturing process of single-sided and double-sided PCBs, simple in technology, from the third to the fifth accuracy class, requires the use of a large amount of consumables and technological equipment. In turn, this affects the cost of the product. The research subject is models and methods for manufacturing PCB using photopolymer 3D printing.
In order to reduce the cost of materials: film or aerosol photoresist, as well as reduce the number of technological operations, applying photoresist and for the manufacture of PCBs stencils, it is proposed to use photopolymer 3D printing technologies for the manufacture of PCBs. The paper analyzes the costs of Plexiwire Resin Basic Orange Transparen photopolymer resin for the manufacture of single-sided PCBs and calculates the cost of the consumable (resin) compared to the costs of dry film photoresist. 60 % cost of consumables (photopolymer resin) compared to dry film photoresist for making single-sided PCBs. The work is aimed at determining the dependence of the geometric dimensions of the PСВs topology and the consumption of photopolymer resin on the technological parameters of photopolymer exposure. A regression correlation model of the dependence of resin consumption on exposure parameters has been developed and correlation coefficients have been calculated. It has been established that with an increase in the exposure time of the photopolymer resin, the consumption of the photopolymer resin increases and the deviation of the geometric dimensions of the PCBs topology increases, which in turn negatively affects the quality of the product. Therefore, using the obtained regression model, it is possible to calculate the influence of parameters on the PCB topology and reduce the deviation of conductor sizes and resin consumption.
References
- Martinelli, A., Mina, A., Moggi, M. (2021). The enabling technologies of industry 4.0: examining the seeds of the fourth industrial revolution. Industrial and Corporate Change, 30 (1), 161–188. doi: http://doi.org/10.1093/icc/dtaa060
- Carvalho, N., Chaim, O., Cazarini, E., Gerolamo, M. (2018). Manufacturing in the fourth industrial revolution: A positive prospect in Sustainable Manufacturing. Procedia Manufacturing, 21, 671–678. doi: http://doi.org/10.1016/j.promfg.2018.02.170
- Fakhar Manesh, M., Pellegrini, M. M., Marzi, G., Dabic, M. (2021). Knowledge Management in the Fourth Industrial Revolution: Mapping the Literature and Scoping Future Avenues. IEEE Transactions on Engineering Management, 68 (1), 289–300. doi: http://doi.org/10.1109/tem.2019.2963489
- Andronie, M., Lăzăroiu, G., Iatagan, M., Hurloiu, I., Dijmărescu, I. (2021). Sustainable Cyber-Physical Production Systems in Big Data-Driven Smart Urban Economy: A Systematic Literature Review. Sustainability, 13 (2), 751. doi: http://doi.org/10.3390/su13020751
- Nevliudov, I., Yevsieiev, V., Baker, J. H., Ahmad, M. A., Lyashenko, V. (2021). Development of a cyber design modeling declarative Language for cyber physical production systems. Journal of Mathematical and Computational Science, 11 (1), 520–542. doi: http://doi.org/10.28919/jmcs/5152
- Lins, T., Oliveira, R. A. R. (2020). Cyber-physical production systems retrofitting in context of industry 4.0. Computers & Industrial Engineering, 139, 106193. doi: http://doi.org/10.1016/j.cie.2019.106193
- Jabil Circuit Ukraine. Uzhgorod. Available at: https://www.jabil.com/contact/locations/uzhgorod.html
- Hao, J., Wang, Y., Wu, Y., Guo, F. (2020). Metal recovery from waste printed circuit boards: A review for current status and perspectives. Resources, Conservation and Recycling, 157, 104787. doi: http://doi.org/10.1016/j.resconrec.2020.104787
- Pietrelli, L., Ferro, S., Vocciante, M. (2019). Eco-friendly and cost-effective strategies for metals recovery from printed circuit boards. Renewable and Sustainable Energy Reviews, 112, 317–323. doi: http://doi.org/10.1016/j.rser.2019.05.055
- Liu, X., Fiedler, H., Gong, W., Wang, B., Yu, G. (2018). Potential sources of unintentionally produced PCB, HCB, and PeCBz in China: A preliminary overview. Frontiers of Environmental Science & Engineering, 12 (6). doi: http://doi.org/10.1007/s11783-018-1036-9
- Zelentsov, S. V., Zelentsova, N. V. (2006). Modern photolithography. New materials for electronics and optoelectronics for information and telecommunication systems. Nizhny Novgorod, 56.
- Nevlyudov, I., Nikitin, D., Bliznyuk, D., Gurin, D., Razumov-Frizyuk, E, Sagittarius, E. (2020). Production of printed circuit boards using 3D printing technologies. Collection of scientific works of the National University of Shipbuilding named after Admiral Makarov, 4 (482).
- Nevlyudov, I., Nikitin, D., Bliznyuk, D., Gurin, D., Razumov-Frizyuk, E., Sagittarius, E. (2021). Creation of PCB layout using photopolymer additive technologies of 3D printing. Problems of friction and wear, 1 (90), 42–54.
- Jacobsen, A., Jorgensen, T., Tafjord, Ø., Kirkhorn, E. (2015). Concepts for 3D print productivity systems with advanced DLP photoheads. Emerging Digital Micromirror Device Based Systems and Applications VII. doi: http://doi.org/10.1117/12.2084962
- Redwood, B., Garrat, B., Chauffeur, P. (2020). 3D printing. A Practical Guide. Moscow: DMK-Press, 220.
- Anycubic 405nm UV. Available at: https://3dreams.com.ua/product/фотополимерная-смола-anycubic-405nm-uv-resin/
- Plexiwire Resin Basic Orange Transparen. Available at: https://shop.plexiwire.com.ua/ru/basic-resin/resin-orange-transparent-500/
- MonoFilament Basic. Available at: https://monofilament.com.ua/ua/products/fotopolimernie-smoli-dlya-3d-printera/resin-basic/
- FunToDo. Available at: https://www.funtodo.net
- Wanhao Castable. Available at: https://wanhao.store/products/wanhao-castable-resin-for-jewelry-green-color-1000ml-bottle
- BlueCast CR3A. Available at: https://www.uvelirmag.com/3d-printery-i-polimery/bluecast-cr3a-for-lcddlp-3dp/
- Elegoo 3D. Available at: https://www.elegoo.com/collections/resin
- Weistek. Available at: https://www.amazon.com/Standard-UV-Curing-Precision-Photopolymer-Printing/dp/B08L6P5PNK
- Tevo. Available at: https://3ddevice.com.ua/product/smola-dlia-3d-printera-nextdent-base/
- Salcedo, J., McCormick, K. (2020). SPSS Statis for Dumlmies. John&Sons. Inc., 444.
- Reddy, M. V. (2019). Statistical Methods in Psychiatry Research and SPSS. Apple Academic Press, 442. doi: http://doi.org/10.1201/9780429023309
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2022 Igor Nevliudov, Ievgenii Razumov-Fryziuk, Vladyslav Yevsieiev, Dmytro Nikitin, Danylo Blyzniuk, Roman Strelets
This work is licensed under a Creative Commons Attribution 4.0 International License.
The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.
