Optimization of heat-moisture treatment on potato starch and study on its physicochemical properties

Authors

DOI:

https://doi.org/10.15587/2706-5448.2022.260149

Keywords:

heat-moisture treatment (HMT), setback viscosity, textural properties, viscosity properties, retrogradation, native potato starch

Abstract

The object of research is the technology of modified potato starch obtained by heat-moisture treatment. Heat-moisture treatment (HMT) of starch is a hydrothermal treatment technique to modify their functional properties. Setback viscosity of potato starch gelatinization characteristic is the key factor that influences the quality of potato starch noodle. In order to obtain a green, safe and highly efficient potato starch product for vermicelli production, this study take setback viscosity as response value, a Box-Behnken model was established on the basis of single factor experiment results to optimize the modify technique. A response surface analysis was used to investigate the effects of moisture content of starch, heat-moisture treatment temperature and heat-moisture treatment time on setback viscosity of heat-moisture treatment modified potato starch. The viscosity properties, textural properties and retrogradation characteristics of HMT starch gel were estimated.

The results of response surface methodology showed the optimal parameters of HMT were that moisture content of potato starch was 23.56 %, heat-moisture treatment temperature was 90 °C, and heat-moisture treatment time was 1.5 h. Under such conditions, setback viscosity of heat-moisture treatment modified potato starch (HMTS) paste was 3677 cP, which was higher than native starch (496 cP) obviously, indicating that the gel strength and hardness of potato starch was improved significantly. Compared with native potato starch (NS), HMTS had lower peak viscosity (2966 cP), lower hold viscosity (2882 cP) and lower breakdown viscosity (84.50 cP), but higher paste temperature (71.08 °C), higher final viscosity (6559 cP) and setback viscosity(3677 cP). The results of retrogradation was consistent with the viscosity properties, all of which indicating that potato starch modified by heat-moisture treatment was more prone to retrogradation. TPA tests demonstrated that HMT can enhance the textural properties of starch gel. Compared with native starch (NS) gel, the hardness, cohesiveness, gumminess, chewiness and resilience of heat-moisture treatment starch (HMTS) gel were increased significantly, and there was no significant difference in springiness. Compared with native starch gel, heat-moisture treatment starch gel had better functional properties.

Supporting Agency

  • The authors gratefully acknowledge the financial support received from the Middle-aged and Young Teachers’ Basic Ability Promotion Project of Guangxi (Grant No. 2021KY0710) and the National Key R&D Program of China (Grant No. 2018YFD0901003). The authors would like to thank to Guangxi Key Laboratory of Health Care Food Science and Technology for providing laboratory facilities and technical support in this work.

Author Biographies

Chunli Deng, Sumy National Agrarian University; Hezhou University

Postgraduate Student

Department of Food Technology;

College of Food and Biological Engineering

Oksana Melnyk, Sumy National Agrarian University

PhD, Associate Professor

Department of Food Technology

Yanghe Luo, Hezhou University

PhD, Professor

Institute of Food Science and Engineering Technology

References

  1. Jambrak, A. R., Herceg, Z., Šubarić, D., Babić, J., Brnčić, M., Brnčić, S. R., Bosiljkov, T. et. al. (2010). Ultrasound effect on physical properties of corn starch. Carbohydrate Polymers, 79 (1), 91–100. doi: https://doi.org/10.1016/j.carbpol.2009.07.051
  2. Miao, M., Li, R., Huang, C., Ye, F., Jiang, B., Zhang, T. (2015). Structural modification and characterisation of a sugary maize soluble starch particle after double enzyme treatment. Carbohydrate Polymers, 122, 101–107. doi: http://doi.org/10.1016/j.carbpol.2014.12.078
  3. Sui, Z., Yao, T., Zhao, Y., Ye, X., Kong, X., Ai, L. (2015). Effects of heat–moisture treatment reaction conditions on the physicochemical and structural properties of maize starch: Moisture and length of heating. Food Chemistry, 173, 1125–1132. doi: http://doi.org/10.1016/j.foodchem.2014.11.021
  4. Yadav, B. S., Guleria, P., Yadav, R. B. (2013). Hydrothermal modification of Indian water chestnut starch: Influence of heat-moisture treatment and annealing on the physicochemical, gelatinization and pasting characteristics. LWT – Food Science and Technology, 53 (1), 211–217. doi: http://doi.org/10.1016/j.lwt.2013.02.007
  5. Vamadevan, V., Hoover, R., Bertoft, E., Seetharaman, K. (2014). Hydrothermal treatment and iodine binding provide insights into the organization of glucan chains within the semi-crystalline lamellae of corn starch granules. Biopolymers, 101 (8), 871–885. doi: http://doi.org/10.1002/bip.22468
  6. Wang, H., Ding, J., Xiao, N., Liu, X., Zhang, Y., Zhang, H. (2020). Insights into the hierarchical structure and digestibility of starch in heat-moisture treated adlay seeds. Food Chemistry, 318, 126489. doi: http://doi.org/10.1016/j.foodchem.2020.126489
  7. Chung, H.-J., Cho, A., Lim, S.-T. (2012). Effect of heat-moisture treatment for utilization of germinated brown rice in wheat noodle. LWT, 47 (2), 342–347. doi: http://doi.org/10.1016/j.lwt.2012.01.029
  8. Yoenyongbuddhagal, S., Noomhorm, A. (2002). Effect of Physicochemical Properties of High-Amylose Thai Rice Flours on Vermicelli Quality. Cereal Chemistry Journal, 79 (4), 481–485. doi: http://doi.org/10.1094/cchem.2002.79.4.481
  9. Tang, L., Zhang, J., Li, Y. P., Liao, L. Y. (2019). Effects of heat moisture treatment on the properties of rice flour and its noodles at different moisture contents. Hunan Agricultural Sciences, 2, 85–88. Available at: http://www.cnki.com.cn/Article/CJFDTOTAL-HNNK201902025.htm
  10. Tan, H. Z., Tan, B., Liu, M., Tian, X. H., Gu, W. Y. (2009). Relationship between properties of sweet potato starch and qualities of sweet potato starch noodles. Transactions of the CSAE, 25 (4), 286–292. Available at: http://www.cnki.com.cn/Article/CJFDTOTAL-NYGU200904056.htm
  11. Deng, C. L., Melnyk, O., Luo, Y. H. (2021). The effect of heat-moisture treatment conditions on the structure properties and functionalities of potato starch. Potravinarstvo Slovak Journal of Food Sciences, 15, 824–834. doi: http://doi.org/10.5219/1647
  12. Sui, Z., Yao, T., Zhao, Y., Ye, X., Kong, X., Ai, L. (2015). Effects of heat–moisture treatment reaction conditions on the physicochemical and structural properties of maize starch: Moisture and length of heating. Food Chemistry, 173, 1125–1132. doi: http://doi.org/10.1016/j.foodchem.2014.11.021
  13. Irani, M., Razavi, S. M. A., Abdel-Aal, E.-S. M., Hucl, P., Patterson, C. A. (2019). Viscoelastic and textural properties of canary seed starch gels in comparison with wheat starch gel. International Journal of Biological Macromolecules, 124, 270–281. doi: http://doi.org/10.1016/j.ijbiomac.2018.11.216
  14. Zavareze, E. da R., Dias, A. R. G. (2011). Impact of heat-moisture treatment and annealing in starches: A review. Carbohydrate Polymers, 83 (2), 317–328. doi: http://doi.org/10.1016/j.carbpol.2010.08.064
  15. Miu, M. (2009). Research on the characteristics of slow digestion starch and its formation mechanism. Jiangnan University. Available at: https://cdmd.cnki.com.cn/article/cdmd-10295-2009250273.htm
  16. Li, S. L., Deng, X. C., Gao, Q. Y. (2021). Preparation and characteristic analysis of particle type resistance starch. Transactions of the Chinese Society of Agricultural Engineering, 27 (5), 385–391. Available at: https://www.cnki.com.cn/Article/CJFDTOTAL-NYGU201105068.htm
  17. Kennedy, J. F., Panesar, P. S. (2005). Starch in food: structure, functions and applications. Carbohydrate Polymers, 61 (3), 383–384. doi: http://doi.org/10.1016/j.carbpol.2005.05.006
  18. Zhu, F., Mojel, R., Li, G. (2018). Physicochemical properties of black pepper (Piper nigrum) starch. Carbohydrate Polymers, 181, 986–993. doi: http://doi.org/10.1016/j.carbpol.2017.11.051
  19. Karim, A. A., Nadiha, M. Z., Chen, F. K., Phuah, Y. P., Chui, Y. M., Fazilah, A. (2008). Pasting and retrogradation properties of alkali-treated sago (Metroxylon sagu) starch. Food Hydrocolloids, 22 (6), 1044–1053. doi: http://doi.org/10.1016/j.foodhyd.2007.05.011
  20. Liao, L. Y., Wu, W. G. (2014). Relationship between gelatinization and gel properties of different starch and their noodles. Transaction of the Chinese Society of Agricultural Engineering, 30 (15), 332–338. Available at: https://www.cnki.com.cn/Article/CJFDTOTAL-NYGU201415042.htm
  21. Choi, S. G., Kerr, W. L. (2003). Water mobility and textural properties of native and hydroxypropylated wheat starch gels. Carbohydrate Polymers, 51 (1), 1–8. doi: http://doi.org/10.1016/s0144-8617(02)00083-8
  22. Teng, L. Y., Chin, N. L., Yusof, Y. A. (2013). Rheological and textural studies of fresh and freeze-thawed native sago starch–sugar gels. II. Comparisons with other starch sources and reheating effects. Food Hydrocolloids, 31 (2), 156–165. doi: http://doi.org/10.1016/j.foodhyd.2012.11.002
  23. Bourne, M. C. (2002). Food Texture and Viscosity. Chapter 1 – Texture, Viscosity, and Food. London: Academic Press, 1–32. doi: http://doi.org/10.1016/b978-012119062-0/50001-2
  24. Farahnaky, A., Azizi, R., Majzoobi, M., Mesbahi, G., Maftoonazad, N. (2013). Using power ultrasound for cold gelation of kappa-carrageenan in presence of sodium ions. Innovative Food Science & Emerging Technologies, 20, 173–181. doi: http://doi.org/10.1016/j.ifset.2013.06.002
  25. Zhang, Y., Zhang, K. Y., Zhang. G. Z. (2019). Research Progress on Starch Retrogradation Process Mechanism and Application of Starch Anti- retrogradation Agent. Scinece and Technology of Food Industry, 40 (13), 316–321. doi: https://doi.org/10.13386/j.issn1002-0306.2019.13.053

Downloads

Published

2022-06-30

How to Cite

Deng, C., Melnyk, O., & Luo, Y. (2022). Optimization of heat-moisture treatment on potato starch and study on its physicochemical properties. Technology Audit and Production Reserves, 3(3(65), 43–49. https://doi.org/10.15587/2706-5448.2022.260149

Issue

Vol. 3 No. 3(65) (2022): Chemical engineering

Section

Food Production Technology: Reports on Research Projects

License

Copyright (c) 2022 Chunli Deng, Oksana Melnyk, Yanghe Luo

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.