Effect of alkohols as hardening-accelerating admixtures on the cement properties

Authors

  • Ганна Юріївна Флейшер National Technical University of Ukraine "Kyiv Polytechnic Institute", 37, Prospect Peremohy, 03056, Kyiv-56, Ukraine https://orcid.org/0000-0002-2904-1338
  • Володимир Володимирович Токарчук National Technical University of Ukraine "Kyiv Polytechnic Institute", 37, Prospect Peremohy, 03056, Kyiv-56, Ukraine https://orcid.org/0000-0001-8858-6533
  • Олександр Іванович Василькевич National Technical University of Ukraine "Kyiv Polytechnic Institute", 37, Prospect Peremohy, 03056, Kyiv-56, Ukraine https://orcid.org/0000-0003-0253-9926
  • Валентин Анатолійович Свідерський National Technical University of Ukraine "Kyiv Polytechnic Institute", 37, Prospect Peremohy, 03056, Kyiv-56, Ukraine https://orcid.org/0000-0002-4457-6875

DOI:

https://doi.org/10.15587/2312-8372.2014.26219

Keywords:

hydration, accelerating admixture, complex additive, alcohol, superplasticizer, compressive strength, hardening time

Abstract

The effect of alcohols as hardening-accelerating admixtures on physicomechanical properties of cement, particularly strength indexes in early hardening period is investigated. Alcohols can be used as an effective hardening accelerators of cement. The effectiveness of the influence of alcohols on the cement properties depends on their spatial structure and the number of hydroxyl groups. It was found that the largest increase in the cement strength is promoted by individual admixtures of alcohols with 2-3 hydroxyl groups (ethylene glycol and glycerol). Comparative analysis has revealed that alcohols behave as hardening accelerators only in the early periods (up to 3 days, especially on the 1st day), and known and widely used accelerator - calcium chloride, on the contrary, has no influence on the strength development on the 1st day of hardening, but contributes to a significant increase in strength on the 3-28 day. It was found that alcohols can be used as components of complex additives. The influence of alcohol on the cement strength in the complex additive “superplasticizer + hardening accelerator” was studied. It was found that the effectiveness of alcohols as accelerators is strongly affected by the components of complex additives since the best results were in modifying superplasticizer by ethanol, which had no significant effect on the cement strength as an individual additive.

Alcohols are effective chemical additives that can be used as hardening accelerators, both individually, and as part of multi-component additives.

Author Biographies

Ганна Юріївна Флейшер, National Technical University of Ukraine "Kyiv Polytechnic Institute", 37, Prospect Peremohy, 03056, Kyiv-56

Postgraduate

Department of Chemical Technology of Composite Materials

Володимир Володимирович Токарчук, National Technical University of Ukraine "Kyiv Polytechnic Institute", 37, Prospect Peremohy, 03056, Kyiv-56

Candidate of Technical Sciences, Associate Professor

Department of Chemical Technology of Composite Materials

Олександр Іванович Василькевич, National Technical University of Ukraine "Kyiv Polytechnic Institute", 37, Prospect Peremohy, 03056, Kyiv-56

Candidate of Chemical Sciences, Associate Professor

Department of Organic Chemistry and Technology of Organic Substances

Валентин Анатолійович Свідерський, National Technical University of Ukraine "Kyiv Polytechnic Institute", 37, Prospect Peremohy, 03056, Kyiv-56

Doctor of Technical Sciences, Professor

Department of Chemical Technology of Composite Materials

References

  1. Aphanasiev, N. F., Tseluiko, M. K. (1989). Admixtures for concrete and mortars. Kiev, 128.
  2. Justnes, H. Calcium Nitrate as a Multifunctional Concrete Admixture. Available: http://www.tekna.no/arkiv/NB/Norwegian%20Concrete/calcium%20nitrate%20as%20a%20multifunctional.pdf. Last accessed 14.06.2014.
  3. DSTU B V.2.7-171:2008 (EN 934-2:2001, NEQ). Building materials. Admixtures for concrete and mortars. General specification. (2008). Kyiv: Minrehionbud Ukrainy, 93.
  4. Ruzhinskiy, S. Portik, A., Savinykh, A. (2006). Complete guide to foam concrete. Saint Petersburg, 630.
  5. Scanlon, J. M. Accelerating admixtures for cold weather concreting. Available: http://www.concreteconstruction.net/concrete-articles/accelerating-admixtures-for-cold-weather-concreti.aspx. Last accessed 14.06.2014.
  6. Izotov, V. S., Sokolov, U. A. (2006). Chemical admixtures for concrete modification. Moscow, 244.
  7. Justnes, H., Nygaard, E. C. (1995). Technical calcium nitrate as set accelerator for cement at low temperatures. Cement and Concrete Research, 25(8), 1766–1774. doi:10.1016/0008-8846(95)00172-7.
  8. Sounthararajan, V. M., Shivakumar, A. (2013). Effect of Calcium Nitrate on the Pozzolanic Properties of High Early Strength Concrete. Research Journal of Applied Scinces, Engineering and Technology, 6 (13), 2502–2508.
  9. Nonchloride accelerating admixtures. Available: http://www.concreteconstruction.net/Images/Nonchloride%20Accelerating%20Admixtures_tcm45-346447.pdf. Last accessed 14.06.2014.
  10. Quy, N. N., Lam, N. T. The effect of triethanolamine and limestone powder on strength development and formation of hardened Portland cement structure. Available: http://www.jsce.or.jp/committee/concrete/e/newsletter/newsletter05/10-Vietnam%20Joint%20Seminar(Quy%20and%20LAM).pdf. Last accessed 14.06.2014.

Published

2014-07-24

How to Cite

Флейшер, Г. Ю., Токарчук, В. В., Василькевич, О. І., & Свідерський, В. А. (2014). Effect of alkohols as hardening-accelerating admixtures on the cement properties. Technology Audit and Production Reserves, 4(1(18), 31–36. https://doi.org/10.15587/2312-8372.2014.26219

Issue

Section

Technology audit