Retrospective analysis of array of the published patents, characterizing development of the cast-rolling modules at 2000-2013 in Ukraine and Russia

Authors

  • Николай Николаевич Бережной State institution of higher education «Kryvyi Rih National University», 11, XXII Partz’yizdu str., Kryvyi Rih, 50027, Ukraine, Ukraine https://orcid.org/0000-0001-6219-980X
  • Виктория Анатольевна Чубенко State institution of higher education «Kryvyi Rih National University», 11, XXII Partz’yizdu str., Kryvyi Rih, 50027, Ukraine, Ukraine https://orcid.org/0000-0002-0010-6142
  • Алла Анатольевна Хиноцкая State institution of higher education «Kryvyi Rih National University», 11, XXII Partz’yizdu str., Kryvyi Rih, 50027, Ukraine, Ukraine https://orcid.org/0000-0003-0735-0583
  • Сергей Олегович Мацышин State institution of higher education «Kryvyi Rih National University», 11, XXII Partz’yizdu str., Kryvyi Rih, 50027, Ukraine, Ukraine https://orcid.org/0000-0002-1255-4938
  • Анна Александровна Шепель State institution of higher education «Kryvyi Rih National University», 11, XXII Partz’yizdu str., Kryvyi Rih, 50027, Ukraine, Ukraine https://orcid.org/0000-0002-7951-3567
  • Валерий Андреевич Чубенко State institution of higher education «Kryvyi Rih National University», 11, XXII Partz’yizdu str., Kryvyi Rih, 50027, Ukraine, Ukraine https://orcid.org/0000-0002-0280-0445

DOI:

https://doi.org/10.15587/2312-8372.2015.36167

Keywords:

rolling production, casting and rolling unit, number of patents, retrospective analysis, technological process

Abstract

It is performed a retrospective research of an array of published patents, characterizing the development of the casting-rolling units for the period 2000-2013 in Ukraine and Russia. These researches identify the relevance of the work to improve the casting-rolling units, the dynamics of the rolling production in general and the production of steel in the casting-rolling unit, which allowed to determine the direction of future research.

The research showed that during this period there is a continuous development and improvement of the combined processes of casting-rolling both in Ukraine and in Russia. In Ukraine in 2004 the intensity of the development of this area has increased, reached a peak in 2010, in 2013 decreased slightly, but it was no less than 2004. These researches have allowed to identify disadvantages in the development of casting-rolling units, which are as high temperature of metal casting. It is therefore necessary to make decisions that will reduce the ability to quickly become overheated during casting and create the additional crystallization centers inside the metal.

Author Biographies

Николай Николаевич Бережной, State institution of higher education «Kryvyi Rih National University», 11, XXII Partz’yizdu str., Kryvyi Rih, 50027, Ukraine

Doctor of Technical Science, Professor

Department of Metal Pressure Working and Metallurgical Equipment

Виктория Анатольевна Чубенко, State institution of higher education «Kryvyi Rih National University», 11, XXII Partz’yizdu str., Kryvyi Rih, 50027, Ukraine

Candidate of Technical Science, Associate Professor

Department of Metal Pressure Working and Metallurgical Equipment

Алла Анатольевна Хиноцкая, State institution of higher education «Kryvyi Rih National University», 11, XXII Partz’yizdu str., Kryvyi Rih, 50027, Ukraine

Senior teacher

Department of Metal Pressure Working and Metallurgical Equipment

Сергей Олегович Мацышин, State institution of higher education «Kryvyi Rih National University», 11, XXII Partz’yizdu str., Kryvyi Rih, 50027, Ukraine

Postgraduate student, Assistant

Department of Metal Pressure Working and Metallurgical Equipment

Анна Александровна Шепель, State institution of higher education «Kryvyi Rih National University», 11, XXII Partz’yizdu str., Kryvyi Rih, 50027, Ukraine

Postgraduate student

Department of Metal Pressure Working and Metallurgical Equipment

References

  1. Danchenko, V. N. (2011). Progressivnye protsessy obrabotki metallov davleniem. Metallurgicheskaia i gornorudnaia promyshlennost', № 7, 1-8.
  2. Minaev, A. A. (2008). Sovmeshchennye metallurgicheskie protsessy. Donetsk: Tehnopark Don GTU UNITEH, 522.
  3. Minaev, A. A., Konovalov, Yu. V. (2011). Vozrozhdenie metallurgii na Ukraine nevozmozhno bez prioritetnogo razvitiia prokatnogo proizvodstva. Metallurgicheskaia i gornorudnaia promyshlennost', № 7, 143-144.
  4. Alzetta, F. (2002). «Luna»: The Danicli ECR Endless Casting Rolling Plant for Specialty Steels-Technology, Innovation and Benefits. Iron and Steelmaker, № 7, 41-49.
  5. Мinamimura, Y., Kanasawa, T., Tsujita, K. (2001). Latest technology for cost and productivity of QSP process. SEAISI Quarterly, V. 30, №2, 10-15.
  6. Karboni, A., Pigani, A., Megahed, G., Pol', S. K. (2007). Nepreryvnoe lit'e i prokatka tonkih sliabov iz stalei klassa ARІ H70 dlia primeneniia v arkticheskih usloviiah. Chernye metally, № 7, 51-54.
  7. Tonkonogov, V. Ya., Chebotariov, V. A., Gessler, Yu. V., Samsonov, A. V., Degtiariov, I. L.; Patent holder: Otkrytoe aktsionernoe obshchestvo Aktsionernaia holdingovaia kompaniia "Vserossiiskii nauchno-issledovatel'skii i proektno-konstruktorskii institut metallurgicheskogo mashinostroeniia imeni akademika Tselikova" (OAO AHK "VNIIMETMASh") (RU). (20.11.2012). Pat. № 2466808 Rossiiskaia Federatsiia, MPK V21V1/46. Liteino-prokatnyi agregat dlia proizvodstva listovoi holodnokatanoi produktsii iz aliuminiia i ego splavov. Appl. 26.06.2011.
  8. Stalinskii, D. V., Pavlenko, A. A., Tishchenko, A. A., Denisenko, D. V., Rudiuk, A. S., Vaganov, Yu. A., Arih, V. S.; Patent holder: Gosudarstvennoe predpriiatie "Ukrainskii nauchno-tehnicheskii tsentr metallurgicheskoi promyshlennosti "Energostal'" (GP "UkrNTTs "Energostal'") (UA). (20.10.2013). Pat. № 2495730 Rossiiskaia Federatsiia, MPK V21V1/46. Staleprokatnyi kompleks metallurgicheskogo mini-zavoda. Appl. 20.03.2012.
  9. Shum, V. B., Smіrnov, Ye. M., Yemchenko, A. V., Aleksieiev, O. V., Asikіn, A. A.; VAT "Donets'kii metalurgіinii zavod"(26.04. 2011). Patent Ukrayni № 58851 MPK V21V1/16. Sposіb prokatki bezperervno litoi zagotovki. Appl. 21.10.2010. Biul. № 8. Available: http://uapatents.com/4-58851-sposib-prokatki-bezperervnolito-zagotovki.html
  10. Zatulovskii, S. S. (1981). Suspenzionnaia razlivka. K.: Naukova dumka, 260.

Downloads

Published

2015-01-29

How to Cite

Бережной, Н. Н., Чубенко, В. А., Хиноцкая, А. А., Мацышин, С. О., Шепель, А. А., & Чубенко, В. А. (2015). Retrospective analysis of array of the published patents, characterizing development of the cast-rolling modules at 2000-2013 in Ukraine and Russia. Technology Audit and Production Reserves, 1(1(21), 4–7. https://doi.org/10.15587/2312-8372.2015.36167

Issue

Vol. 1 No. 1(21) (2015): Mechanical engineering and machine building. Energy, energy-saving technologies and equipment

Section

Mechanical engineering and machine building

License

Copyright (c) 2016 Николай Николаевич Бережной, Виктория Анатольевна Чубенко, Алла Анатольевна Хиноцкая, Сергей Олегович Мацышин, Анна Александровна Шепель, Валерий Андреевич Чубенко

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.