Defining and classification of the soft projects as a base for their scope planning

Authors

  • Сергей Алексеевич Кондратов Institute of Chemical Technology, Volodymyr Dahl’s East Ukrainian National University, Lenina street 31, Rubezhnoye, Luhans'ka oblast, 93010, Ukraine https://orcid.org/0000-0002-1963-0155
  • Джамал Мохаммед Аль Хамадани Institute of Chemical Technology, Volodymyr Dahl’s East Ukrainian National University, Lenina street 31, Rubezhnoye, Luhans'ka oblast, 93010, Ukraine

DOI:

https://doi.org/10.15587/2312-8372.2015.38048

Keywords:

benzene nitration, stationary process, soft model, uncertainty effect, output variables

Abstract

On the basis of deterministic model in the form of a system of nonlinear equations it is developed a "soft" model of stationary process of benzene nitration with a mixture of nitric and sulfuric acids in the reactor of ideal mixing, which allows to take into account the effect of uncertainty of input variables of the process on output variables: stationary temperature and conversion degree. The model algorithm is random assignment of input variables: speed and the heat of reaction and heat loss coefficient of the probable range of admissible values and solving the system of equations of the model for given values of regulate parameters and random allowable value of residence time. The model is visualized as a bitmap image of the points on the plane and allows to take into account the uncertainty of input factors, such as the range of the lower and upper boundaries of the bitmap image ("thick line").

It was established that a decrease with increasing conversion module and its increase with increasing concentration of the waste sulfuric acid are occurred for the adiabatic and isothermal processes. However, in an adiabatic process, depending on the module, there is a significant increase in temperature significantly superior to the standard values (50-70 °C), even when the module is 12. Increasing the temperature of the mass in inlet from 20 to 40 °C also leads to significant increase in the degree of conversion and temperature the reactor outlet. With increasing the residence time is observed narrowing of the upper and lower boundaries of the fixed conversion rate and leveling of uncertainty.

Author Biographies

Сергей Алексеевич Кондратов, Institute of Chemical Technology, Volodymyr Dahl’s East Ukrainian National University, Lenina street 31, Rubezhnoye, Luhans'ka oblast, 93010

Dr. Sc. (Chemistry), Professor, Head of the department

Department of mathematics and computer technologies

 

Джамал Мохаммед Аль Хамадани, Institute of Chemical Technology, Volodymyr Dahl’s East Ukrainian National University, Lenina street 31, Rubezhnoye, Luhans'ka oblast, 93010

Postgraduate

References

  1. Zhilin, V., Zbarsky, V. (2006). Synthesis and technology of nitro derivatives of benzene and toluene. Russian Chemical Journal, V. 50, № 3, 104-115.
  2. Berkman, B. (1964). Industrial synthesis of aromatic nitro compounds and amines. М.: Chemistry, 344.
  3. Krasil’nikova, A., Kondratov, S. (2013). Modeling continuous adiabatic nitration of benzene. Eastern-European Journal Of Enterprise Technologies, 6(6(66)), 15-19. Available: http://journals.uran.ua/eejet/article/view/19128
  4. Perevalov, V., Koldobskii, G. (1997). The elements of the design and equipment of the manufacture of fine chemicals. М.: Chemistry, 154
  5. Planovskii, A. (1940). The special equipment of the industry of organic intermediates and dyes. M.–L.:GNTIChL, 192
  6. Verner, A. (1978, May 23). Continuous adiabatic process for the mononitration of benzene. United States Patent, № 4091042.
  7. Biggs, R. D., White, R. R. (1956, March). Rate of nitration of benzene with mixed acid. AIChE Journal, Vol. 2, № 1, 26–33. doi:10.1002/aic.690020106
  8. Zaldívar, J. M., Molga, E., Alós, M. A., Hernández, H., Westerterp, K. R. (1996, March). Aromatic nitrations by mixed acid. Fast liquid-liquid reaction regime. Chemical Engineering and Processing: Process Intensification, Vol. 35, № 2, 91–105. doi:10.1016/0255-2701(95)04119-2
  9. Quadros, P. A., Oliveira, N. M. C., Baptista, C. M. S. G. (2004, November). Benzene nitration: validation of heterogeneous reaction models. Chemical Engineering Science, Vol. 59, № 22-23, 5449–5454. doi:10.1016/j.ces.2004.07.107
  10. Quadros, P. A., Reis, M. S., Baptista, C. M. S. G. (2005, December). Different Modeling Approaches for a Heterogeneous Liquid−Liquid Reaction Process. Industrial & Engineering Chemistry Research, Vol. 44, № 25, 9414–9421. doi:10.1021/ie050205m
  11. Kondratov, S., Al Khamadani, M., Savyak, R. (2011). The modeling of the continuous nitration of benzene in the reactor of residence time variable. Bulletin of V. Dahl’s East-Ukrainian National university, № 10 (164), Р. 2, 132-141.
  12. Kondratov, S., Kovgan, A., Al Khamadani, M., Savyak, R. (2012). The modeling of the start-up phase of the continuous reactor of the nitration of benzene. Bulletin of V. Dahl’s East-Ukrainian National university, № 17 (188), 153-158.
  13. Kondratov, S., Al Khamadani, M. (2014). Model of continuous nitration of benzene in perfect mixing reactor. Eastern-European Journal Of Enterprise Technologies, 2(6(68)), 16-22. Available: http://journals.uran.ua/eejet/article/view/23334
  14. Zadeh, L. A. (1994, March 1). Fuzzy logic, neural networks, and soft computing. Communications of the ACM, Vol. 37, № 3, 77–84. doi:10.1145/175247.175255
  15. Ul’yanov, S., Litvintseva, L., Dobrynin, V., Mishin, A. (2011). An intelligent robust control: soft computing technologies. M.: PronetLabs, 406.
  16. Mishin, A., Dobrynin, V., Litvintseva, L. (2001). The soft computing technology of the designing of the intelligent control systems. Program products and systems, № 1, 13-16.
  17. Mikhalev, A., Vinokurova, E., Sotnik, S. (2011). Computer methods of intelligent data processing. Dnipropetrovsk: NMetAU, IK “System technologies”, 209.
  18. Averkin, A., Prokopchina, S. (1997). Soft computing and measurements, Intelligent systems, № 1-4, 94-113.
  19. Azvine, B., Azarmi, N., Nauck, D. D. (2000). Intelligent systems and soft computing: prospects, tools and applications. Springer, 369.
  20. Nikolaeva, A., Ul’yanov, S. (2013). An intelligent control of robot-manipulator on the base of soft computing. Program products and systems, № 4 (104), 157-162.

Downloads

Published

2015-01-29

How to Cite

Кондратов, С. А., & Аль Хамадани, Д. М. (2015). Defining and classification of the soft projects as a base for their scope planning. Technology Audit and Production Reserves, 1(4(21), 20–25. https://doi.org/10.15587/2312-8372.2015.38048

Issue

Vol. 1 No. 4(21) (2015): Technologies of food, light and chemical industry

Section

Technologies of food, light and chemical industry

License

Copyright (c) 2016 Сергей Алексеевич Кондратов, Джамал Мохаммед Аль Хамадани

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.