Using modern computer technology for automatization of production processes

Authors

  • Тетяна Василівна Бодненко Educational and Research Institute of Physics, Mathematics and Computer Information Systems, Cherkasy National University named after Bogdan Khmelnitsky, 79, Boulevard named after Taras Shevchenko, Cherkasy, Ukraine, 18031, Ukraine https://orcid.org/0000-0001-8201-9140

DOI:

https://doi.org/10.15587/2312-8372.2015.40869

Keywords:

modern computer technology, information technology, automation of production processes, computer systems automation

Abstract

Using of modern computer technology to automate production processes will increase productivity and significantly reduce production time product at work.

For optimal organization of production processes using computer technology needed them the right choice. It is caused by the specific activities of enterprises of different types of economic activity, ownership and diversity of the tasks of economic analysis, the solution of which is effectively the effective management of the enterprise in the market, which, in turn, are characterized by rapid change of environmental factors, uncertainty and risk. Because modern production - a complex, multi-faceted, multi-functional system, which is in the process of improvement and adaptation to external factors. To succeed output required to implement a strategic plan for industrial automation.

Nowadays there are many systems to automate production processes. In this regard, we choose a system for the enterprise: the class system, for example, ERP-systems can be installed in industrial enterprises and organizations in the service sector, for medium-sized businesses do not need a powerful functionality of these systems, so usually choose MRP II system; system manufacturer (western or domestic); someone who will carry out the introduction of (developer or consultant).

Between the preferred systems of automation of production processes identified: Sarah system (Computer Aided Process Planning), system of CAD (Computer Aided Design - design using computer programs), class CAE applications (numerical simulation of heat and mass transfer processes, physical and chemical reactions and metallurgical processes, analysis of electric fields), the system ERP (Enterprise Resource Planning - Enterprise Resource).

There are examples of application of T-FLEX CAD 3D.

These studies provide an opportunity to improve computer technology to automate production processes.

Author Biography

Тетяна Василівна Бодненко, Educational and Research Institute of Physics, Mathematics and Computer Information Systems, Cherkasy National University named after Bogdan Khmelnitsky, 79, Boulevard named after Taras Shevchenko, Cherkasy, Ukraine, 18031

Candidate of Pedagogical Sciences, Associate Professor

Department of Automation and Computer Integrated Technologies 

References

  1. Systemy avtomatychnoho proektuvannia SAPR. (2009). Available: http://joiner.org.ua/2rozrjad/2009-07-08-13-19-32/2009-07-24-08-10-10/2009-07-24-08-42-32.html
  2. Hladchuk, O. (2013). Innovatsiina ekonomika. Naukovo-vyrobnychyi zhurnal, 10 (48), 167-174.
  3. Taliupa, N. (2009). Suchasni pidkhody do udoskonalennia tekhnolohii upravlinnia. Investytsii: praktyka ta dosvid, 8, 49-50.
  4. Shapurov, O. (2008). Sutnist, rol i obiektyvna neobkhidnist udoskonalennia upravlinnia pidpryiemstvamy. Aktualni problemy ekonomiky, 8, 138-146.
  5. Yanenkova, I. H. (2014). Formuvannia promyslovykh ta innovatsiinykh klasteriv v Ukraini. Zbirnyk naukovykh prats Natsionalnoho universytetu korablebuduvannia, 1, 115-119. Available: http://nbuv.gov.ua/j-pdf/znpnuk_2014_1_21.pdf
  6. Davydov, I. Ye. (2008). Upravlinnia vytratamy. K.: Tsentr uchbovoi literatury, 320.
  7. Ivanilov, O. (2009). Ekonomika pidpryiemstva. K.: Tsentr uchbovoi literatury, 728.
  8. Boltak, O. L. Shliakhy vdoskonalennia systemy upravlinnia pidpryiemstvom. Vidkrytyi mizhnarodnyi universytet rozvytku liudyny «Ukraina». Available: http://nauka.zinet.info/9/boltak.php
  9. Avilov, A., Kaminskaia, Yu. O., Trusova, D. S. (2013). Primenenie komp'iuternyh sistem dlia avtomatizatsii i razrabotki novyh tehnologii v mashinostroitel'nom proizvodstve. Available: http://www.science-education.ru/pdf/2013/3/77.pdf
  10. Ladaniuk, A., Trehub, V., Kyshenko, V. (2000). Upravlenie tehnologicheskimi kompleksami v komp'iuterno-integrirovannyh sistemah. Problema upravlenyia y informatyky, 2, 72-79.
  11. Biblioteka ekonomista. (2005). Neoavstriiska shkola ekonomichnoho neoliberalizmu: pohliady L. fon Mizesa ta F. fon Khaiieka. Istoriia ekonomichnykh uchen. Available: http://library.if.ua/book/39/2903.html
  12. Vyrobnycha stratehiia. Available: http://pidruchniki.com/12090613/marketing/virobnicha_strategiya
  13. Kudriavtsev, Yu. (2008). Obzor algoritmov MOLAP. Available: http://citforum.ck.ua/consulting/BI/molap_overview/
  14. Rossolovskii, A. (2000). AutoCAD: Nastol'naia kniga pol'zovatelia. M.: Nolidzh, 928.
  15. Nezavisimyi ERP-portal «ERP-online». Available: http://www.erp-online.ru/
  16. T-FLEX CAD. Kratkii vvodnyi kurs. (2011). M.: AO «Top Sistemy», 283.

Downloads

Published

2015-04-02

How to Cite

Бодненко, Т. В. (2015). Using modern computer technology for automatization of production processes. Technology Audit and Production Reserves, 2(2(22), 43–49. https://doi.org/10.15587/2312-8372.2015.40869

Issue

Vol. 2 No. 2(22) (2015): Information technologies

Section

Information Technologies: Original Research

License

Copyright (c) 2016 Тетяна Василівна Бодненко

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.