Methods for determining the presence, character and value of wall effects in flow of polymer material
DOI:
https://doi.org/10.15587/2312-8372.2015.43845Keywords:
polymer, wall effects, wall slip, velocity on the wallAbstract
One of the features of shear flow of polymer material, which is usually neglected in simplified analysis, is the presence of wall effects of various kinds, which significantly affect the accuracy of the simulation. The most significant errors arise in the calculation of the flow in the channels at the current small sections of some polymers. Wall effects can greatly affect the distribution of the main parameters of the melt across section channels and, consequently, the quality characteristics, dimensional accuracy and necessity of tuning equipment.
The method of determining the presence of wall effects in the polymeric material and the nature of these effects, which allows, depending on the nature of wall effects, select the desired method for determining the magnitude of these effects.
The developed methods for determining the value of wall effects allow obtaining the velocity on the wall, depending on the shear stress under different characters of wall effects – slip along the wall and the formation of low-molecular wall layer. These data can be used to set the boundary conditions of slip on the wall in the numerical simulation of non-Newtonian properties of the material.References
- Ferrás, L. L., Nóbrega, J. M., Pinho, F. T. (2012, May). Analytical solutions for Newtonian and inelastic non-Newtonian flows with wall slip. Journal of Non-Newtonian Fluid Mechanics, Vol. 175-176, 76–88. doi:10.1016/j.jnnfm.2012.03.004
- Hatzikiriakos, S. G. (2012, April). Wall slip of molten polymers. Progress in Polymer Science, Vol. 37, № 4, 624–643. doi:10.1016/j.progpolymsci.2011.09.004
- Black, W. B. (2000). Wall slip and boundary effects in polymer shear flows. Wisconsin: University of Wisconsin – Madison, 125.
- Yarin, A. L., Graham, M. D. (1998). A model for slip at polymer/solid interfaces. Journal of Rheology, Vol. 42, № 6, 1491–1504. doi:10.1122/1.550898
- Sokolskyi, O. L., Sivetskyi, V. I., Mikulonok, I. O., Ivitskyi, I. I. (2014). Vyznachennia viazkosti prystinnoho sharu u formuiuchykh kanalakh obladnannia dlia pererobky polimeriv. Naukovi visti NTUU «KPI», 2, 66–69.
- Sokolskyi, O. L., Ivitskyi, I. I. (2014). Method of Accounting Wall Slip Polymer in Modeling Channel Processing Equipment. Modern Scientific Research and their Practical application, 10, 136–140.
- Ivitskyi, I. (2014). Polymer wall slip modelling. Technology Audit And Production Reserves, 5(3(19)), 8-11. doi:10.15587/2312-8372.2014.27927
- Zhdanov, Yu. A., Dubovitskyi, V. F. (1968). Issledovanie profilia skorostei pri techenii rasplava polimera v tsilindricheskih kanalah. Himicheskoe mashinostroenie, 8, 42–47.
- Morrison, F. A. (2001). Understanding Rheology. Oxford: Oxford University Press, 560.
- Rabek, Ya. (1983). Eksperimental'nye metody v himii polimerov. M.: Mir, 384.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2016 Володимир Іванович Сівецький, Олександр Леонідович Сокольський, Ігор Ігорович Івіцький
This work is licensed under a Creative Commons Attribution 4.0 International License.
The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.
