Development of methodology for energy assessment of operational modes of work of power equipment

Authors

DOI:

https://doi.org/10.15587/2312-8372.2015.44328

Keywords:

motor, losses, specific, load, temperature, optimum, energy-saving, slip, chart, resource

Abstract

Development of scientific and technical proposals in the field of energy conservation, and increase the operational reliability of electrical power is continued in the article. One of the main indicators for assessing technical solutions is, as you know, the annual economic benefit of the development, expressed in national currency. However, due to the instability of the national currency, such estimate can’t be objective. It is considered that the weakest element of the design of power equipment is its electrical insulation. The main negative impact on its operating parameter is the temperature of heating, which in turn is a function of electric power losses in it.

Evaluation of electric power losses in the power electrical equipment performed in units of electrical energy, and resource consumption of insulating structure – in units of insulation depreciation. As a result, it is difficult to assess the overall operational modes of electrical power equipment. Therefore, it is developed the technique of the energy assessment of operational modes of power equipment.

In this paper we addressed the scientific and technical problem of estimating the economy of resources in the electrical power equipment by one indicator for which it is conducted research of the loss of electricity, together with the process of thermal deterioration of its isolation, and then their joint assessment. This task is performed by the example of induction motor with squirrel-cage rotor as the most widespread object of the power equipment.

Author Biographies

Сергей Владимирович Овчаров, Tavria State Agrotechnological University, Khmelnitsky av., 18, Melitopol, Ukraine, 72312

Candidate of Technical Sciences, Associate Professor

Department of theoretical and general electrical engineering

Александр Андреевич Стребков, Tavria State Agrotechnological University, Khmelnitsky av., 18, Melitopol, Ukraine, 72312

Graduate student

Department of theoretical and general electrical engineering

References

  1. Ovcharov, V. V. (1990). Operational modes and continuous diagnostics of electrical machines in agricultural production. Kyiv: Publ. USH, 168.
  2. Ovcharov, S. V. Strebkov, A. A. (2015). Active energy losses research in an asynchronous electric motor in operating terms. Eastern-European Journal of Enterprise Technologies, 2(8(74)), 22-28. doi:10.15587/1729-4061.2015.39026
  3. Sun, D. S. (2012, January). Research on Voltage-Chopping and Energy-Saving Controlling Technology for Three-Phase AC Asynchronous Motor. Advanced Materials Research, 433-440, 1033–1037. doi:10.4028/www.scientific.net/amr.433-440.1033
  4. Hung, N. T., Thien, N. C., Nguyen, T. P., Le, V. S., Tuan, D. A. (2014). Optimization of Electric Energy in Three-Phase Induction Motor by Balancing of Torque and Flux Dependent Losses. Lecture Notes in Electrical Engineering, 497–507. doi:10.1007/978-3-642-41968-3_50
  5. Grouni, S., Ibtiouen, R., Kidouche, M., Touhami, O. (2010). Novel Loss Optimization in Induction Machines with Optimum Rotor Flux Control. International Journal of Systems Control, 1 (4), 163–169.
  6. Dhaoui, M., Sbita, L. (2010). A New Method for Losses Minimization in IFOC Induction Motor Drives. International Journal of Systems Control, 1 (2), 93–99.
  7. Alssa, K., Eddine, K. D. (2009). Vector Control Using Series Iron Loss Model of Induction Motors and Power Loss Minimization. World Academy of Science, Engineering and Technology, 52, 142–148.
  8. Kosmodamianskii, A. S., Vorob’ev, V. I., Pugachev, A. A. (2012, December). Induction motor drives with minimal power losses. Russian Electrical Engineering, 83 (12), 667–671. doi: 10.3103/s1068371212120073
  9. Yang, Y. (2010). Improvement of Electric Submersible Pump in High Temperature. China Science and Technology Fortune.
  10. Ostrovsky, A. (2012). Bazitratina method of determining the circuit parameters of the induction motor replacement. Proceedings of Tavria State Agrotechnological University, 12 (2), 66–72.

Downloads

Published

2015-05-28

How to Cite

Овчаров, С. В., & Стребков, А. А. (2015). Development of methodology for energy assessment of operational modes of work of power equipment. Technology Audit and Production Reserves, 3(1(23), 21–26. https://doi.org/10.15587/2312-8372.2015.44328

Issue

Vol. 3 No. 1(23) (2015): Energy, energy-saving technologies and equipment. Electrical engineering and industrial electronics

Section

Energy, energy-saving technologies and equipment

License

Copyright (c) 2016 Сергей Владимирович Овчаров, Александр Андреевич Стребков

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.