The influence of ortho-phosphoric acid and kaolin on the properties of unburnt refractory material
DOI:
https://doi.org/10.15587/2312-8372.2015.47001Keywords:
unburnt refractories, phosphate binder, kaolin, mullite-corundum products shardsAbstract
This thesis investigates the development of a composition of unburnt refractories based on shards of high-alumina refractory products and sintered corundum, kaolin and ortho-phosphoric acid. The experiment was carried out to determine physical and mechanical properties of the developed compositions. The analyzed results show that 7-9 % ortho-phosphoric acid content allows to receive the best properties specimen. It was also identified that the quantity of ortho-phosphoric acid influences the physical and mechanical properties of high-alumina samples both after heat treatment and after hard firing. In addition the experiment shows that the interaction of kaolin and ortho-phosphoric acid leads to the formation of combinations, which provide high mechanical strength to the obtained refractory material. The use of the ortho-phosphoric acid for such products manufacturing significantly simplifies the manufacturing technology of refractory materials, excludes their hard firing, cuts process losses and reduces finished material costs. The paper shows the perspective for production of the unburnt mullite-corundum refractories with improved operational properties based on the shards of mullite-corundum products, sintered corundum, kaolin as a clay bond and ortho-phosphoric acid as a phosphate binder.
References
- Hlystov, A. I., Bozhko, A. V., Sokolova, S. V., Riiazov, R. T. (2004). Poluchenie effektivnyh ogneupornyh futerovochnyh materialov na osnove othodov proizvodstva. Uspehi sovremennogo estestvoznaniia, 2, 131–133.
- Meier, A. (2004). Challenges for the Refractory Future. Pirker Bullettin, 2, 6–10.
- Pyrikov, A. N., Vil’danov, S. K., Likhodievskii, A. V. (2010, September). Certain aspects in the use of refractory materials and their waste products in industry. Refractories and Industrial Ceramics, Vol. 51, № 2, 126–128. doi:10.1007/s11148-010-9273-x
- Ochagov, I. G. (2005). Napravleniia razvitiia mirovoi ogneupornoi promyshlennosti. Novye ogneupory, 7, 71–74.
- Babkina, L. A., Soloshenko, L. N., Honchik, I. V. (2001). Vysokokachestvennye ogneupory dlia futerovki razlichnyh teplovyh agregatov. Vestnik NTU «KhPI», 19, 98–102.
- Kharybina, Yu. V. (2013). Bezobzhigovye ogneupory na fosfatnyh sviazkah. Mizh. nar. nauk-tekhn. konf. "Fizyko-khimichni problemy v tekhnolohii tuhoplavkykh nemetalevykh ta sylikatnykh materialiv", 8-9 zhovtnia 2013 r. Dnipropetrovsk: DVNZ «UDKhTU», 66.
- Kharybina, Yu. V., Pitak, Ya. N., Pitak, O. Ya. (2014). Bezobzhigovye mullitokorundovye ogneupory na fosfatnih sviazkah. Visnyk NTU «KhPI». Seriia: Novi rishennia v suchasnykh tekhnolohiiakh, 7 (1050), 141–146.
- Primachenko, V. V. Babkina, L. A., Honchik, I. V., Nikulina, L. N. (2010). Vliianie vida fosfatnogo sviazuiushchego na svoistva nabivnoi mullitokorundovoi massy. Zb. nauk. pr. VAT "UkrNDIVohnetryviv im. A. S. Berezhnoho", 110, 211–219.
- Sokolova, S. V. (2004). Vliianie strukturno-energeticheskih harakteristik gidrooksidov metallov na ih himicheskoe sviazyvanie s ortofosfornoi kislotoi s tsel'iu polucheniia fosfatnyh sviazuiushchih dlia zharostoikih betonov. Ogneupory i tehnicheskaia keramika, 9, 29–31.
- Hlystov, A. I., Sokolova, S. V., Vlasov, A. V. (2010). Povyshenie effektivnosti zharostoikih kompozitov za schet primeneniia himicheskih sviazuiushchih. Tehnologiia betonov, 9–10, 30–33.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2016 Юлія Вячеславівна Харибіна, Ярослав Миколайович Пітак
This work is licensed under a Creative Commons Attribution 4.0 International License.
The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.