Improving the quality control of building materials and products

Authors

  • Валентина Іванівна Логаніна Penza State University of Architecture and Construction 440028, Penza, st. G. Titov, 28, Ukraine
  • Володимир Григорович Камбург Penza State University of Architecture and Construction 440028, Penza, st. G. Titov, 28, Ukraine
  • Тетяна Володимирівна Учаева Penza State University of Architecture and Construction 440028, Penza, st. G. Titov, 28, Ukraine

DOI:

https://doi.org/10.15587/2312-8372.2012.4869

Keywords:

control, process capability, the lack of variations, the production of concrete.

Abstract

The article presents information on the use of process capability indices in the system of quality control at the enterprises of building industry. The results of calculating the reject rate of products at different values of centering the production process.

Author Biographies

Валентина Іванівна Логаніна, Penza State University of Architecture and Construction 440028, Penza, st. G. Titov, 28

Doctor of Technical Sciences, Professor, Head of Department

Department of standardization, certification and quality audit

Володимир Григорович Камбург, Penza State University of Architecture and Construction 440028, Penza, st. G. Titov, 28

Doctor of Technical Sciences, Professor, Head of Department

Department of Applied Mathematics and Computer Science

Тетяна Володимирівна Учаева, Penza State University of Architecture and Construction 440028, Penza, st. G. Titov, 28

Graduate student

References

  1. Логаніна В. І. До питання про систему контролю якості на підприємствах будіндустрії [Текст] / В. І. Логаніна, Т. В. Учаева // Регіональна архітектура і будівництво. — Пенза: ПГУАС, 2010. — № 1. — С. 31—36.
  2. Логаніна В. І. Сучасні інструменти управління якістю будівельних матеріалів та виробів [Текст] / В. І. Логаніна, Т. В. Учаева. — Пенза: ПГУАС, 2009. — С. 183.

Downloads

Published

2012-03-05

How to Cite

Логаніна, В. І., Камбург, В. Г., & Учаева, Т. В. (2012). Improving the quality control of building materials and products. Technology Audit and Production Reserves, 1(1(3), 13–16. https://doi.org/10.15587/2312-8372.2012.4869

Issue

Vol. 1 No. 1(3) (2012): Technology audit and production reserves

Section

Technology audit

License

Copyright (c) 2016 Валентина Іванівна Логаніна, Володимир Григорович Камбург, Тетяна Володимирівна Учаева

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.