Investigation of the time structure of output current of ACSC system signal transmission channel

Authors

DOI:

https://doi.org/10.15587/2312-8372.2015.52017

Keywords:

automatic cab signaling, rail line, shunt, signal impulse, parametrical chain

Abstract

The signal transmission channel is important component of systems of automatic cab signaling of continuous type (ACSC). The existing systems of ACSC have insufficiently high flow capacity and reliability of transmission of messages. Research of shunt current as carrier of alarm information allows establishing the reasons of decrease in reliability. In the existing works mathematical models of this current are constructed on the basis of number of the simplifying assumptions that limits their value for the solution of practical tasks. Objective of this research is creation of the specified model of shunt current considering its movement. The signal transmission channel is presented in the form of consecutive RL chain with variable parameters. The case of the shunt movement with constant speed is considered. It is shown that current satisfies to the linear uniform differential equation with variables in time in coefficients. The solution of this equation representing required model of current of the moving shunt is found. The model provides possibility of the correct analysis of influence of signal impulse front form on reliability of ACSC signal reception.

Author Biography

Василь Степанович Блиндюк, Ukrainian State University of Railway Transport, Feuerbach Square 7, Kharkiv, Ukraine, 61050

Doctor of Technical Sciences, Associate Professor

Department of electrical engineering and electrical machines

References

  1. Babaiev, M. M., Sotnyk, V. O. (2010). Analiz isnuiuchykh vitchyznianykh i zakordonnykh system ALS na zaliznychnomu transporti. Zbirnyk naukovykh prats UkrDAZT, 116, 120–127.
  2. Augutis, V., Gailius, D., Misevicius, R., Juraska, M. (2012, November 12). Measurements and Processing of Signals used in a Cab Signaling System. Electronics and Electrical Engineering, Vol. 18, № 9, 27–30. doi:10.5755/j01.eee.18.9.2800
  3. Leushin, V. B., Blachev, K. E., Yusupov, R. R. (2013). Analiz prichin sboev v sisteme ALSN. Avtomatika, sviaz', informatika, 4, 20–25.
  4. Ananieva, O. M., Sotnyk, V. O. (2011). Vplyv neodnorodnostei reikovoi linii na pryimannia syhnaliv ALSN. Zbirnyk naukovykh prats UkrDAZT, 124, 77–83.
  5. Ananieva, O. M., Davydenko, M. H., Sotnyk, V. O., Babaiev, M. M. (2011). Chasovi kharakterystyky strumu shunta ta elektrorushiinoi syly lokomotyvnykh kotushok systemy ALSM. Zbirnyk naukovykh prats UkrDAZT, 127, 56–78.
  6. Soboliev, Yu. V., Davydenko, M. H., Ananieva, O. M., Sotnyk, V. O. (2010). Matematychna model kanalu peredachi syhnaliv chyslovoho kodu ALSN. Zbirnyk naukovykh prats UkrDAZT, 119, 78–88.
  7. Ananieva, O. M., Sotnyk, V. O., Soboliev, Yu. V. (2011). Matematychna model vkhidnoho syhnalnoho strumu lokomotyvnoho pryimacha chyslovykh kodiv ALSN. Zbirnyk naukovykh prats DonIZT, 26, 67–70.
  8. Soboliev, Yu. V., Babaiev, M. M., Davydenko, M. H. (2002). Teoriia elektrychnykh i mahnitnykh kil. Kharkiv: KhFV «Transport Ukrainy», 264.
  9. Kamke, E. (1976). Spravochnik po obyknovennym differentsial'nym uravneniiam. Moscow: Nauka, 576.
  10. Prudnikov, A. P., Brychkov, Yu. A., Marichev, O. I. (1981). Integraly i riady. Elementarnye funktsii. Moscow: Nauka, 800.

Published

2015-09-22

How to Cite

Блиндюк, В. С. (2015). Investigation of the time structure of output current of ACSC system signal transmission channel. Technology Audit and Production Reserves, 5(1(25), 47–50. https://doi.org/10.15587/2312-8372.2015.52017

Issue

Section

Electrical Engineering and Industrial Electronics: Original Research