Finite element analysis of dynamic state metalworking technological system
DOI:
https://doi.org/10.15587/2312-8372.2016.71503Keywords:
finite element method, resonance frequency analysis, turning, vibrationsAbstract
Based on the analysis of the literature it was found that with cutting and turning speed increase during processing (spindle frequency) resonant phenomena that significantly affect the performance of cutting tools and quality (roughness) of finished surface can occur. The aim of the work is to determine the dynamic characteristics of metalworking system on the design phase that is without a full-scale experiment. This paper describes a stand based on constructed 3D model of modernized machine tool mod. 1700VF30 (spindle frequency 10000 rev/min) and the method and algorithm of development of finite-element model of dynamic state of designed 3D models of machine tool is proposed. With the help of developed model the modal analysis of the machine tool mod. 1700VF30 using the method of finite elements that can let to detect the resonant frequencies of oscillations within any range of the setting of the cutting was made. The finite element method using ANSYS executed a complex research of amplitude-frequency characteristics of constructed 3D model depending on the speed of the spindle rotation and frequency at which resonance phenomena occurs. Adequacy of the developed analytical model of dynamic state of the elements of a manufacturing system based on the upgraded machine tool 1700VF3 was proved experimentally. Results, received with its help differ from the experimental ones less than for 5 %.
References
- Mazur, M. P., Vnukov, Yu. M., Dobroskok, V. L., Zaloha, V. O., Novoselov, Yu. K., Yakubov, F. Ya.; In: Mazur, M. P. (2011). Osnovy teorii rizannia materialiv. Ed. 2. Lviv: Novyi Svit-2000, 422.
- Kudinov, V. A. (1967). Dinamika stankov. Moscow: Mashchinostroenie, 367.
- Zharkov, I. G. (1986). Vibratsii pri obrabotke lesviinym instrumentom. Leningrad: Mashchinostroenie, 184.
- Saloga, V. A., Shapoval, Ju. V. (2015). Vliianie chastoty vrasheniia shchpindelia na kachestvo obrabotannoi poverhnosti pri tochenii. Tezy dopovidei XV vseukrainskoi molodizhnoi naukovo-tekhnichnoi konferentsii «Mashynobuduvannia Ukrainy ochyma molodykh: prohresyvni idei – nauka – vyrobnytstvo», 04-07 lystopada 2015 r. Zhytomyr: ZhDTU, 30–31.
- Natarajan, C., Muthu, S., Karuppuswamy, P. (2011). Investigation of cutting parameters of surface roughness for a non-ferrous material using artificial neural network in CNC turning. Journal of Mechanical Engineering Research, Vol. 3, № 1, 1–14.
- Shunmugesh, K., Panneerselvam, K., Pramod, M., George Amal. (2014). Optimization of Turning Parameters with Carbide Tool for Surface Roughness Analysis. International Journal of Engineering Research & Technology, Vol. 3, № 6, 103–107.
- Syath Abuthakeer, S., Mohanram, P. V., Mohan Kumar, G. (2011). Dynamic and thermal analysis of high speed motorized spindle. International Journal of Applied Engineering Research, Vol. 1, № 4, 864–882.
- Ozlu, E., Budak, E. (2010). Analytical Prediction of Stability Limit in Turning Operations. Proceedings of the 9th Workshop on the Modelling of Machining Operations, 99–106.
- In: Kikonin, I. K. (1976). Tablitsy fisicheskih velichin. Moscow: Atomisdat, 1008.
- In: Naryshchkin, V. N., Korostashchevskii, R. V. (1984). Podshchipniki kacheniia. Moscow: Mashchinostroenie, 280.
- The Fundamentals of Modal Testing. (2000). Application Note 243-3. Agilent Technologies. Available: http://www.modalshop.com/techlibrary/Fundamentals%20of%20Modal%20Testing.pdf
- Zaloga, V. O., Nahornyi, V. V. (2014). Diahnostuvannia tekhnichnoho stanu metaloobrobnoho verstatu. Vysoki tekhnolohii v mashynobuduvanni, 1 (24), 71–79.
- Nahornyi, V. V. (2015). Kontrol' dinamicheskogo povedeniia metalloobrabatyvaiushih tehnologicheskih sistem i metod opredeleniia ih resursa. Sumy, 224.
- Liu, D., Zhang, H., Tao, Z., Su, Y. (2011, April 29). Finite Element Analysis of High-Speed Motorized Spindle Based on ANSYS. The Open Mechanical Engineering Journal, Vol. 5, № 1, 1–10. doi:10.2174/1874155x01105010001
- Zhang, S. (2012). Dynamic modeling of spindle vibration and surface generation in ultra-precision machining. The Hong Kong Polytechnic University, 254.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2016 Вільям Олександрович Залога, Юрій Володимирович Шаповал, Костянтин Андрійович Дрофа
![Creative Commons License](http://i.creativecommons.org/l/by/4.0/88x31.png)
This work is licensed under a Creative Commons Attribution 4.0 International License.
The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.