Покращення візуалізації ризиків підприємства: картування ризиків

Автор(и)

DOI:

https://doi.org/10.15587/2706-5448.2023.291959

Ключові слова:

картування ризиків, оцінка, вдосконалення, стале управління, охорона праці

Анотація

Об’єктом дослідження є ризики, які заважають виконанню місії будь-якого підприємства. Тому подолання цих ризиків є значним активом для організацій та загального здоров’я співробітників підприємства. Таким чином, комплексна робота з попередження організаційних ризиків дозволяє підприємству сформулювати стратегію, спрямовану на захист від усіх факторів ризику. Водночас він визначає сфери, де необхідно вжити більш цілеспрямованих дій, що потенційно призведе до позитивних змін у компанії. Щоб досягти цього та забезпечити надійну та тверду оцінку для кращого управління шкідливими елементами на підприємстві, було використано метод картування ризиків. Це інструмент візуалізації даних, спрямований на висвітлення вразливостей у різних процесах і діях, з якими стикається організація, навіть, дозволяючи приймати обґрунтовані рішення щодо запобігання ризикам і впоратися з ними. Картування ризиків визначається, як підхід до ідентифікації, оцінки, встановлення пріоритетів та управління ризиками, властивими діяльності підприємства. Він навіть заглиблюється в ретельне дослідження всіх управлінських, операційних і допоміжних процесів, діяльність яких потребує реалізації. Цей метод картографування базується на об’єктивному, структурованому та задокументованому описі існуючих ризиків. Оцінка дозволяє більш детально проаналізувати початкові та залишкові ризики на всіх рівнях підприємства, що сприяє розробці пріоритетного плану дій, що супроводжується аналізом його фінансування. Це зобов’язання є частиною підходу до постійного вдосконалення якості життя та умов праці, навіть залучення до процесу сталого управління. У якості прикладу було вирішено зосередитися на групі SAIDAL у Костянтині (Алжир). За допомогою цього прикладу прагнемо проілюструвати практичні наслідки та переваги використання картографування ризиків як стратегічного інструменту управління ризиками в складному організаційному контексті. Тепер наявність карти ризиків не тільки сприяє проактивному підходу до зменшення ризиків, але й сприяє досягненню ширших цілей постійного вдосконалення та стійких практик управління ризиками, що є необхідністю для будь-якого підприємства.

Біографії авторів

Aib Abdelatif, Mentouri Brothers University Constantine

PhD

Department of Transportation Engineering

Laboratory of Transports and Environment Engineering

 

Djamel Nettour, Higher National School of Engineering and Technology ENSTI

PhD

Department of Mining, Metallurgy and Materials Engineering

Rachid Chaib, Mentouri Brothers University Constantine

Professor

Department of Transportation Engineering

Laboratory of Transports and Environment Engineering

 

Ion Verzea, Gheorghe Asachi Technical University of Iasi

Professor

Salim Bensehamdi, Higher National School of Engineering and Technology ENSTI

Professor

Department of Mining, Metallurgy and Materials Engineering

Посилання

  1. Kharzi, R., Chaib, R., Akni, A. (2020). Prioritizing the actions to be undertaken in health and safety at work: case study region of Tiaret. International Journal of Law and Management, 62 (3), 267–275. doi: https://doi.org/10.1108/ijlma-01-2018-0009
  2. Kharzi, R., Chaib, R., Verzea, I., Akni, A. (2020). A Safe and Sustainable Development in a hygiene and healthy company using decision matrix risk assessment technique: a case study. Journal of Mining and Environment, 11 (2). doi: https://doi.org/10.22044/jme.2020.9156.1807
  3. Aven, T., Renn, O. (2018). Improving government policy on risk: Eight key principles. Reliability Engineering & System Safety, 176, 230–241. doi: https://doi.org/10.1016/j.ress.2018.04.018
  4. Manheim, D. (2020). The Fragile World Hypothesis: Complexity, Fragility, and Systemic Existential Risk. Futures, 122, 102570. doi: https://doi.org/10.1016/j.futures.2020.102570
  5. Heckmann, I., Comes, T., Nickel, S. (2015). A critical review on supply chain risk – Definition, measure and modeling. Omega, 52, 119–132. doi: https://doi.org/10.1016/j.omega.2014.10.004
  6. Abdi, M., Chaib, R., Verzea, I. (2020). Contribution to the occupational risk assessment for sustainable management in health and safety at work: case study. Acta Technica Napocensis Series: Applied Mathematics, Mechanics, and Engineering, 63 (4).
  7. Ekwere, N. (2016). Framework of effective risk management in small and medium enterprises (SMESs): a literature review. Bina Ekonomi, 20 (1), 23–46.
  8. Hafida, K., Rachid, C., Ahmed, B. (2017). Hazard identification and risk analysis for a reinforced concrete rolling mill. World Journal of Engineering, 14 (1), 1–6. doi: https://doi.org/10.1108/wje-11-2016-0123
  9. Saker, B., Chaib, R. (2022). Effective and Sustainable Management of Risk Disrupting the Supply Chain Activities: The Case of the ETRAG Company. International Journal of Performability Engineering, 18 (11), 770. doi: https://doi.org/10.23940/ijpe.22.11.p2.770780
  10. Reniers, G., Landucci, G., Khakzad, N. (2020). What safety models and principles can be adapted and used in security science? Journal of Loss Prevention in the Process Industries, 64, 104068. doi: https://doi.org/10.1016/j.jlp.2020.104068
  11. Komljenovic, D., Loiselle, G., Kumral, M. (2017). Organization: A new focus on mine safety improvement in a complex operational and business environment. International Journal of Mining Science and Technology, 27 (4), 617–625. doi: https://doi.org/10.1016/j.ijmst.2017.05.006
  12. Wachter, J. K., Yorio, P. L. (2014). A system of safety management practices and worker engagement for reducing and preventing accidents: An empirical and theoretical investigation. Accident Analysis & Prevention, 68, 117–130. doi: https://doi.org/10.1016/j.aap.2013.07.029
  13. Maamri, N., Chaib, R., Benidir, M., Verzea, I. (2021). Risk assessment using fuzzy ahp and fuzzy top-sis hybrid approach for safe and sustainable work, case study. Acta Technica Napocensis. Series: Applied Mathematics, Mechanics, and Engineering, 64 (1).
  14. Aouati, M. S., Chaib, R., Cozminca, I., Verzea, I. (2017). Map risks in the company: highlight at the top priority risks. World Journal of Engineering, 14 (6), 550–555. doi: https://doi.org/10.1108/wje-12-2016-0159
  15. Ramezani, J., Camarinha-Matos, L. M. (2020). Approaches for resilience and antifragility in collaborative business ecosystems. Technological Forecasting and Social Change, 151, 119846. doi: https://doi.org/10.1016/j.techfore.2019.119846
  16. Komendantova, N., Mrzyglocki, R., Mignan, A., Khazai, B., Wenzel, F., Patt, A., Fleming, K. (2014). Multi-hazard and multi-risk decision-support tools as a part of participatory risk governance: Feedback from civil protection stakeholders. International Journal of Disaster Risk Reduction, 8, 50–67. doi: https://doi.org/10.1016/j.ijdrr.2013.12.006
  17. Eppler, M. J., Platts, K. W. (2009). Visual strategizing: the systematic use of visualization in the strategic-planning process. Long Range Planning, 42 (1), 42–74. doi: https://doi.org/10.1016/j.lrp.2008.11.005
  18. Landoll, D. (2021). The security risk assessment handbook: A complete guide for performing security risk assessments. Boca Raton: CRC Press, 512. doi: https://doi.org/10.1201/9781003090441
  19. Kucuk Yilmaz, A. (2019). Strategic approach to managing human factors risk in aircraft maintenance organization: risk mapping. Aircraft Engineering and Aerospace Technology, 91 (4), 654–668. doi: https://doi.org/10.1108/aeat-06-2018-0160
  20. Arena, M., Arnaboldi, M., Palermo, T. (2017). The dynamics of (dis)integrated risk management: A comparative field study. Accounting, Organizations and Society, 62, 65–81. doi: https://doi.org/10.1016/j.aos.2017.08.006
  21. Wieczorek-Kosmala, M. (2014). Risk management practices from risk maturity models perspective. Journal of East European Management Studies, 19 (2), 133–159. doi: https://doi.org/10.5771/0949-6181-2014-2-133
  22. Krzemień, A., Suárez Sánchez, A., Riesgo Fernández, P., Zimmermann, K., González Coto, F. (2016). Towards sustainability in underground coal mine closure contexts: A methodology proposal for environmental risk management. Journal of Cleaner Production, 139, 1044–1056. doi: https://doi.org/10.1016/j.jclepro.2016.08.149
  23. Hafida, K., Ramdane, B., Rachid, C. (2022). Application of Continuous Improvement Tools to Welding Processes: Case of ENGTP. International Journal of Emerging Technology and Advanced Engineering, 12 (4), 199–209. doi: https://doi.org/10.46338/ijetae0422_24
  24. Ferreira de Araújo Lima, P., Crema, M., Verbano, C. (2020). Risk management in SMEs: A systematic literature review and future directions. European Management Journal, 38 (1), 78–94. doi: https://doi.org/10.1016/j.emj.2019.06.005
  25. McCrae, M., Balthazor, L. (2000). Integrating Risk Management into Corporate Governance: The Turnbull Guidance. Risk Management, 2 (3), 35–45. doi: https://doi.org/10.1057/palgrave.rm.8240057
  26. Taleb, M., Bouzerara, R., Chaib, R. (2022). Contribution to the Evaluation of the Influence of the Health Epidemic on the Quality of Life at Work (QWL): a Case Study. Polish Journal of Environmental Studies, 31 (6), 5229–5239. doi: https://doi.org/10.15244/pjoes/150018
  27. Bouzerara, R., Chaib, R., Verzea, I. (2022). Contribution to the analysis of the impact of hazardous chemicals on employee health case study: company SARL EL CHAFEK (Algeria). Ukrainian Journal of Ecology, 12 (1).
  28. Boulagouas, W., Chaib, R., Djebabra, M. (2021). Proposal of a temporality perspective for a successful organizational change project. International Journal of Workplace Health Management, 14 (5), 555–574. doi: https://doi.org/10.1108/ijwhm-05-2020-0083
  29. Jacobsson, A., Boldt, M., Carlsson, B. (2016). A risk analysis of a smart home automation system. Future Generation Computer Systems, 56, 719–733. doi: https://doi.org/10.1016/j.future.2015.09.003
  30. Saidal Group. Available at: https://www.saidalgroup.dz/
  31. Bouly, F., Burkhardt, H., Alemany, R., Yee-Rendon, B., Wollmann, D. (2014). Preliminary study of constraints, risks and failure scenarios for the High-Luminosity insertions at HL-LHC (No. CERN-ACC-2014-0135).
  32. Delmotte, S., Desroches, A. (2014). Quantitative Global Risk Analysis (GRAq). 19ième Congrès Lambda-Mu de l'Institut de la Maîtrise des Risques, IMDR. Dijon.
  33. Reddivari, S., Rad, S., Bhowmik, T., Cain, N., Niu, N. (2013). Visual requirements analytics: a framework and case study. Requirements Engineering, 19 (3), 257–279. doi: https://doi.org/10.1007/s00766-013-0194-3
  34. Tena-Chollet, F., Tixier, J., Dusserre, G., Mangin, J.-F. (2013). Development of a spatial risk assessment tool for the transportation of hydrocarbons: Methodology and implementation in a geographical information system. Environmental Modelling & Software, 46, 61–74. doi: https://doi.org/10.1016/j.envsoft.2013.02.010
Improvement of enterprise risk visualization: risk mapping

##submission.downloads##

Опубліковано

2023-12-04

Як цитувати

Abdelatif, A., Nettour, D., Chaib, R., Verzea, I., & Bensehamdi, S. (2023). Покращення візуалізації ризиків підприємства: картування ризиків. Technology Audit and Production Reserves, 6(2(74), 28–36. https://doi.org/10.15587/2706-5448.2023.291959

Номер

Розділ

Системи та процеси керування