Improving the efficiency of emission control dispersed particles from diesel exhaust gases
Keywords:
diesel engine, exhaust gases, disperse particles, working filters, accuracy of measuringAbstract
The estimation of methodical error of measuring of the mass of hinge-plate of diesel particulate matters is conducted. This error arises up by reason of influence on the result of measuring of parameters of process of stabilizing of working filters: temperatures of atmospheric air and duration of period of self-control of filters before weighing.
References
Environmental Protection Agency. CFR 40. Parts 92 and 92, 1997.: Emission Standards for Locomotives and Locomotive Engines // Federal Register. Vol. 62, № 28, – 240 р.
Environmental Protection Agency. CFR 40. Parts 85, 1980.: Standard for emission particu-late regulation for diesel-fueled light-duty vehicles and light-duty trucks // Federal Register. – Vol. 45, №45, 1980. - 325 р.
Environmental Protection Agency, CFR 40. Parts 89, 1981.: Control air pollution from new motor vehicles engines; particulate regulation for heavy-duty diesel engine // Ibid. – Vol. 46,– №4, 1981. – 206 р.
Regulation No 83. Revision 5, 2011.: Uni-form provision concerning the approval of vehicles with regard to the emission of pollutants according to engine fuel requirements. - The 05 series of amendments - United Nations Economic and Social Council Economic Commission for Europe Inland Transport Committee Working Party on the Construction of Vehicles. – E/ECE/TRANS/505. – 216 p.
Regulation No 49. Revision 5, 2011.: Uni-form provision concerning the approval of compression ignition (C.I.) and natural gas (NG) engines as well as positive-ignition (P.I.) engines fuelled with liquefied petroleum gas (LPG) and vehicles equipped with C.I. and NG engines and P.I. engines fuelled with LPG, with regard to the emissions of pollutants by the engine. - United Nations Economic and Social Council Economic Commission for Europe Inland Transport Committee Working Party on the Construction of Vehicles. – E/ECE/TRANS/505. – 194 p.
ISO 8178, 1996.: Reciprocating internal combustion engines – Exhaust emission measure-ment – Part 1: Test – bed measurement of gaseous and particulate exhaust emissions. – 94 p.
ISO 8178. 1996.: Reciprocating internal combustion engines – Exhaust emission measure-ment – Part 2: Test – Measurement of gaseous and particulate exhaust emissions at site. – 22 p.
ISO 8178. 1996.: Reciprocating internal combustion engines – Exhaust emission measure-ment – Part 4: Test cycles for different engine applications. – 18 p.
Dzetsina O., Gladushin V., 2010.: Method of diagnostics of locomotive diesel engines. Teka, Tom XА. Р. 91-97.
Nechaev G., Luchko M., 2010.: The posi-tion of diagnostics and motor-service in transport-logistic system of the Ukraine, Teka, Tom XА. Р. 65-71.
H. Nagano, 1990.: Measurement of Unreg-ulated Exhaust Emissions from Heavy Duty Diesel Engines with Mini-Dilution Tunnel. SAE Technical Paper Series 900643. - 10 p.
Nobuyoshi H., Izumi F., Taceshi S, 1989.: Measurement of diesel exhaust emissions with mini-dilution tunnel // SAE Techn. Pap. Ser. No 890181. – 12 p.
K. Engeljehringer, W. Schindler, 1993.: Meeting ISO 8178 Requirements for the Measure-ment of Diesel Particulates with Partial-Flow Dilu-tion Systems. SAE Technical Paper Series 932466. - 10 p.
K. Baumgard, J. Jonson. 1996.: The Ef-fect of Fuel and Engine Design on Diesel Ex-haust Particle Size Distribution. SAE Technical Paper Series 960131, – 16 p.
D. Kittelson, J. Jonson, 1991.: Variability in Particle
Emission Measurements in the Heavy Duty Transient Test. SAE Technical Paper Series 910738. – 28 p.
J. Johnson, S. Bagley, L. Gratz, D. Leddy, 1994.: A Review of Diesel Particulates Control Technology and Emissions Effects – 1992 Horning Memorial Award Lecture. SAE Technical Paper Series 940233. - 35 p.
P. Gomes, D. Yates, 1992.: The Influence of Some Engine Operating Parameters on Particu-late Emissions. SAE Technical Paper Series 922222. - 11 p.
Abbass M.H., Andrews G.E., Bartle K.D. and Williams D.T., 1989.: Diesel Particulate Com-position Changes along an Air Cooled Exhaust Pipe and Dilution Tunnel. SAE Technical Paper Series 890789. - 18p.
Burtscher H., 2001.: Literature Study on Tailpipe Particulate Emission Measurement for Diesel Engines // done for the Particle Measurement Programme (PMP) for BUWAL/GRPE . Fachhochschule Aargau, Univer-sity of Applied Science, Windisch, Switzerland. – 45 р.
Russel R., Graze Jr., 1993.: Development of a Miniaturized, Dilutien-Based Diesel Engine Particulate Sampling System for Gravimetric Measurement of Particulates. SAE Technical Paper Series 931190, - 12 p.
Engeljehringer K., Schindler W., 1993.: Meeting ISO 8178 Requirements for the Measure-ment of Diesel Particulates with Partial-Flow Dilu-tion Systems. SAE Technical Paper Series 932466, - 10 p.
Downloads
Issue
Section
License
Authors reserve the right of attribution for the submitted manuscript, while transferring to the Journal the right to publish the article under the Creative Commons Attribution License. This license allows free distribution of the published work under the condition of proper attribution of the original authors and the initial publication source (i.e. the Journal)Authors have the right to enter into separate agreements for additional non-exclusive distribution of the work in the form it was published in the Journal (such as publishing the article on the institutional website or as a part of a monograph), provided the original publication in this Journal is properly referenced
The Journal allows and encourages online publication of the manuscripts (such as on personal web pages), even when such a manuscript is still under editorial consideration, since it allows for a productive scientific discussion and better citation dynamics (see The Effect of Open Access).
