Major stress-strain state of double support multilayer beams under concentrated load. Part 1. Model construction

Authors

  • S. B. Kovalchuk Poltava State Agrarian Academy (1/3, Skovorody Str., Poltava, 36003, Ukraine), Ukraine
  • A. V. Gorik Poltava State Agrarian Academy (1/3, Skovorody Str., Poltava, 36003, Ukraine), Ukraine

Keywords:

multilayer beam, orthotropic layer, concentrated load, stresses, displacements

Abstract

The development of composite technologies contributes to their being widely introduced into the practice of designing modern different-purpose structures. Reliable prediction of the stress-strain state of composite elements is one of the conditions for creating reliable structures with optimal parameters. Analytical theories for determining the stress-strain state of multilayer rods (bars, beams) are significantly inferior in development to those for composite plates and shells, although their core structural elements are most common. The purpose of this paper is to design an analytical model for bending double support multilayer beams under concentrated load based on the previously obtained solution of the elasticity theory for a multi-layer cantilever. The first part of the article includes a statement of the problem, accepted prerequisites and main stages of constructing a model for bending a double-support multi-layer beam with a concentrated load (normal, tangential force and moment) and general-view supports in the extreme cross-sections. When building the model, the double support beam was divided across the loaded cross-section and presented in the form of two separate sections with equivalent loads on the ends. Using the general solution of the elasticity theory for a multilayer cantilever with a load on the ends, the main stress-strain state of the design sections was described without taking into account the local effects of changing the stress state near the concentrated load application points and supports. The obtained relations contain 12 unknown initial parameters. To determine them on the basis of the conditions of joint deformation (static and kinematic) of design sectors, a system of algebraic equations has been constructed. The constructed model allows one to determine the components of the main stress-strain state of double support beams each consisting of an arbitrary number of orthotropic layers, taking into account the amenability of their materials to lateral shear deformations and compression.

Author Biographies

S. B. Kovalchuk, Poltava State Agrarian Academy (1/3, Skovorody Str., Poltava, 36003, Ukraine)

Cand. Sc. (Engineering)

A. V. Gorik, Poltava State Agrarian Academy (1/3, Skovorody Str., Poltava, 36003, Ukraine)

D. Sc. (Engineering)

References

Altenbakh, Kh. (1998). Osnovnyye napravleniya teorii mnogosloynykh tonkostennykh konstruktsiy. Obzor [The main directions of the theory of multilayer thin-walled structures. Overview]. Mekhanika kompozit. materialov −Mechanics of Composite Materials, no. 3, pp. 333–348 [in Russian].

Ambartsumyan, S. A. (1987). Teoriya anizotropnykh plastin [Theory of anisotropic plates].Moscow: Nauka, 360 p. [in Russian].

Bolotin, V. V., & Novichkov, Yu. N. (1980). Mekhanika mnogosloynykh konstruktsiy [Mechanics of multilayer structures].Moscow: Mashinostroyeniye, 374 p. [in Russian].

Vasilyev, V. V. (1988). Mekhanika konstruktsiy iz kompozitsionnykh materialov [Mechanics of structures made of composite materials].Moscow: Mashinostroyeniye, 272 p. [in Russian].

Grigolyuk, E. I., & Selezov, I. T. (1972). Neklassicheskaya teoriya kolebaniy sterzhney, plastin i obolochek. Itogi nauki i tekhniki [Non-classical theory of oscillations of rods, plates and shells. Results of science and technology].Moscow: Nauka, vol. 5, 271 p. [in Russian].

Guz, A. N., Grigorenko, Ya. M., Vanin, G. A., & Babich, I. Yu. (1983). Mekhanika elementov konstruktsiy: V 3 t. T. 2: Mekhanika kompozitnykh materialov i elementov konstruktsiy [Mechanics of structural elements: In 3 vol. Vol. 2: Mechanics of composite materials and structural elements]. Kiyev: Naukova dumka, 484 p. [in Russian].

Malmeyster, A. K., Tamuzh, V. P., & Teters, G. A. (1980). Soprotivleniye polimernykh i kompozitnykh materialov [Resistance of polymeric and composite materials].Riga: Zinatne, 572 p. [in Russian].

Rasskazov, A. O., Sokolovskaya, I. I., & Shulga, N. A. (1987). Teoriya i raschet sloistykh ortotropnykh plastin i obolochek [Theory and calculation of layered orthotropic plates and shells]. Kiyev: Vyshcha shkola, 200 p. [in Russian].

Piskunov, V. G. (2003). Iteratsionnaya analiticheskaya teoriya v mekhanike sloistykh kompozitnykh sistem [Iterative analytical theory in mechanics of layered composite systems. Mechanics composite materials]. Mekhanika kompozit. materialov −Mechanics of Composite Materials, vol. 39, no. 1, pp. 2–24 [in Russian].

Horyk, O. V., Piskunov, V. H., & Cherednikov, V. М. (2008). Mekhanika deformuvannia kompozytnykh brusiv [Mechanics of deformation of composite beams].Poltava – Kyiv: АСМІ, 402 p. [in Ukrainian].

Goryk, A. V. Modeling Transverse Compression of Cylindrical Bodies in Bending (2001). Intern. Appl. Mech., vol. 37, iss. 9, pp. 1210–1221.

Goryk, A. V., & Koval’chuk, S. B. (2018). Elasticity theory solution of the problem on plane bending of a narrow layered cantilever bar by loads at its end. Mech. Composite Materials, vol. 54, iss. 2, pp. 179–190.

Goryk, A. V., & Koval’chuk, S.B. (2018). Solution of a Transverse Plane Bending Problem of a Laminated Cantilever Beam Under the Action of a NormalUniform Load. Strength of Materials, vol. 50, iss. 3, pp. 406–418.

Goldenveyzer, A. L. (1976). Teoriya uprugikh tonkikh obolochek [Theory of elastic thin shells]. Moscow: Nauka, 512 p. [in Russian].

Downloads

Published

2019-01-08

Issue

Vol. 21 No. 4 (2018)

Section

Dynamics and Strength of Machines

License

Copyright (c) 2019 S. B. Kovalchuk, A. V. Gorik

Creative Commons License

This work is licensed under a Creative Commons Attribution-NoDerivatives 4.0 International License.

All authors agree with the following conditions:

  • The authors reserve the right to claim authorship of their work and transfer to the journal the right of first publication of the work under the license agreement (the agreement).
  • Authors have a right to conclude independently additional agreement on non-exclusive spreading the work in the form in which it was published by the jpurnal (for example, to place the work in institution repository or to publish as a part of a monograph), providing a link to the first publication of the work in this journal.
  • Journal policy allows authors to place the manuscript in the Internet (for example, in the institution repository or on a personal web sites) both before its submission to the editorial board and during its editorial processing, as this ensures the productive scientific discussion and impact positively on the efficiency and dynamics of citation of published work (see The Effect of Open Access).