Formation of functional and technological properties of flour dough and quality of finished products in the technology of custard gingerbread with the use of «magnetofood» food additive

Authors

DOI:

https://doi.org/10.15587/2312-8372.2019.174588

Keywords:

«Magnetofood» dietary additive, custard gingerbread, rye-flour, rye-wheat dough, quality indicators

Abstract

The object of research is the technology of custard gingerbread from a mixture of rye and wheat flour using the food additive «Magnetofood». To improve the technology and to obtain high-quality products with a long term preservation of freshness, various technological methods are used, including the introduction of food additives that enhance complex action. Promising improvers of food systems (in particular, flour confectionery masses) are nano-additives that have a wide range of functional and technological properties, due to the specificity of their physico-chemical characteristics due to the nanoscale size and quantum mechanical effects. In order to study the influence of «Magnetofood» food additive on the functional, technological, physicochemical and structural-mechanical properties of flour, dough and quality indices of custard gingerbread, model dough of «Magnetofood» food additive was introduced into the prescription mixture in the form of a fat suspension in the «kneading the dough» stage. It is established that the introduction of the additive «Magnetofood» in the amount of 0.10 %; 0.15 %; 0.20 % by weight of the prescription mixture compared to the control in samples of rye-wheat flour:

– increases: water-binding ability – by (2±1) %; fat-holding capacity – by (8.8±0.8) %; swelling capacity – by (1.56±0.02) cm3/g; water absorption capacity – by (6.6±0.2) %; water retention capacity – by (15.0±0.9) %; dough stability – at (0.7±0.1)×60 s;

– reduces the time of formation of the dough by (1.6±0.2)×60 s and the degree of vacuum of the dough – by (23±2) units of the farinograph;

– in samples of gingerbread dough increases humidity by (1.3±0.2) %;

– reduces the dough density by (0.7±0.1) g/cm3;

– increases plastic viscosity by (2.2±0.4) kPa×s compared to control;

– in samples of finished products increases the output by (4.3±0.5) %, humidity by (2.4±0.1) %, and wetting by (20±2) %; improves fluidity on (0.5±0.2) points; reduces crumbling by (1.0±0.2) %.

Compared to similar well-known food system improvers, nanoobjects, which include nanopowder based on iron oxides Fe3O4 («Magnetofood»), exhibit antioxidant, bacteriostatic, sorption, emulsifying, structure-forming, moisture-and fat-retaining properties. This ensures the possibility of obtaining high values of the studied parameters.

Author Biography

Iryna Tsykhanovska, Ukrainian Engineering Pedagogics Academy, 16, Universitetska str., Kharkiv, Ukraine, 61003

PhD, Associate Professor

Department of Food and Chemical Technologies

References

  1. Panov, D. P. (2007). Obogaschenie produktov pitaniya massovogo potrebleniya. Pischevyie ingredientyi, syire i dobavki, 1, 30–31.
  2. Obzor ryinka hlebobulochnyih i konditerskih izdeliy Ukrainyi (2012). Hlebopekarskoe i konditerskoe delo, 3, 6.
  3. Renzyaeva, T. V., Tuboltseva, A. S., Ponkratova, E. K., Lugovaya, A. V., Kazantseva, A. V. (2014). Functional and technological properties of powdered raw materials and food additives for confectionary. Tehnika i tehnologiya pischevyih proizvodstv, 4, 43–49.
  4. Tsihanovska, I. V., Demidov, I. M., Barsova, Z. V., Pavlotska, L. F. (2015). Investigation of the oxidative and thermal transformations processes in the system «oil – lipids-magnetite suspension». Progresivna tehnika ta tehnologiyi harchovih virobnitstv restorannogo gospodarstva i torgivli, 1 (21), 353–362.
  5. Ilyuha, N. G., Barsova, Z. V., Kovalenko, V. A., Tsihanovskaya, I. V. (2010). Tehnologiya proizvodstva i pokazateli kachestva pischevoy dobavki na osnove magnetita. Eastern-European Journal of Enterprise Technologies, 6 (10 (48)), 32–35. Аvailable at: http://journals.uran.ua/eejet/article/view/5847
  6. Tsykhanovska, I., Evlash, V., Alexandrov, A., Lazarieva, T., Svidlo, K., Gontar, T. (2017). Design of technology for the rye-wheat bread “Kharkivski rodnichok” with the addition of polyfunctional food additive “Magnetofооd”. Eastern-European Journal of Enterprise Technologies, 6 (11 (90)), 48–58. doi: http://doi.org/10.15587/1729-4061.2017.117279
  7. Mingaleeva, Z., Starovoytova, O. et. al. (2007). Ispolzovanie antiokislitelnyih dobavok v proizvodstve muchnyih konditerskih izdeliy. Hleboproduktyi, 11, 52–53.
  8. Tamazova, S. U., Lisovoy, V. V., Pershakova, T. V., Kasimirova, M. A. (2016). Food supplements based on vegetable raw materials in the production of baked goods and pastries. Polythematic Online Scientific Journal of Kuban State Agrarian University, 122 (8), 1–8. doi: http://doi.org/10.21515/1990-4665-122-076
  9. Roslyakov, Yu. F., Vershinina, O. L., Gonchar, V. V. (2016). Scientific development for the baking and confectionery industry. Tehnologii pischevoy i pererabatyivayuschey promyishlennosti APK-produktyi zdorovogo pitaniya, 6, 1–6.
  10. Tsitrusovyie volokna Herbacel AQ Plus – tip N: spetsifikatsii dlya pischevyih dobavok i retsepturyi (2013). Available at: http://specin.ru/kletchatka/109.htm
  11. Gorshunova, K. D., Semenova, P. A., Bessonov, V. V. (2012). The interaction of hydrocolloids and water-soluble vitamins at designing of the enriched foodstuff. Food industry, 11, 46–49.
  12. Renzyaeva, T. V., Poznyakovskiy, V. M. (2009). Vodouderzhivayuschaya sposobnost syirya i pischevyih dobavok v proizvodstve muchnyih konditerskih izdeliy. Hranenie i pererabotka selhozsyirya, 8, 35–38.
  13. Buldakov, A. (2008). Pischevyie dobavki: Spravochnik. Moscow: SPb., 280.
  14. Martins, Z. E., Pinho, O., Ferreira, I. M. P. L. V. O. (2017). Food industry by-products used as functional ingredients of bakery products. Trends in Food Science & Technology, 67, 106–128. doi: http://doi.org/10.1016/j.tifs.2017.07.003
  15. Lai, W. T., Khong, N. M. H., Lim, S. S., Hee, Y. Y., Sim, B. I., Lau, K. Y., Lai, O. M. (2017). A review: Modified agricultural by-products for the development and fortification of food products and nutraceuticals. Trends in Food Science & Technology, 59, 148–160. doi: http://doi.org/10.1016/j.tifs.2016.11.014
  16. Dziki, D., Różyło, R., Gawlik-Dziki, U., Świeca, M. (2014). Current trends in the enhancement of antioxidant activity of wheat bread by the addition of plant materials rich in phenolic compounds. Trends in Food Science & Technology, 40 (1), 48–61. doi: http://doi.org/10.1016/j.tifs.2014.07.010
  17. Torres-León, C., Rojas, R., Contreras-Esquivel, J. C., Serna-Cock, L., Belmares-Cerda, R. E., Aguilar, C. N. (2016). Mango seed: Functional and nutritional properties. Trends in Food Science & Technology, 55, 109–117. doi: http://doi.org/10.1016/j.tifs.2016.06.009
  18. Bharath Kumar, S., Prabhasankar, P. (2014). Low glycemic index ingredients and modified starches in wheat based food processing: A review. Trends in Food Science & Technology, 35 (1), 32–41. doi: http://doi.org/10.1016/j.tifs.2013.10.007
  19. Ngemakwe, P. N., Le Roes-Hill, M., Jideani, V. (2014). Advances in gluten-free bread technology. Food Science and Technology International, 21 (4), 256–276. doi: http://doi.org/10.1177/1082013214531425
  20. Bird, L. G., Pilkington, C. L., Saputra, A., Serventi, L. (2017). Products of chickpea processing as texture improvers in gluten-free bread. Food Science and Technology International, 23 (8), 690–698. doi: http://doi.org/10.1177/1082013217717802
  21. García-Segovia, P., Pagán-Moreno, M. J., Lara, I. F., Martínez-Monzó, J. (2017). Effect of microalgae incorporation on physicochemical and textural properties in wheat bread formulation. Food Science and Technology International, 23 (5), 437–447. doi: http://doi.org/10.1177/1082013217700259
  22. Tsykhanovska, I., Evlash, V., Alexandrov, A., Lazarieva, T., Svidlo, K., Gontar, T. et. al. (2018). Substantiation of the mechanism of interaction between biopolymers of rye­and­wheat flour and the nanoparticles of the magnetofооd food additive in order to improve moisture­retaining capacity of dough. Eastern-European Journal of Enterprise Technologies, 2 (11 (92)), 70–80. doi: http://doi.org/10.15587/1729-4061.2018.126358
  23. Tsykhanovska, I., Evlash, V., Alexandrov, A., Lazareva, T., Svidlo, K., Gontar, T. et. al. (2018). Investigation of the moisture-retaining power of rye-wheat gluten and flour with polyfunctional food supplement “MagnetoFооd”. EUREKA: Life Sciences, 2, 67–76. doi: http://doi.org/10.21303/2504-5695.2018.00611
  24. Pavlov, A. V. (1998). Sbornik retseptur muchnyih konditerskih i bulochnyih izdeliy dlya predpriyatiy obschestvennogo pitaniya. Saint Petersburg: Gidrometeoizdat, 450.
  25. Royter, I. M., Demchuk, A. P., Drobot, V. I. (1977). Novyie metodyi kontrolya hlebopekarnogo proizvodstva. Kyiv: Tehnika, 191.
  26. Paschenko, L. P., Sanina, T. V., Stolyarova, L. I. et. al. (2007). Praktikum po tehnologii hleba, konditerskih i makaronnyih izdeliy (tehnologiya hlebobulochnyih izdeliy). Moscow: Kolos, 215.
  27. DSTU 4910:2008. Virobi konditerski. Metodi viznachennya masovih chastok vologi ta suhih rechovin. Vzamen GOST 5900-73; vved. 2009-01-01. Kyiv: Derzhspozhivstandart Ukrayini, 14.
  28. Pivovarov, P. P., Pogozhih, M. I., Polevich, V. V. et. al. (2006). Metodichniy posIbnik z reologIchnih metodiv doslidzhennya sirovini ta harchovih produktiv, avtomatizatsiya rozrahunkiv reologichnih harakteristik. Kharkiv: KhSUFT, 150.
  29. GOST 24901-2014. Pechene. Obschie tehnicheskie usloviya (2015). Moscow: Standartinform, 12.
  30. Hvostenko, E. V., Solodenko, G. S. (2013). Stabilizatsiya kachestva zavarnyih pryanikov iz bezamiloznoy muki v protsesse hraneniya. Problemy formuvannya zdorovoho sposobu zhyttya u molodi. Odesa: ONATH, 143–144.

Downloads

Published

2019-06-30

How to Cite

Tsykhanovska, I. (2019). Formation of functional and technological properties of flour dough and quality of finished products in the technology of custard gingerbread with the use of «magnetofood» food additive. Technology Audit and Production Reserves, 3(3(47), 26–32. https://doi.org/10.15587/2312-8372.2019.174588

Issue

Vol. 3 No. 3(47) (2019): Chemical engineering

Section

Food Production Technology: Original Research

License

Copyright (c) 2019 Iryna Tsykhanovska

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.