Improvement of the method of calculation of mechanical characteristics of a traction motor of direct current with combined excitation

Authors

DOI:

https://doi.org/10.15587/2312-8372.2018.141384

Keywords:

mechanical characteristics, traction drive, combined excitation, method of finite elements

Abstract

The object of the study is the process of appearing an electromagnetic moment in traction motors of combined excitation of a trolleybus at synchronous inclusion of both components of the excitation system. This process is formally presented as mechanical characteristics – dependence of an electromagnetic moment of the motor from excitation currents.

One of most problem points is to determine the influence of excitation currents of the series and separate winding on an electromagnetic moment of the motor as a continuous dependence that allows to create a system of managing the traction drive with DC-DC excitation transformer. Peculiarities of the motor magnetic system are also taken into account.

During the study there was used the method of finite elements in the flat-parallel target setting of calculating moments by the results of calculating the magnetic field with the further regression analysis of results of digital experiments using Chebyshev polynomials on the set of equidistant points. 

There was received the continuous dependence of an electromagnetic moment from excitation currents as a polynomial that can be used both at creating managing systems DC-DC by the excitation transformer and at modeling operation modes of the traction drive as a whole. It is connected with the fact that the offered polynomial type has a continuous type dependency and its derivatives at all possible values of currents at the drive work. According to the results of the regression analysis, the maximal deviation of calculated dependencies doesn’t exceed 0,052, and mean deviation is no more 0,041. It proves the adequacy of the received dependencies to the results of the digital experiment on determining an electromagnetic moment.

Due to it, there is provided the possibility of modeling operation modes of the traction drive based on the motor with combined excitation and DC-DC transformer. The managing system parameters, received by modeling results, allow to raise energetic characteristics of trolleybuses. Comparing with analogous known systems, it provides more rational use of electric energy on thrust of the rolling stock. 

Author Biography

Ivan Kostenko, O. M. Beketov National University of Urban Economy in Kharkiv, 17, Marshala Bazhanova str., Kharkiv, Ukraine, 61002

Assistant

Department of Electrical Transport

References

  1. Liubarskyi, B. H. (2014). Teoretychni osnovy dlia vyboru ta otsinky perspektyvnykh system elektromekhanichnoho peretvorennia enerhii elektrorukhomoho skladu. Kharkiv: Natsionalnyi tekhnichnyi universytet «Kharkivskyi politekhnichnyi instytut», 368.
  2. Pavlenko, T., Shavkun, V., Petrenko, A. (2017). Ways to improve operation reliability of traction electric motors of the rolling stock of electric transport. Eastern-European Journal of Enterprise Technologies, 5 (8 (89)), 22–30. doi: https://doi.org/10.15587/1729-4061.2017.112109
  3. Pan, L., Zhang, C. (2016). An Integrated Multifunctional Bidirectional AC/DC and DC/DC Converter for Electric Vehicles Applications. Energies, 9 (7), 493. doi: https://doi.org/10.3390/en9070493
  4. Brazis, V., Kroics, K., Grigans, L. (2014). Scientific Laboratory Platform for Testing the Electric Vehicle Equipped with DC Drive. Latvian Journal of Physics and Technical Sciences, 51 (5), 56–64. doi: https://doi.org/10.2478/lpts-2014-0030
  5. Kharchenko, V. F., Daleka, V. Kh., Andriychenko, V. P., Kostenko, I. O. (2010). Pat. No. 60109 UA. Sposib oslablennia polia tiahovoho elektrodvyhuna zmishanoho zbudzhennia. MPK (2006.01) N02R 7/06. No. u201013973; declareted: 23.11.2010; published: 10.06.2011, Bul. No. 11.
  6. Andriychenko, V. P., Zakurdai, S. O., Kostenko, I. O. (2014). Improvement of the method used for control of starting direkt-currentrailway motor. Eastern-European Journal of Enterprise Technologies, 1 (8 (67)), 32–35. doi: https://doi.org/10.15587/1729-4061.2014.20123
  7. Ravino, V. V., Sacukevich, V. N., Galyamov, P. M. (2007). Approksimaciya krivoy namagnichivaniya tyagovyh elektrodvigateley trolleybusov. Energetika. Izvestiya vysshih uchebnyh zavedeniy i energeticheskih ob'edineniy SNG, 1, 27–33.
  8. Lyubarskiy, B. G. (2000). Modelirovanie i razrabotka kombinirovannogo vozbuzhdeniya svarochnyh generatorov postoyannogo toka s cel'yu uluchsheniya ih tekhniko-ekonomicheskih pokazateley. Kharkiv, 170.
  9. Finite Element Method Magnetics: HomePage. Available at: http://www.femm.info/wiki/HomePage
  10. Meeker, D. (2016). Series-wound heteropolar inductor motor for automotive applications. 2016 IEEE Transportation Electrification Conference and Expo (ITEC). doi: https://doi.org/10.1109/itec.2016.7520203
  11. Ryabov, E. S. (2011). Bezreduktorniy tyagoviy privod na osnove reaktivnogo induktornogo dvigatelya s aksial'nym magnitnym potokom dlya skorostnogo elektropodvizhnogo sostava. Kharkiv, 162.
  12. Riabov, E. S., Liubarskyi, B. H., Yakunyn, D. Y., Ziuzyn, D. Yu. (2010). Modelyrovanye tiahovoho bezreduktornoho pryvoda na osnove ynduktornoho dvyhatelia s aksyalnym mahnytnym potokom. Visnyk Natsionalnoho tekhnichnoho universytetu "Kharkivskyi politekhnichnyi instytut", 57, 243–251.
  13. Lyubarskiy, B. G., Yakunin, D. I. (2011). Imitacionnoe modelirovanie mekhanizma naklona kuzova s lineynym elektromekhanicheskim preobrazovatelem. MATLAB: materialy V Mezhdunarodnoy nauchnoy konferencii. Kharkiv: BET, 425–436.

Downloads

Published

2018-04-24

How to Cite

Kostenko, I. (2018). Improvement of the method of calculation of mechanical characteristics of a traction motor of direct current with combined excitation. Technology Audit and Production Reserves, 4(1(42), 4–10. https://doi.org/10.15587/2312-8372.2018.141384

Issue

Vol. 4 No. 1(42) (2018): Industrial and Technology Systems

Section

Mechanical Engineering Technology: Original Research

License

Copyright (c) 2018 Ivan Kostenko

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.