Investigation of hydrocarbon solvents for the control of paraphyn-hydrate deposits in oil wells

Authors

DOI:

https://doi.org/10.15587/2706-5448.2020.217921

Keywords:

paraffin-hydrate deposits, hydrocarbon solvent, internal well equipment, chemical reagent, well cleaning interval.

Abstract

The object of research is hydrocarbon solvents for the elimination of paraffin-hydrate deposits. The chemical methods of control of paraffin-hydrate deposits, in particular, application of hydrocarbon solvents are considered in the article. Studies of the effect of various chemical reagents on the dissolution of hydrate formations using a laboratory installation at different thermo-baric regimes, closest to the real conditions of the pipe space of oil and gas wells: the temperature varied discretely from –10 to +40 °C and pressure from 0 to 10 MPa. To study the effect of hydrocarbon solvents on the process of removing hydrate formations, the most rational methods of regression analysis and mathematical planning of the experiment were used – simplex-grid planning. The G-criterion of plan optimality was used, which includes 22 experiments. The synthesis of the plan was implemented by numerical methods on a software-controlled device for information processing. The use of such methods makes it possible to reasonably organize experimental research, adjust the time, equipment, materials and perform the required number of experiments. The results of measurements are shown in the diagrams for each solvent separately. The obtained data allowed to a priori substantiate the choice of the optimal variant of application of chemical reagents for complete dissolution and removal of paraffin-hydrate formations from the surface of the internal well equipment. Analysis of the data shows that the solubility reagents butyl cellosolve and ethylacetat solvents, which can be recommended for wide application in the oil and gas industry, are characterized by the highest solubility and efficiency for removal of paraffin-hydrate deposits from the surface of well equipment. An important fact is that the consumption of the proposed solvents per оne well operation is not more than 4 m3, which is 2–3 times less than in other known analogues. The use of new solvents also allows to increase the inter-cleaning period of the well more than 2–3 times, which reduces the cost of extracted products.

Author Biography

Anna Liashenko, National University «Yuri Kondratyuk Poltava Polytechnic», 24, Pershotravnevyi ave., Poltava, Ukraine, 36011

Senior Lecturer

Department of Oil and Gas Engineering and Technology

References

  1. Akhfash, M., Aman, Z. M., Ahn, S. Y., Johns, M. L., May, E. F. (2016). Gas hydrate plug formation in partially-dispersed water–oil systems. Chemical Engineering Science, 140, 337–347. doi: http://doi.org/10.1016/j.ces.2015.09.032
  2. Ivanova, I. K., Koryakina, V. V., Semenov, М. Е. (2018). Investigation of the hydrate formation process in emulsions of asphaltene-resin-paraffin deposits by dsc method. Fundamental Research, 11, 143–149. doi: http://doi.org/10.17513/fr.42313
  3. Davies, S. R., Boxall, J. A., Koh, C., Sloan, E. D., Hemmingsen, P. V., Kinnari, K. J., Xu, Z.-G. (2009). Predicting Hydrate-Plug Formation in a Subsea Tieback. SPE Production & Operations, 24 (4), 573–578. doi: http://doi.org/10.2118/115763-pa
  4. Greaves, D., Boxall, J., Mulligan, J., Sloan, E. D., Koh, C. A. (2008). Hydrate formation from high water content-crude oil emulsions. Chemical Engineering Science, 63 (18), 4570–4579. doi: http://doi.org/10.1016/j.ces.2008.06.025
  5. Turner, D. J., Miller, K. T., Dendy Sloan, E. (2009). Methane hydrate formation and an inward growing shell model in water-in-oil dispersions. Chemical Engineering Science, 64 (18), 3996–4004. doi: http://doi.org/10.1016/j.ces.2009.05.051
  6. Tronov, V. P. (1970). Mekhanizm obrazovaniia smoloparofinovykh otlozhenii i borba s nimi. Moscow: Nedra, 200.
  7. Khoroshilov, V. A., Semin, V. I. (1990). Preduprezhdenie gidratoobrazovaniia pri dobyche nefti. Prirodnye i tekhnogennye gazovye gidraty. Moscow: Nedra, 220.
  8. Maganov, R., Vakhitov, G., Batalin, O. (2000). Optimalnaia tekhnologiia borby s gidratoparafinovymi otlozheniiami. Neft Rossii, 3, 96–99.
  9. Viatchinin, M. G., Pravednikov, N. K., Batalin, O. Iu. et. al. (1998). Usloviia i zony gidratoobrazovaniia v zatrubnom prostranstve neftianoi skvazhiny. Neftianoe khoziaistvo, 2, 56–57.
  10. Viatchinin, M. G., Pravednikov, N. K., Batalin, O. Iu. et. al. (2001). Zakonomernosti gidratoobrazovaniia v zatrubnom prostranstve neftianoi skvazhiny. Neftianoe khoziaistvo, 4, 54–57.
  11. Viatchinin, M. G., Batalin, O. Iu., Schepkina, N. E. (2000). Opredelenie rezhimov i zon gidratoobrazovaniia v neftianykh skvazhinakh. Neftianoe khoziaistvo, 7, 38–44.
  12. Kasatkin, O. G. (1974). K voprosu postroeniia G-optimalnykh planov na simplekse. Primenenie matematicheskikh metodov dlia issledovaniia mnogokomponentnykh sistem. Moscow, 64–69.
  13. Zedginidze, I. G. (1976). Planirovanie eksperimenta. Moscow: Nauka, 390.
  14. Svetlitskii, V. M., Demchenko, P. N., Zaritskii, B. V. (2002). Problemy uvelicheniia proizvoditelnosti skvazhin. Kyiv: Vid. Palivoda A. V., 228.

Published

2020-12-30

How to Cite

Liashenko, A. (2020). Investigation of hydrocarbon solvents for the control of paraphyn-hydrate deposits in oil wells. Technology Audit and Production Reserves, 6(1(56), 63–66. https://doi.org/10.15587/2706-5448.2020.217921

Issue

Section

Reports on research projects