Influence of the firing temperature on the dielectric properties of ceramics based on barium titanate
DOI:
https://doi.org/10.15587/2706-5448.2021.242865Keywords:
ceramic technology, semi-dry pressing, thermal sintering, dielectric constant, imaginary density, open porosityAbstract
The object of the research is the firing temperature of ceramic materials based on barium titanate. In laboratory conditions, barium titanate was synthesized from raw materials of barium carbonate and titanium dioxide using ceramic technology, taking into account the stoichiometric composition of the compound. In order to study the effect of the firing temperature on the properties of the ceramic material, three temperatures were selected: 1270, 1300, and 1350 °C. The physical properties of the samples (imaginary density, water absorption, open porosity) were determined by the method of hydrostatic weighing in water. The samples were saturated with water after their preliminary evacuation. The dielectric characteristics of the obtained materials were measured on an E7-8CLR automated device (Ukraine) at a frequency of 1 kHz. The structural and morphological features of ceramics based on synthesized barium titanate were investigated by direct scanning electron microscopy and X-ray phase analysis. On the basis of the complex of studies carried out, the technological parameters of the production of ceramics were selected. Thus, the duration of grinding at the first and second stages is 10 and 30 minutes; moisture content of the press powder – 8 %; pressing pressure – 20 MPa; temperature of the first firing – 1000 °С; temperature of the second firing – 1350 °C. The regularity of the change in the dielectric constant on the firing temperature of ceramics based on barium titanate was established. The investigated samples, obtained according to the given technological regime, are characterized by the following indicators: dielectric constant – 259.9; open porosity – 0.02 %; water absorption – 0.01 %; imaginary density – 5.45 g/cm3. The resulting material can be used to create composite ceramic materials that protect biological and technical objects from the effects of electromagnetic radiation, and can also be used to create new functional materials for space, aerospace, electronic engineering and medicine.
References
- Shevel', D. M. (2002). Elektromagnitnaya bezopasnost'. Kyiv: Vek+, NTI, 432.
- Davydov, B. I., Tikhonchuk, V. S., Antipov, V. V.; Grigor'yev, Yu. G. (Ed.) (1984). Biologicheskoye deystviye, normirovaniye i zashchita ot elektromagnitnykh izlucheniy. Moscow: Energoatomizdat, 176.
- Minin, B. A. (1974). SVCH i bezopasnost' cheloveka. Moscow: Sovetskoye radio, 352.
- Ivanov, V. H., Dziundziuk, B. V., Oleksandrov, Yu. M. (1994). Okhorona pratsi v elektroustanovkakh. Kyiv: AT Oko, 227.
- Nefedova, A. L., Sakhatskiy, V. D., Al'-Kheyari, A., Nefedov, L. I. (1999). Analiz metodov i sredstv zashchity ot elektromagnitnykh poley. Naukovyy visnyk budivnytstva, 8, 193–202.
- Krylov, V. A., Yuchenkova, T. V. (1972). Zashchita ot elektromagnitnykh izlucheniy. Moscow: Sovetskoye radio, 216.
- Lisachuk, G. V., Kryvobok, R. V., Lapuzina, O. M., Maystat, M. S., Kryvobok, N. A., Voloshuk, V. V., Gusarova, I. O. (2018). To the Problem of the Creation of High-Temperature Radio-Absorbing Composite Ceramic Materials. 2018 IEEE 8th International Conference Nanomaterials: Application & Properties (NAP). IEEE, 1–4. doi: https://doi.org/10.1109/nap.2018.8914804
- Balkevich, V. L. (1984). Tekhnicheskaya keramika. Moscow: Stroyizdat, 256.
- Acosta, M., Novak, N., Rojas, V., Patel, S., Vaish, R., Koruza, J., Rossetti, G. A., Jr., Rödel, J. (2017). BaTiO3-based piezoelectrics: Fundamentals, current status, and perspectives. Applied Physics Reviews, 4 (4), 041305. doi: https://doi.org/10.1063/1.4990046
- Hossain, Md. S., Das, S. K., Moniruzzaman, Md., Hakim, M. A., Basith, M. A. (2021). Frequency and temperature dependent electric polarization, relaxation, and transport properties of Mo and W doped BaTiO3. Results in Physics, 30, 104873. doi: https://doi.org/10.1016/j.rinp.2021.104873
- Puli, V. S., Li, P., Adireddy, S., Chrisey, D. B. (2015). Crystal structure, dielectric, ferroelectric and energy storage properties of La-doped BaTiO3 semiconducting ceramics. Journal of Advanced Dielectrics, 05 (03), 1550027. doi: https://doi.org/10.1142/s2010135x15500277
- Lisachuk, G. V., Ved, M. V., Krivobok, R. V., Zakharov, A. V., Voloshchuk, V. V., Maistat, M. S. (2020). Development technology of electrical conductance ceramics. Bulletin of the National Technical University «KhPI». Series: Innovation researches in students’ scientific work, 6 (1360), 12–16. Available at: http://idnrs.khpi.edu.ua/article/view/2220-4784.2020.06.02
- GOST 22372–77. Materialy dielektricheskiye. Metody opredeleniya dielektricheskoy pronitsayemosti i tangensa ugla dielektricheskikh poter' v diapazone chastot ot 100 do 5·106 Gts. (1977). Moscow: Izdatel'stvo standartov, 18.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2021 Georgiy Lisachuk, Ruslan Kryvobok, Artem Zakharov, Valentyna Voloshchuk, Mykyta Maistat, Dmytro Glinskyy, Bogdan Kolovorotnyу
This work is licensed under a Creative Commons Attribution 4.0 International License.
The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.
