Collision avoidance by constructing and using a passing area in on-board controller

Authors

DOI:

https://doi.org/10.15587/2706-5448.2023.274296

Keywords:

passing of ships, safety of shipping, optimization of control processes, automatic control module, simulation stand

Abstract

The object of research is the processes of automatic optimal passing of one's own ship with many dangerous targets, including maneuvering ones, by the method of constructing the area of permissible passing parameters in the on-board computer. According to the European Maritime Safety Agency (EMSA), the largest number of ship accidents in 2014–2019 occurred due to collision (32 %). On modern ships, for observation and passing with targets, ARPA (automatic radar plotting aid) is used, which allows to automate manual operations, and the built-in function «Playing the maneuver» provides the navigator with a convenient graphic interface for solving passing problems. At the same time, ARPA is an automated system that assumes the presence of an operator in the control circuit. The presence of a person in the control circuit is related to the «human factor», which is a prerequisite for the occurrence of various types of accidents, including ship collisions. The most effective means of reducing the influence of the «human factor» on control processes is the introduction of automatic control modules in automated systems. The paper develops a method for the passing module, which allows automatic and optimal passing with many targets, including maneuvering ones. The number of targets for passing is not limited by the method, but is limited only by the capabilities of the ARPA to track the targets. The obtained results are explained by the fact that at each step of the on-board computer, a region of permissible passing parameters is constructed for all purposes, passing parameters that optimize a given optimality criterion are selected from the constructed region, the selected parameters are used as software in the control law. The developed method can be used on ships, subject to integration into the existing automated system of an on-board computer with an open architecture, to increase the capabilities of automatic traffic control, in this case, the possibility of automatic optimal passing with many objectives, including maneuvering.

Author Biographies

Serhii Zinchenko, Kherson State Maritime Academy

Doctor of Technical Sciences, Associate Professor

Department of Ship Handling

Oleh Tovstokoryi, Kherson State Maritime Academy

PhD, Associate Professor, Deep Sea Captain

Department of Ship Handling

Oleksandr Sapronov, Kherson State Maritime Academy

Doctor of Technical Sciences, Professor

Department of Transport Technologies and Mechanical Engineering

Kostiantyn Tymofeiev, Kherson State Maritime Academy

PhD, Associate Professor

Department of Ship Electrical Equipment and Automatic Devices Operation

Andrii Petrovskyi, Kherson State Maritime Academy

PhD, Associate Professor

Department of Navigation

Artem Ivanov, Kherson State Maritime Academy

PhD, Acting Head of Department

Department of Ship Electrical Equipment and Automatic Devices Operation

References

  1. Bole, A., Wall, A., Norris, A. (2013). Radar and ARPA manual: Radar, AIS and Target Tracking for Marine Radar Users. Elsevir, 552. Available at: https://www.amazon.com/Radar-ARPA-Manual-Target-Tracking-ebook/dp/B00GY5XEYO#reader_B00GY5XEYO2
  2. Navi-Trainer Professional 5000 (version 5.35) (2014). Instructor's Guide, 507.
  3. Nosov, P. S., Popovych, I. S., Cherniavskyi, V. V., Zinchenko, S. M., Prokopchuk, Y. A., Makarchuk, D. V. (2020). Automated identification of an operator anticipation on marine transport. Radio Electronics, Computer Science, Control, 3, 158–172. doi: https://doi.org/10.15588/1607-3274-2020-3-15
  4. Zinchenko, S. M., Mateichuk, V. M., Nosov, P. S., Popovych, I. S., Appazov, E. S. (2020). Improving the accuracy of automatic control with mathematical meter model in on-board controller. Radio Electronics, Computer Science, Control, 4, 197–207. doi: https://doi.org/10.15588/1607-3274-2020-4-19
  5. Shen, H., Hashimoto, H., Matsuda, A., Taniguchi, Y., Terada, D., Guo, C. (2019). Automatic collision avoidance of multiple ships based on deep Q-learning. Applied Ocean Research, 86, 268–288. doi: https://doi.org/10.1016/j.apor.2019.02.020
  6. Li, Y., Guo, Z., Yang, J., Fang, H., Hu, Y. (2018). Prediction of ship collision risk based on CART. IET Intelligent Transport Systems, 12 (10), 1345–1350. doi: https://doi.org/10.1049/iet-its.2018.5281
  7. Park, J., Choi, J., Choi, H. (2019). COLREGS‐compliant path planning considering time‐varying trajectory uncertainty of autonomous surface vehicle. Electronics Letters, 55 (4), 222–224. doi: https://doi.org/10.1049/el.2018.6680
  8. Huang, Y., Chen, L., van Gelder, P. H. A. J. M. (2019). Generalized velocity obstacle algorithm for preventing ship collisions at sea. Ocean Engineering, 173, 142–156. doi: https://doi.org/10.1016/j.oceaneng.2018.12.053
  9. Johansen, T. A., Cristoforo, A., Perez, T. (2016). Ship Collision Avoidance Using Scenario-Based Model Predictive Control. IFAC. Available at: https://pdfs.semanticscholar.org/34a3/c1a0b699774fadab417ca2f5ef422edb1f0b.pdf
  10. Zinchenko, S., Mateichuk, V., Nosov, P., Popovych, I., Solovey, O., Mamenko, P., Grosheva, O. (2020). Use of Simulator Equipment for the Development and Testing of Vessel Control Systems. Electrical, Control and Communication Engineering, 16 (2), 58–64. doi: https://doi.org/10.2478/ecce-2020-0009
Collision avoidance by constructing and using a passing area in on-board controller

Downloads

Published

2023-02-24

How to Cite

Zinchenko, S., Tovstokoryi, O., Sapronov, O., Tymofeiev, K., Petrovskyi, A., & Ivanov, A. (2023). Collision avoidance by constructing and using a passing area in on-board controller. Technology Audit and Production Reserves, 1(2(69), 25–29. https://doi.org/10.15587/2706-5448.2023.274296

Issue

Section

Systems and Control Processes