Selection of location of fuel pressure sensors for registration of oscillatory process

Authors

DOI:

https://doi.org/10.15587/2312-8372.2015.52024

Keywords:

sensor, fuel system, nozzle, pressure, oscillogram, pressure oscillation, amplitude

Abstract

Due to the deterioration in the fuel quality, more drivers are turning to service centers for rehabilitation of the fuel system. It is necessary to develop a method of diagnosis of these systems, which allows for a minimum of material costs get the maximum amount of information about the tested system.

It was conducted a study on the selection of pressure sensors and their location on the fuel injection system of the vehicle for the diagnosis of the fuel equipment. It was conducted an experiment using two different types of sensors and two cars with different design of the fuel system. The pressure oscillograms were obtained simultaneously with the recorded signals of nozzle control, current strength at the nozzle and air flow. It was concluded that these sensors may be used to diagnose the gasoline systems with the fuel injection on the valve.

Author Biographies

Николай Петрович Булгаков, Kharkiv National Automobile and Highway University, Petrovskogo 25, Kharkiv, Ukraine, 61002

Candidate of Technical Science, Associate Professor

Department of technical maintenance and vehicle service

Евгений Юрьевич Зенкин, Kharkiv National Automobile and Highway University, Petrovskogo 25, Kharkiv, Ukraine, 61002

Candidate of Technical Science, Assistant

Department of technical maintenance and vehicle service

References

  1. Zenkin, E. Yu. (2009). Analiz tehnicheskogo sostoianiia toplivnoi apparatury na osnove kolebanii davleniia topliva v gidroakkumuliatore. Dvigateli vnutrennego sgoraniia, 1, 144–148.
  2. Translated from German: Ponkratov, N. (2005). Sistemy upravleniia benzinovymi dvigateliami Bosch. Uzly i agregaty. Moscow: OOO «Knizhnoe izdatel'stvo «Za ruliom», 432.
  3. Ahlin, K. (2000). Modeling of pressure waves in the Common Rail Diesel Injection System. Linkoping University, Sweden. Available: https://www.fs.isy.liu.se/en/Publications/MSc/00_EX_3081_KA.pdf
  4. Shaw, C. T. (1992). Using Computational Fluid Dynamics Prentice Hall. Washington, 315.
  5. Chen, G., Aggarwal, S. K. (1996, February 1). Unsteady Multiphase Intake Flow in a Port-injected Gasoline Engine. SAE Technical Paper Series. SAE International, 59–69. doi:10.4271/960074
  6. Bulhakov, M. P. (2014). Diahnostuvannia palyvnykh system z bezposerednim uporskuvanniam za kolyvanniamy tysku palyva u rampi. Visnyk NTU «KhPI», 9 (1052), 140–145.
  7. Hu, Q., Wu, S. F., Stottler, S., Raghupathi, R. (2001, August). Modelling of Dynamic Responses of an Automotive Fuel Rail System, Part I: Injector. Journal of Sound and Vibration, Vol. 245, № 5, 801–814. doi:10.1006/jsvi.2000.3605
  8. Koval'chuk, L. I., Gusev, G. A. (2011). Diagnostirovanie sistem toplivopodachi benzinovyh DVS po parametram volnovyh protsessov v toplivnoi rampe. Avtomobil'naia promyshlennost', 4, 25–26.
  9. Stiesch, G. (2003). Modeling Engine Spray and Combustion Processes. Berlin: Springer, 282. doi:10.1007/978-3-662-08790-9
  10. Fox, J. A. (1989). Transient Flow in Pipes, Open Channels and Sewers. Ellis Horwood Ltd, 284.

Downloads

Published

2015-09-22

How to Cite

Булгаков, Н. П., & Зенкин, Е. Ю. (2015). Selection of location of fuel pressure sensors for registration of oscillatory process. Technology Audit and Production Reserves, 5(1(25), 16–19. https://doi.org/10.15587/2312-8372.2015.52024

Issue

Vol. 5 No. 1(25) (2015): Mechanical engineering and machine building. Energy, energy-saving technologies and equipment

Section

Mechanical engineering and machine building

License

Copyright (c) 2016 Николай Петрович Булгаков, Евгений Юрьевич Зенкин

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.