Analysis of the electrically driven gas pumping units application advantages
DOI:
https://doi.org/10.15587/2312-8372.2016.66948Keywords:
gas turbine, electric motor, compressor, variable drive, operational, environmental and economic factorsAbstract
This article discusses the impact of operational, environmental and economic factors on the drive choice to equip the gas pumping units. The main aim of this study is to analyze the factors influencing the choice of drive type, show the advantages of EDGPU, to determine the necessary conditions for their application. Comparison of frequency-controlled, hydrodynamic and mechatronic electric driven units with turbine driven is done based on the indicators of availability and the ability to implement different load regimes, efficiency, technological readiness and service life of equipment, ease of placement and need for production areas, requirements to energy supply and quality of gas quality, impact on the environment. Analysis on the basis of economic criteria includes consideration of the required investment costs, operating costs, including the costs of maintenance and repairs, the life cycle cost. Research results can be used for design of new and modernization of existing compressor stations of main gas pipelines, as well as the choice of technological compressors in various industries.
References
- Tsiruleva, N. N., Riabyshev, A. A. (2010). Perspektivy primeneniia elektroprivodnyh GPA. Gazovaia promyshlennost', 10, 12–15.
- Kurtz, R., Frogge, R., Hinchliff, M., Lortie, G., Raymer, R., Redfield, J., Sites, A., Smith, R. (2009). Application guideline for electrical motor drive equipment for natural gas compressors. Southwest Research Institute, 79.
- Kostenko, D. A., Ivanov, V. B. (2008). Reguliruemye privody: vozmozhnosti, zatraty, effektivnost'. TEK, 4, 30–33.
- Konchakov, N., Richter, M., Sitas, V., Ivanov, V., Fedyukhin, A. (2013). Voith hydrodinamic couplings use for the speed control of a centrifugal compressors. Eastern-European Journal Of Enterprise Technologies, 3(7(63)), 4–8. Available: http://journals.uran.ua/eejet/article/view/14807
- Ishkov, A. G., Hvorov, G. A., Yumashev, M. V. (2010). Sovremennoe sostoianie i perspektivnoe razvitie napravlenii energosberezheniia v transporte gaza. Gazovaia promyshlennost', 9, 36–39.
- Ernstberger, A.; Voith Turbo. (2000). Speed Control of Turbocompressors. Reprint from VDI Report № 1425. Germany: K & E, 10.
- Onishchenko, G. B. (2014). Energoeffektivnost' elektroprivodnyh gazoperekachivaiushchih agregatov. Promyshlennaia energetika, 8, 23–29.
- Kriukov, O. V. (2010). Sravnitel'nyi analiz privodnoi tehniki gazoperekachivaiushchih agregatov. Privodnaia tehnika, 5, 20–27.
- Zhabin, V. M., Kosarev, D. V. (2007). Sravnitel'nyi analiz sposobov regulirovaniia rezhimov raboty tsentrobezhnyh nagnetatelei elektroprivodnyh GPA. Transport gaza, 7, 23–30.
- Ivanov, V., Richter, M., Sitas, V. (2012). On the question of the comparative effectiveness of vacuum tube and variable-frequency drives. Eastern-European Journal Of Enterprise Technologies, 3(10(57)), 32–35. Available: http://journals.uran.ua/eejet/article/view/4180
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2016 Вадим Борисович Иванов
This work is licensed under a Creative Commons Attribution 4.0 International License.
The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.