Interaction of surfactants with poloxamers 338 and its effect on some properties of cream base
DOI:
https://doi.org/10.15587/2519-4852.2021.249312Keywords:
poloxamer 338 (P338), surfactant, micelle, cream base, spin probe, rotational correlation time (τ), rheological parametersAbstract
The aim. Study of the interaction of surfactants with poloxamer 338 (P338) and the effect of P338 on the properties of cream bases.
Materials and methods. Solutions of the surfactants and P338 as well as cream bases were under study. The average hydrodynamic diameter (Dh) and zeta potential (ζ‑potential) were determined by the light scattering intensity and electrophoretic mobility of micelles. The electron paramagnetic resonance (EPR) spectra of spin probes in micelles, solvents and bases were obtained; the type of spectrum, isotropic constant (AN), rotational correlation times (τ) and anisotropy parameter (ε) were determined. Liquids and cream bases were studied by capillary and rotational viscometry; the flow behaviour and yield stress (t0), dynamic and apparent viscosity (η) as well as the hysteresis (thixotropic) area (AH) were determined. The microstructure of the bases was examined by optical microscopy. The strength of adhesion (Sm) was assessed by the pull-off test, and the absorption of water was studied by dialysis.
Results. Under the impact of P338 the hydrodynamic diameters of micelles formed by cationic, anionic and nonionic surfactants decreased as well as the absolute values of their ζ‑potential became lower, but the microviscosity of the micelle nuclei increased. There was also a change in the structure of the aggregates of surfactant with fatty alcohols; EPR spectra, which were superpositions characteristic for the lateral phase separation, converted into triplets that indicated the uniform distribution of lipophilic probes in the surfactant phase. When the content of P338 increased to 17 %, the rheological parameters of the bases increased drastically, the flow behaviour and the microstructure changed. The bases had the consistency of cream within temperature range from 25 °C to 70 °C and completely restored their apparent viscosity, which had decreased under shear stress. P338 enhances the adhesive properties of the bases. Due to their microstructure, cream bases have a lower ability to absorb water compared to a solution and gel containing 17 % and 20 % P338, respectively.
Conclusions. The structure of surfactant micelles and aggregates of surfactants with fatty alcohols changed under impact of P338 due to the interaction of surfactants with P338. As a result of this interaction, at a sufficiently high concentration of P338, the microstructure and flow behaviour of bases changed, their rheological parameters, which remain high at temperatures from 25 °C to 70 °C, increased significantly, and water absorption parameters decreased. The bases with P338 were more adhesive
References
- The European Pharmacopoeia (2019). European Directorate for the Quality of Medicines & HealthCare of the Council of Europe. Strasbourg, 5224.
- Sheskey, P. J., Hancock, B. C., Moss, G. P., Goldfarb, D. J. (Eds.) (2020). Handbook of Pharmaceutical Excipients,London: Pharm. Press, 1296.
- Derzhavnyi reiestr likarskykh zasobiv Ukrainy. Available at: http://www.drlz.kiev.ua/
- Gosudarstvenniy reestr lekarstvennykh sredstv (GRLS). Available at: http://grls.rosminzdrav.ru
- Liapunov, N. A., Bezuglaia, E. P., Fadeikina, A. G., Lysokobylka, A. A., Stolper, Iu. M. (1999). Sozdanie miagkikh lekarstvennykh sredstv na razlichnykh osnovakh. Soobschenie 1. Issledovanie reologicheskikh svoistv mazei na vodorastvorimykh osnovakh. Farmakom, 6, 10–16.
- Datsenko, B. M. (Ed.) (1995). Teoryia y praktyka mestnoho lechenyia hnoinikh ran. Kyiv: Zdorovia, 384.
- Da Silva, J. B., Cook, M. T., Bruschi, M. L. (2020). Thermoresponsive systems composed of poloxamer 407 and HPMC or NaCMC: mechanical, rheological and sol-gel transition analysis. Carbohydrate Polymers, 240. doi: http://doi.org/10.1016/j.carbpol.2020.116268
- De Souza Ferreira, S. B., Bruschi, M. L. (2021). Investigation of the physicochemical stability of emulgels composed of poloxamer 407 and different oil phases using the Quality by Design approach. Journal of Molecular Liquids, 332. doi: http://doi.org/10.1016/j.molliq.2021.115856
- Lyapunova, A. M., Bezugla, O. P., Lyapunov, O. M. (2017). The study of o/w emulsions using the rotating viscometer method and the method of spin probes. News of Pharmacy, 4 (92), 29–34. doi: http://doi.org/10.24959/nphj.17.2190
- Liapunov, M. O., Ivanov, L. V., Bezuhla, O. P., Zhdanov, R. I., Tsymbal, L. V. (1992). Doslidzhennia ahrehativ poverkhnevo-aktyvnykh rechovyn (PAR) metodom spinovykh zondiv. Farmatsevtychnyi zhurnal, 5-6, 40–45.
- Bodratti, A., Alexandridis, P. (2018). Formulation of Poloxamers for Drug Delivery. Journal of Functional Biomaterials, 9 (1), 11. doi: http://doi.org/10.3390/jfb9010011
- Fakhari, A., Corcoran, M., Schwarz, A. (2017). Thermogelling properties of purified poloxamer 407. Heliyon, 3 (8). doi: http://doi.org/10.1016/j.heliyon.2017.e00390
- Russo, E., Villa, C. (2019). Poloxamer Hydrogels for Biomedical Applications. Pharmaceutics, 11 (12), 671. doi: http://doi.org/10.3390/pharmaceutics11120671
- Abdeltawab, H., Svirskis, D., Sharma, M. (2020). Formulation strategies to modulate drug release from poloxamer based in situ gelling systems. Expert Opinion on Drug Delivery, 17 (4), 495–509. doi: http://doi.org/10.1080/17425247.2020.1731469
- Ci, L., Huang, Z., Liu, Y., Liu, Z., Wei, G., Lu, W. (2017). Amino-functionalized poloxamer 407 with both mucoadhesive and thermosensitive properties: preparation, characterization and application in a vaginal drug delivery system. Acta Pharmaceutica Sinica B, 7 (5), 593–602. doi: http://doi.org/10.1016/j.apsb.2017.03.002
- Francke, N. M., Bunjes, H. (2021). Drug localization and its effect on the physical stability of poloxamer 188-stabilized colloidal lipid emulsions. International Journal of Pharmaceutics, 599. doi: http://doi.org/10.1016/j.ijpharm.2021.120394
- Kumar, K., Dhawan, N., Sharma, H., Vaidya, S., Vaidya, B. (2013). Bioadhesive polymers: Novel tool for drug delivery. Artificial Cells, Nanomedicine, and Biotechnology, 42 (4), 274–283. doi: http://doi.org/10.3109/21691401.2013.815194
- Giuliano, E., Paolino, D., Fresta, M., Cosco, D. (2018). Mucosal Applications of Poloxamer 407-Based Hydrogels: An Overview. Pharmaceutics, 10 (3), 159. doi: http://doi.org/10.3390/pharmaceutics10030159
- Cook, M. T., Brown, M. B. (2018). Polymeric gels for intravaginal drug delivery. Journal of Controlled Release, 270, 145–157. doi: http://doi.org/10.1016/j.jconrel.2017.12.004
- Soliman, K. A., Ullah, K., Shah, A., Jones, D. S., Singh, T. R. R. (2019). Poloxamer-based in situ gelling thermoresponsive systems for ocular drug delivery applications. Drug Discovery Today, 24 (8), 1575–1586. doi: http://doi.org/10.1016/j.drudis.2019.05.036
- Ivanova, R., Alexandridis, P., Lindman, B. (2001). Interaction of poloxamer block copolymers with cosolvents and surfactants. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 183-185, 41–53. doi: http://doi.org/10.1016/s0927-7757(01)00538-6
- Alexandridis, P., Alan Hatton, T. (1995). Poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) block copolymer surfactants in aqueous solutions and at interfaces: thermodynamics, structure, dynamics, and modeling. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 96 (1-2), 1–46. doi: http://doi.org/10.1016/0927-7757(94)03028-x
- Ćirin, D., Krstonošić, V., Poša, M. (2017). Properties of poloxamer 407 and polysorbate mixed micelles: Influence of polysorbate hydrophobic chain. Journal of Industrial and Engineering Chemistry, 47, 194–201. doi: http://doi.org/10.1016/j.jiec.2016.11.032
- Kuznetsov, A. N. (1976). Metod spinovogo zonda (Osnovy i primenenie). Moscow: Nauka, 210.
- Likhtenshtein, G. I. (1974). Metod spinovykh zondov v molekuliarnoi biologii. Moscow: Nauka, 256.
- Maslii, Y., Ruban, O., Levachkova, Y., Gureyeva, S., Kolisnyk, T. (2020). Choice of mucosal adhesive in the composition of a new dental gel. Pharmakeftiki, 32 (I), 40–49.
- Derzhavna Farmakopeia Ukrainy. Vol. 1 (2015). Kharkiv: Derzhavne pidpryiemstvo «Ukrainskyi naukovyi farmakopeinyi tsentr yakosti likarskykh zasobiv», 1128.
- Bezuglaya, E., Ivashchenko, H., Lyapunov, N., Zinchenko, I., Liapunova, A., Stolper, Y. et. al. (2021). Study of factors affecting the in vitro release of diclofenac sodium from hypromelose-based gels. ScienceRise: Pharmaceutical Science, 5 (33), 12–31. doi: http://doi.org/10.15587/2519-4852.2021.243040
- Rusanov, A. I., Schekin, A. K. (2016). Mitselloobrazovanie v rastvorakh poverkhnostno-aktivnykh veschestv. Saint Petersburg: OOO «Izdatelstvo «Lan», 612.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2021 Елена Петровна Безуглая, Николай Александрович Ляпунов, Алексей Андреевич Лысокобылка, Алексей Николаевич Ляпунов, Владимир Кириллович Клочков, Анна Владимировна Григорова, Анна Николаевна Ляпунова
This work is licensed under a Creative Commons Attribution 4.0 International License.
Our journal abides by the Creative Commons CC BY copyright rights and permissions for open access journals.