Study of factors affecting the in vitro release of dexpanthenol from solutions and topical semi-solid preparations

Authors

DOI:

https://doi.org/10.15587/2519-4852.2023.279283

Keywords:

dexpanthenol (DР), liquid, gel, cream, in vitro release test (IVRT)

Abstract

The aim. To identify the factors influencing the in vitro release of dexpanthenol (DP) from solutions and semi-solid preparations.

Materials and methods. Dispersed systems containing 5.0 % DP were studied: solutions that were Newtonian liquids and semi-solid preparations (creams, gels and ointment) with non-Newtonian flow behaviour. Rheological studies were performed by rotational viscometry. In vitro release tests were performed using vertical diffusion cells. The content of DP in the receptor medium was determined by liquid chromatography.

Results. It has been shown that the greatest values of release parameters of DP were characteristic of its aqueous solution; they decreased when propylene glycol (PG), macrogol 400 (M400), and poloxamer 338 (P338) were added but remained at a high enough level. The inclusion of cationic surfactant and cetostearyl alcohol (CSA) (0.5 : 4.5 % m/m) into the Newtonian liquid led to the formation of disperse system with a plastic flow behaviour and to significant decrease in the DP release. In the case of a cream containing a non-ionic surfactant and CSA, the release parameters of DP were also at a low level. The release of DP from the w/o emulsion-based ointment was minimal. Compared to DP aqueous solution, the rate of DP release from a carbomer-based gel decreased by 2.8 times; when 20 % of a mixture of PG and M400 (10 : 10 % m/m) was added to such a gel, the rate of drug release decreased by another 1.5 times. The fastest and most complete release of DP was observed in the case of the P338-based disperse system, which transformed from a Newtonian liquid into a gel at 32 °C.

Conclusions. In vitro release of DP depended on the type of base; rapid and complete release of DP was characteristic of its aqueous solution, and minimal release was observed in the case of hydrophobic ointment. The use of CSA in combination with a surfactant or carbomer to create bases for semi-solid preparations with plastic flow behaviour was a considerable factor that significantly slowed down the release of DP from them. The greatest values of the release parameters of DP were observed in the case of a gel based on P338

Author Biographies

Elena Bezuglaya, State Scientific Institution «Institute for Single Crystals» of National Academy of Sciences of Ukraine

PhD, Senior Researcher, Head of Laboratory

Laboratory of Technology and Analysis of Medicinal Products

Anna Liapunova, State Scientific Institution «Institute for Single Crystals» of National Academy of Sciences of Ukraine

PhD, Senior Researcher

Laboratory of Technology and Analysis of Medicinal Products

Igor Zinchenko, State Scientific Institution «Institute for Single Crystals» of National Academy of Sciences of Ukraine

PhD, Junior Researcher

Laboratory of Technology and Analysis of Medicinal Products

Nikolay Lyapunov, State Scientific Institution «Institute for Single Crystals» of National Academy of Sciences of Ukraine

Doctor of Pharmaceutical Sciences, Professor, Leading Researcher

Laboratory of Technology and Analysis of Medicinal Products

References

  1. The European Pharmacopoeia, 11th Edition (2022). EDQM. Strasbourg: Council of Europe. Available at: http://pheur.edqm.eu/subhome/11-0
  2. Proksch, E., de Bony, R., Trapp, S., Boudon, S. (2017). Topical use of dexpanthenol: a 70th anniversary article. Journal of Dermatological Treatment, 28 (8), 766–773. doi: https://doi.org/10.1080/09546634.2017.1325310
  3. Buckingham, R. (Ed.) (2020). Martindale: The Complete Drug Reference. London: Pharmaceutical Press, 4912.
  4. Gorski, J., Proksch, E., Baron, J. M., Schmid, D., Zhang, L. (2020). Dexpanthenol in Wound Healing after Medical and Cosmetic Interventions (Postprocedure Wound Healing). Pharmaceuticals, 13 (7), 138. doi: https://doi.org/10.3390/ph13070138
  5. Cho, Y. S., Kim, H. O., Woo, S. M., Lee, D. H. (2022). Use of Dexpanthenol for Atopic Dermatitis – Benefits and Recommendations Based on Current Evidence. Journal of Clinical Medicine, 11 (14), 3943. doi: https://doi.org/10.3390/jcm11143943
  6. Klunk, C., Domingues, E., Wiss, K. (2014). An update on diaper dermatitis. Clinics in Dermatology, 32 (4), 477–487. doi: https://doi.org/10.1016/j.clindermatol.2014.02.003
  7. Oguz, A., Uslukaya, O., Alabalık, U., Turkoglu, A., Kapan, M., Bozdag, Z. (2015). Topical N-Acetylcysteine Improves Wound Healing Comparable to Dexpanthenol: An Experimental Study. International Surgery, 100 (4), 656–661. doi: https://doi.org/10.9738/intsurg-d-14-00227.1
  8. Laffleur, F., Pschick, S., Barthelmes, J., Hauptstein, S., Bernkop-Schnurch, A. (2018). Impact of Surfactants on Skin Penetration of Dexpanthenol. Current Drug Delivery, 15 (3), 351–356. doi: https://doi.org/10.2174/1567201814666170503142707
  9. Sipos, E., Szász, N., Vancea, S., Ciurba, A. (2015). Evaluation and Selection of Gel Base for the Formulation of Dexpanthenol Products. Tropical Journal of Pharmaceutical Research, 13 (12), 1987–1992. doi: https://doi.org/10.4314/tjpr.v13i12.5
  10. Ilić, T., Pantelić, I., Savić, S. (2021). The Implications of Regulatory Framework for Topical Semisolid Drug Products: From Critical Quality and Performance Attributes towards Establishing Bioequivalence. Pharmaceutics, 13 (5), 710. doi: https://doi.org/10.3390/pharmaceutics13050710
  11. Tiffner, K. I., Kanfer, I., Augustin, T., Raml, R., Raney, S. G., Sinner, F. (2018). A comprehensive approach to qualify and validate the essential parameters of an in vitro release test (IVRT) method for acyclovir cream, 5%. International Journal of Pharmaceutics, 535 (1-2), 217–227. doi: https://doi.org/10.1016/j.ijpharm.2017.09.049
  12. The United States Pharmacopoeia, 41 – NF 36 (2018). The United States Pharmacopoeial Convention. Rockville. Available at: https://www.worldcat.org/title/united-states-pharmacopeia-2018-usp-41-the-national-formulary-nf-36/oclc/1013752699
  13. Draft guideline on quality and equivalence of topical products (2018). CHMP/QWP/708282/2018. Available at: www.ema.europa.eu/en/quality-equivalence-topical-products
  14. Bezuglaya, E., Ivashchenko, H., Lyapunov, N., Zinchenko, I., Liapunova, A., Stolper, Y. et al. (2021). Study of factors affecting the in vitro release of diclofenac sodium from hypromelose-based gels. ScienceRise: Pharmaceutical Science, 5 (33), 12–31. doi: https://doi.org/10.15587/2519-4852.2021.243040
  15. Alkilani, A., McCrudden, M. T., Donnelly, R. (2015). Transdermal Drug Delivery: Innovative Pharmaceutical Developments Based on Disruption of the Barrier Properties of the Stratum Corneum. Pharmaceutics, 7 (4), 438–470. doi: https://doi.org/10.3390/pharmaceutics7040438
  16. Sheskey, P. J., Hancock, B. C., Moss, G. P., Goldfarb, D. J. (Eds.) (2020). Handbook of Pharmaceutical Excipients. London: Pharm. Press, 1296.
  17. Nonsterile Semisolid Dosage Forms Scale-Up and Postapproval Changes: Chemistry, Manufacturing, and Controls. Release Testing and In Vivo Bioequivalence Documentation (1997). Guidance for Industry. U.S. Department of Health and Human Services; Food and Drug Administration Center for Drug Evaluation and Research (CDER), 37.
  18. Derzhavna Farmakopeіa Ukraini. Vol. 1 (2015). Kharkiv: Derzhavne pidpryiemstvo «Ukrayinskyi naukovyi farmakopeinyi tsentr yakosti likarskikh zasobiv», 1128.
  19. Derzhavniy reestr likarskih zasobiv Ukrayini. Available at: http://www.drlz.kiev.ua/
  20. Carbopol® Ultrez 21 Polymer. Technical Data Sheet (TDS-297) (2002). Cleveland: Lubrizol, 4.
  21. Derzhavna Farmakopeіa Ukraini. Dopovnennia 4 (2020). Kharkiv: Derzhavne pidpryiemstvo «Ukrayinskyi naukovyi farmakopeinyi tsentr yakosti likarskikh zasobiv», 600.
  22. Lyapunov, N., Bezuglaya, E., Liapunova, A., Zinchenko, I., Liapunov, O., Lysokobylka, O., Stolper, Y. (2022). Effect of the composition of emulsifiers and the dispersion medium on the properties of bases for semi-solid preparations. ScienceRise: Pharmaceutical Science, 5 (39), 29–45. doi: https://doi.org/10.15587/2519-4852.2022.266001
  23. Liapunov, N. A., Ivanov, L. V., Bezuglaya, E. P., Zhdanov, R. I., Tsimbal, L. V. (1992). A study of aggregates of surface-active substances (SAS) using the spin probe method. Pharmaceutical Journal, 5-6, 40–45.
  24. Bezuglaya, E., Lyapunov, N., Chebanov, V., Liapunov, O. (2022). Study of the formation of micelles and their structure by the spin probe method. ScienceRise: Pharmaceutical Science, 4 (38), 4–18. doi: https://doi.org/10.15587/2519-4852.2022.263054
  25. Pleguezuelos-Villa, M., Merino-Sanjuán, M., Hernández, M. J., Nácher, A., Peris, D., Hidalgo, I. et al. (2019). Relationship between rheological properties, in vitro release and in vivo equivalency of topical formulations of diclofenac. International Journal of Pharmaceutics, 572, 118755. doi: https://doi.org/10.1016/j.ijpharm.2019.118755
  26. Raghavan, L., Brown, M., Michniak-Kohn, B., Sammeta, S.; Langley, N., Michniak-Kohn, B., Osborne, D. W. (Eds.) (2019). Quality Assesment of API in Topical Drug Products. The Role of Microstructure in Topical Drug Product Development. Vol. 36. Springer: Cham, 47–87.
Study of factors affecting the in vitro release of dexpanthenol from solutions and topical semi-solid preparations

Downloads

Published

2023-06-30

How to Cite

Bezuglaya, E., Liapunova, A., Zinchenko, I., & Lyapunov, N. (2023). Study of factors affecting the in vitro release of dexpanthenol from solutions and topical semi-solid preparations. ScienceRise: Pharmaceutical Science, (3(43), 4–15. https://doi.org/10.15587/2519-4852.2023.279283

Issue

Section

Pharmaceutical Science