IDENTIFY PROMISING AREAS OF DESIGN BEARING SYSTEMS IN CARGO RAILCAR

Authors

  • Олексій Вікторович Фомін Донецький інститут залізничного транспорту Української державної академії залізничного транспорту вул. Артема, 184, м. Донецьк, 83018, Ukraine

DOI:

https://doi.org/10.15587/1729-4061.2012.4056

Keywords:

car building, areas and aspects of design.

Abstract

In this article the perspective directions of the design of bearing systems (frame and body modules) in cargo car building and their features  are  presented.

Author Biography

Олексій Вікторович Фомін, Донецький інститут залізничного транспорту Української державної академії залізничного транспорту вул. Артема, 184, м. Донецьк, 83018

Кандидат технічних наук, доцент

Кафедра «Рухомий склад залізниць»

References

  1. Мороз В.І. Формалізоване описання конструкції залізничних вантажних вагонів / В.І. Мороз, О.В. Фомін // Зб.наук.праць 107. - Харків: УкрДАЗТ, 2009. - Вип. –С 173-179.
  2. Фомин, А.В. Формализация процедуры выявления и использования конструкционных резервов грузовых вагонов [Текст]/ А.В. Фомин // Научно-теоретический и практический журнал «Оралдың ғылым жаршысы» (Уральский научный вестник). – Республика Казахстан, г. Уральск, 2011 – Вып.№.9(36)2011.- С.79-82.
  3. Шадур Л.А. Вагоны/. Изд. 2-е, перераб. и доп. Под ред. Л.А. Шадура. М., «Транспорт», 1973. - 440 с.
  4. Горбенко А.П., Мартинов І.Е. Конструювання та розрахунок вагонів – Харків: УкрДАЗТ, 2007.-150с.
  5. Буравлева Н.Г. Анализ влияния ремонтных нагрузок на напряженное состояние кузовов грузовых вагонов: Автореф. дис. на соиск. уч. степ, к.т.н. — Брянск.: БГТУ, 2001.
  6. Винников Н.Т. Напряженное состояние кузова восьмиосного полувагона от воздействия накладной вибромашины: Автореф. дис. на соиск. уч. степ, к.т.н. -М.: МИИТ, 1985, 23 с.

Downloads

Published

2012-06-01

How to Cite

Фомін, О. В. (2012). IDENTIFY PROMISING AREAS OF DESIGN BEARING SYSTEMS IN CARGO RAILCAR. Eastern-European Journal of Enterprise Technologies, 3(7(57), 32–35. https://doi.org/10.15587/1729-4061.2012.4056

Issue

Vol. 3 No. 7(57) (2012): Applied mechanics

Section

Applied mechanics

License

Copyright (c) 2014 Олексій Вікторович Фомін

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.

A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.