Parametric control converters dc voltage inductive measuring element

Authors

  • Александр Владимирович Аниськов Криворожский технический университет ул. Димитрова, 101/84, г. Кривой Рог, Украина, 50086, Ukraine
  • Александр Александрович Харитонов Криворожский технический университет ул. Светлова, 3/1, г. Кривой Рог, Украина, 50000, Ukraine

DOI:

https://doi.org/10.15587/1729-4061.2011.1182

Keywords:

Parametric control, converter

Abstract

A method of parametric control converters dc voltage inductive measuring element. The functional diagram of the control system with combined parametric control

Author Biographies

Александр Владимирович Аниськов, Криворожский технический университет ул. Димитрова, 101/84, г. Кривой Рог, Украина, 50086

Аспирант

Кафедра электроснабжения и ресурсозбережения

Александр Александрович Харитонов, Криворожский технический университет ул. Светлова, 3/1, г. Кривой Рог, Украина, 50000

Старший преподаватель

Кафедра электроснабжения и ресурсозбережения

References

  1. Булатов, О.Г., Царенко А.Л. Тиристорно-конденсаторные преобразователи, М: Энергоатомиздат, 1982г.
  2. Ранькис, И.Я. Оптимизация параметров тирнсторных систем импульсного регулирования тягового электропривода / И.Я. Ранькис.- Рига.: Зинатке, 1985.-206 с.

Downloads

How to Cite

Аниськов, А. В., & Харитонов, А. А. (2011). Parametric control converters dc voltage inductive measuring element. Eastern-European Journal of Enterprise Technologies, 5(3(53), 4–6. https://doi.org/10.15587/1729-4061.2011.1182

Issue

Vol. 5 No. 3(53) (2011): Control systems

Section

Control systems

License

Copyright (c) 2014 Александр Владимирович Аниськов, Александр Александрович Харитонов

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.

A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.