Spatial mathematical model of process of braking the wheeled tractor Fendt 926 Vario
DOI:
https://doi.org/10.15587/1729-4061.2011.1210Keywords:
Mathematical model, braking, wheeled tractorAbstract
The spatial mathematical model of process of braking of the wheeled tractor Fendt 926 Vario is presented, which includes description of motion of unsprung and sprung the masses, model of co-operation of elastic wheels with an ground and allows to probe influence of various factors on the dynamics of process of braking of the wheeled tractorReferences
- Тракторы: Теория / [Гуськов В.В., Велев Н.Н., Атамнов Ю.Е. и др.]; под ред. В.В. Гришкевича. – М.: Машиностроение, 1988. – 376 с.
- Шепеленко, Г.Н. Основы теории самоходных машин [Текст] / Г.Н. Шепеленко. – Х.: Основа, 1993. – 216 с.
- Грибко, Г.П. Исследование динамики торможения тракторного поезда на базе колесного трактора класса 14 кН: автореф. дис. на соискание уч. степени канд. техн. наук: спец. 05.05.03 “Автомобили и тракторы” [Текст] / Г.П. Грибко. – Минск, 1977. – 19 с.
- Михайловский, Е. Теория трактора и автомобиля: учебн. [для студ. высш. учебн. зав.] / Е. Михайловский, В. Цимбалин. – М.: “Сельхозгиз”, 1960. – 336 с.
- Иванов, В.В. Основы теории автомобиля и трактора: учебн. [для студ. высш. учебн. зав.] / Иванов В.В., Иларионов В.А., Морин М.М. – М.: “Высшая школа”, 1970. – 224 с.
- Чудаков, Д.А. Основы теории и расчета трактора и автомобиля: учебн. [для студ. высш. учебн. зав.] / Д.А. Чудаков. – М.: “Колос”, 1972. – 384 с.
- Раймпель Й. Шасси автомобиля. Амортизаторы, шины и колеса / Й. Раймпель – М.: “Машиностроение”, 1986. – 320 с.
- Работа автомобильной шины [Текст] / Кнороз В.И., Кленников Е.В., Петров И.П. и др. // под ред. В.И. Кнороза. – М.: “Транспорт”, 1976. – 238 с.
Downloads
How to Cite
Issue
Section
License
Copyright (c) 2014 Анатолій Ігорович Бондаренко
This work is licensed under a Creative Commons Attribution 4.0 International License.
The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.
A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.