Multilayer winding rope to drum with method “Steps”

Authors

  • Наталья Николаевна Фидровская Украинская инженерно-педагогическая академия ул. Университетская 16 г. Харьков Украина, Ukraine
  • Иван Сергеевич Варченко Украинская инженерно-педагогическая академия ул. Университетская 16 г. Харьков Украина, Ukraine

DOI:

https://doi.org/10.15587/1729-4061.2011.1254

Keywords:

"Steps", the rope drum hoist rope

Abstract

Shows a new way of multi-layer spooling of rope on the drum by the stairs. Describes the benefits of the new method

Author Biographies

Наталья Николаевна Фидровская, Украинская инженерно-педагогическая академия ул. Университетская 16 г. Харьков Украина

Кандидат технических наук, доцент.

Кафедра металлорежущего оборудования и технических систем

Иван Сергеевич Варченко, Украинская инженерно-педагогическая академия ул. Университетская 16 г. Харьков Украина

Аспирант

References

  1. Александров М.П. Грузоподъемные машины.– М.: Изд-во МГТУ им.Н.Э. Баумана-Высшая школа, Москва 2000.– 552с.
  2. Алексеева Л.А. Теория и практика подъема [Текст] / Л.А. Алексеева, Ю.Р. Бредихин, Л.А. Волобуева // изд. «Наукова думка», Киев, 1975 – 352 с.
  3. Ковальський Б. С. Теория многослойной навивки каната [Текст] / Б. С. Ковальський // ДАН УССР .– 1950.– №74.– С. 429–432.

Downloads

How to Cite

Фидровская, Н. Н., & Варченко, И. С. (2011). Multilayer winding rope to drum with method “Steps”. Eastern-European Journal of Enterprise Technologies, 5(7(53), 7–10. https://doi.org/10.15587/1729-4061.2011.1254

Issue

Vol. 5 No. 7(53) (2011): Applied mechanics

Section

Applied mechanics

License

Copyright (c) 2014 Наталья Николаевна Фидровская, Иван Сергеевич Варченко

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.

A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.