Technical diagnostics of rolling stock bearings in urban electric transport

Authors

  • Денис Юрійович Зубенко Харківська національна академія міського господарства вул. Революції 12 м., Харків 61002, Ukraine

DOI:

https://doi.org/10.15587/1729-4061.2011.1430

Keywords:

Rolling bearings, vibration diagnostics

Abstract

The methods of monitoring and diagnosing of rolling bearings based on the measurement of vibration parameters have been discussed. The monitoring devices based on these methods have been described

Author Biography

Денис Юрійович Зубенко, Харківська національна академія міського господарства вул. Революції 12 м., Харків 61002

Кандидат технічних наук, доцент

Кафедра "Електротранспорту"

References

  1. Александров А.А. Вибрация и вибродиагностика судового оборудования / А.А. Александров – Л.: Судостроение, 1996. – 273с.
  2. Балицкий Ф.Я. Виброакустическая диагностика зарождающихся дефектов [Текст] / Ф.Я. Балицкий– М.: Наука, 1984. – 129с.
  3. Вибрация энергетических машин[Текст] / Н.В. Григорьева - Л.: Машиностроение, 1983.- 464с.
  4. Карасев В.А. Доводка эксплуатируемых машин: Вибродиагностические методы [Текст] / В.А. Карасев – М.: Машиностроение, 1986. – 192с.
  5. Каталог приборов для анализа звука, вибраций и обработки данных[Текст] : Каталог / Нэрум - Дания, фирма "Брюль и Къер", 1989-90 гг.
  6. Клюева В.В. Приборы и системы для измерения вибрации, шума и удара[Текст] / В.В. Клюева - М.: Машиностроение, 1978. - Кн.1. - 448с. - Кн.2 - 439с.
  7. Ширман А.Р. Практическая вибродиагностика и мониторинг состояния механического оборудования [Текст] / А.Р. Ширман - М.: Издательский центр "Академия", 1996. – 317с.

Downloads

How to Cite

Зубенко, Д. Ю. (2011). Technical diagnostics of rolling stock bearings in urban electric transport. Eastern-European Journal of Enterprise Technologies, 4(7(52), 6–9. https://doi.org/10.15587/1729-4061.2011.1430

Issue

Vol. 4 No. 7(52) (2011): Applied mechanics

Section

Applied mechanics

License

Copyright (c) 2014 Денис Юрійович Зубенко

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.

A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.