Modeling of the extrusion process in the forming tools for forming molded profile

Authors

  • Геннадій Михайлович Коваленко ТОВ НВП «ІНКОС» вул. Любецька, 33, м. Чернігів, Україна, 14000, Ukraine
  • Ксенія Геннадіївна Коваленко Чернігівський державний технологічний університет, Ukraine

DOI:

https://doi.org/10.15587/1729-4061.2011.1431

Keywords:

Мolding PVC items, extruder, profile die

Abstract

A model for the calculation of technological parameters of formation the products of complex cross-section of PVC are offered, by molding the channel into segments consistency of the section. The equations for calculating the modernization of the existing design are being composed

Author Biographies

Геннадій Михайлович Коваленко, ТОВ НВП «ІНКОС» вул. Любецька, 33, м. Чернігів, Україна, 14000

Кандидат технічних наук

Директор, ТОВ НВП «ІНКОС»

Ксенія Геннадіївна Коваленко, Чернігівський державний технологічний університет

Магістр

Кафедра машин та апаратів виробництв хімічних волокон і текстильної промисловості

References

  1. Бернхардт Э. Переработка термопластичных материалов [Текст] /
  2. Бернхардт Э. – М.: Химия, 1962. – 747 с.
  3. Оборудование для переработки пластмасс [Текст] / [под ред.
  4. В.К. Завгороднего]. – М.: Машиностроение, 1976. – 407 c.
  5. Торнер Р.В. Теоретические основы переработки полимеров [Текст] /
  6. Торнер Р.В. – М.: Химия, 1977. – 462 c.
  7. Тадмор З. Теоретические основы переработки полимеров [Текст] / Тадмор З., Гогос К. – М.: Химия, 1984. – 630 c.

Downloads

How to Cite

Коваленко, Г. М., & Коваленко, К. Г. (2011). Modeling of the extrusion process in the forming tools for forming molded profile. Eastern-European Journal of Enterprise Technologies, 4(7(52), 9–11. https://doi.org/10.15587/1729-4061.2011.1431

Issue

Vol. 4 No. 7(52) (2011): Applied mechanics

Section

Applied mechanics

License

Copyright (c) 2014 Геннадій Михайлович Коваленко, Ксенія Геннадіївна Коваленко

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.

A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.