Estimation of structure of hardened layer of blades of ploughshare

Authors

  • Владимир Васильевич Дудник Полтавская государственная аграрная академия ул. Сковороды, 1/3, г. Полтава, Украина, 36003, Ukraine

DOI:

https://doi.org/10.15587/1729-4061.2011.1585

Keywords:

Microhardness, metallographic investigations, vibration hardening, the structure, the blade ploughshare

Abstract

The questions of changing the structure of the material blade ploughshare handling its vibration hardening

Author Biography

Владимир Васильевич Дудник, Полтавская государственная аграрная академия ул. Сковороды, 1/3, г. Полтава, Украина, 36003

Ассистент, аспирант

References

  1. Постанова Кабінету Міністрів від 30 травня 2007 р. №785 “Про затвердження Державної програми реалізації технічної політики в агропромисловому комплексі на період до 2011 р.”.
  2. Проблеми реалізації технічної політики в агропромисловому комплексі / за ред. Я.К. Білоуса. – К.: ННУ “ІАЕ”, 2007. – 215 с.
  3. Беликов И.А. Повышение долговечности рабочих органов плуга керамическими материалами: Автореф. дис. канд. техн. наук / И.А Беликов. – М.: 2002. – 20с.
  4. Гончаренко В.В. Восстановление и упрочнение режущей кромки лемеха пайкой металлокерамических пластин / В.В. Гончаренко, А.В. Фебряков, Ю.А. Кузнецов, М.Г. Дегтярев // Механизация и электрификация сельского хозяйства. – 2006. - №11. – С. 21-22.
  5. Верхуша В. Не поспішайте вибраковувати леміш / В. Верхуша,
  6. О. Боятян // АПК. Наука, Техника, практика. - №9. – С. 19.

Downloads

How to Cite

Дудник, В. В. (2012). Estimation of structure of hardened layer of blades of ploughshare. Eastern-European Journal of Enterprise Technologies, 3(5(51), 20–23. https://doi.org/10.15587/1729-4061.2011.1585

Issue

Vol. 3 No. 5(51) (2011): The applied physics and materials technology

Section

Applied physics

License

Copyright (c) 2014 Владимир Васильевич Дудник

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.

A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.