Development the filler materials for welding of cast iron with nodular graphite

Authors

  • Микола Андрійович Калін Українська інженерно-педагогічна академія вул. Університетська 16, м. Харків, 61003, Ukraine
  • Ольга Ігорівна Бурцева Українська інженерно-педагогічна академія вул.. Університетська 16, м. Харків, 61003, Ukraine

DOI:

https://doi.org/10.15587/1729-4061.2011.1588

Keywords:

Repair, cast-iron, welding, rod, alloying

Abstract

Composition of the cast-iron cast small twig is developed for gas and arc-metal of the welding of durable cast-ironon the basis of прутков of brand And with addition of alloying elements, containing rare-earth metals and coniferous forest

Author Biographies

Микола Андрійович Калін, Українська інженерно-педагогічна академія вул. Університетська 16, м. Харків, 61003

Кандидат технічних наук, доцент

Кафедра інтегрованих технологій в машинобудуванні та зварювального виробництва

Ольга Ігорівна Бурцева, Українська інженерно-педагогічна академія вул.. Університетська 16, м. Харків, 61003

Студент

Кафедра інтегрованих технологій в машинобудуванні та зварювального виробництва

References

  1. Асиновская Г.А., Журавицкий Ю.И. Газовая сварка чугуна. Машиностоение. М., 1974. 49 с.
  2. Иванов Б.Г., Журавицкий Ю.И., Левченков В.И. Сварка и резка чугуна. М. Машиностроение, 1977. 208 с.
  3. Левченков В.И. Состояние и перспективы развития сварки чугуна (обзор). «Сварочное производство», 1988. №2 с 2-4.

Downloads

How to Cite

Калін, М. А., & Бурцева, О. І. (2012). Development the filler materials for welding of cast iron with nodular graphite. Eastern-European Journal of Enterprise Technologies, 3(5(51), 32–35. https://doi.org/10.15587/1729-4061.2011.1588

Issue

Vol. 3 No. 5(51) (2011): The applied physics and materials technology

Section

Applied physics

License

Copyright (c) 2014 Микола Андрійович Калін, Ольга Ігорівна Бурцева

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.

A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.