Definition of materials quality for production of containers and packaging fat-containing products

Authors

  • Лариса Александровна Яценко Харьковский национальный университет радиоэлектроники пр. Ленина, 14, г. Харьков, Украина, 61166, Ukraine
  • Анна Владимировна Миняйло Харьковский национальный университет радиоэлектроники пр. Ленина, 14, г. Харьков, Украина, 61166, Ukraine
  • Ольга Семеновна Ратинова Харьковский национальный университет радиоэлектроники пр. Ленина, 14, г. Харьков, Украина, 61166, Ukraine

DOI:

https://doi.org/10.15587/1729-4061.2011.1590

Keywords:

Bonding layers, laminates, packaging

Abstract

A general characteristic of laminated packaging material. Describes the basic mechanisms of the test, as well as the basic properties of the samples

Author Biographies

Лариса Александровна Яценко, Харьковский национальный университет радиоэлектроники пр. Ленина, 14, г. Харьков, Украина, 61166

Асистент

Кафедра инженерной и компьютерной графики

Анна Владимировна Миняйло, Харьковский национальный университет радиоэлектроники пр. Ленина, 14, г. Харьков, Украина, 61166

Студентка

Кафедра инженерной и компьютерной графики

Ольга Семеновна Ратинова, Харьковский национальный университет радиоэлектроники пр. Ленина, 14, г. Харьков, Украина, 61166

Студентка

Кафедра инженерной и компьютерной графики

References

  1. Сирохман І. В. Товарознавство пакувальних товарів і тари [Текст]: підручник 2-ге видання / І. В. Сирохман, В. М. Завгородня. — К.: Центр учбової літератури, 2009. — с. 616.
  2. Отраслевой портал Unipack.ru [Электронный ресурс] – Режим доступа: www/ URL: http://ref.unipack.ru/38/ – 05.05.2011 г. – Загл. с экрана.

Downloads

How to Cite

Яценко, Л. А., Миняйло, А. В., & Ратинова, О. С. (2012). Definition of materials quality for production of containers and packaging fat-containing products. Eastern-European Journal of Enterprise Technologies, 3(5(51), 44–45. https://doi.org/10.15587/1729-4061.2011.1590

Issue

Vol. 3 No. 5(51) (2011): The applied physics and materials technology

Section

Applied physics

License

Copyright (c) 2014 Лариса Александровна Яценко, Анна Владимировна Миняйло, Ольга Семеновна Ратинова

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.

A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.