Upgrade the heat generating unit to improve the efficiency of grain grinding

Authors

  • Андрій Анатолиевич Папченко Сумський державний університет вул. Римського-Корсакова, 2, м. Суми, 40007, Ukraine

DOI:

https://doi.org/10.15587/1729-4061.2011.1654

Keywords:

Heat-generating unit, hydraulic milling, hydraulic mill

Abstract

Suggest ways to modernize the flow of heat-generating units for preparation of forage in cattle in order to intensify the process of hydrodynamic refinement. Numerical simulation of the modernized flow path

Author Biography

Андрій Анатолиевич Папченко, Сумський державний університет вул. Римського-Корсакова, 2, м. Суми, 40007

Кандидат технічних наук, науковий співробітник

Кафедра прикладної гідроаеромеханіки

References

  1. Волков Н.И. Многофункциональный теплогенерирующий агрегат и его использование для приготовления кормовых смесей в сельскохозяйственных предприятиях [Текст] / Н.И. Волков, А.А.Папченко // Промислова гідравліка і пневматика. – Вінниця. –2004. – № 1 (3). – С. 99-102.
  2. Євтушенко А.О. Розробка багатофункціонального теплогенеруючого агрегату-гомогенізатора для приготування біологічних добавок [Текст] / А.О. Євтушенко, С.Ф. Ковальов, М.С. Овчаренко, А.А. Папченко // Вестник национального технического университета Украины «КПИ».– Киев. – 2007.– № 53 .– С. 76-82.
  3. Барам А.А. Расчет мощности аппаратов роторно-пульсационного типа [Текст] / А.А. Барам, П.П. Дерко, Б.А. Клоцунг // Химическое и нефтяное машиностроение. – 1978.– №4.– С. 5-6.
  4. Євтушенко А.О. Теплогенеруючі агрегати – подальші шляхи їх розвитку та удосконалення [Текст] / А.О. Євтушенко, С.Ф. Ковальов, А.А. Папченко // Международный научно-технический журнал "Проблемы машиностроения". – Харьков, – 2007.– № 10. – С. 48 – 52.

Downloads

How to Cite

Папченко, А. А. (2012). Upgrade the heat generating unit to improve the efficiency of grain grinding. Eastern-European Journal of Enterprise Technologies, 3(8(51), 29–32. https://doi.org/10.15587/1729-4061.2011.1654

Issue

Vol. 3 No. 8(51) (2011): Energy saving technologies and equipment

Section

Energy-saving technologies and equipment

License

Copyright (c) 2014 Андрій Анатолиевич Папченко

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.

A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.