Сontact pressure determiantion in radial two-row bearings with barrel-like rollers

Authors

  • Александр Вячеславович Чернишенко Украинская инженерно-педагогическая академия ул. Университетская, 16, г. Харьков, 61003, Ukraine
  • Геннадий Иванович Фесенко Украинская инженерно-педагогическая академия ул. Университетская, 16, г. Харьков, 61003, Ukraine
  • Александр Анатольевич Мельниченко Украинская инженерно-педагогическая академия ул. Университетская, 16, г. Харьков, 61003, Ukraine

DOI:

https://doi.org/10.15587/1729-4061.2011.1816

Keywords:

Вearing, barrel rolls, the contact patch

Abstract

The questions related to the calculation of contact stress in two-row radial bearings with a barrel-shaped rollers. Obtained in the study method gives more accurate results, by definition, time-mers of the contact between the rings and rolling elements in bearings

Author Biographies

Александр Вячеславович Чернишенко, Украинская инженерно-педагогическая академия ул. Университетская, 16, г. Харьков, 61003

Старший преподаватель

Кафедра металлорежущего оборудования и транспортных систем

Геннадий Иванович Фесенко, Украинская инженерно-педагогическая академия ул. Университетская, 16, г. Харьков, 61003

Старший преподаватель

Кафедра металлорежущего оборудования и транспортных систем

Александр Анатольевич Мельниченко, Украинская инженерно-педагогическая академия ул. Университетская, 16, г. Харьков, 61003

Доктор технических наук, профессор

Кафедра металлорежущего оборудования и транспортных систем

References

  1. Ковальский Б.С. Расчеты деталей на местное сжатие [Текст] / Б.С. Ко-вальский. - Х.: «ХВКИУ», 1967. – 220с.
  2. Пинегин С.В. Контактная прочность и сопротивление качению [Текст] / С.В. Пинегин. – М.: «Машиностроение», 1969. – 244с.
  3. Безельман Р.Д. «Подшипники качения» Справочник. [Текст] / Б.В. Цыпкин, Л.Я.Перель. - М.: «Машиностроение», 1967. – 575с.

Downloads

How to Cite

Чернишенко, А. В., Фесенко, Г. И., & Мельниченко, А. А. (2012). Сontact pressure determiantion in radial two-row bearings with barrel-like rollers. Eastern-European Journal of Enterprise Technologies, 2(7(50), 4–8. https://doi.org/10.15587/1729-4061.2011.1816

Issue

Vol. 2 No. 7(50) (2011): Applied mechanics

Section

Applied mechanics

License

Copyright (c) 2014 Александр Вячеславович Чернишенко, Геннадий Иванович Фесенко, Александр Анатольевич Мельниченко

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.

A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.