To the question of breakdown of transfer relations of onboard planetary gear boxes of tracklaying vehicles

Authors

  • Дмитрий Олегович Волонцевич Национальный технический университет "Харьковский политехнический институт" ул. Фрунзе, 21, г. Харьков, Украина, 61002, Ukraine
  • Евгений Александрович Веретенников Национальный технический университет "Харьковский политехнический институт" ул. Фрунзе, 21, г. Харьков, Украина, 61002, Ukraine

DOI:

https://doi.org/10.15587/1729-4061.2011.1820

Keywords:

Тracked vehicles, to-side planetary gear boxes

Abstract

The article proposed a method of selection of gear ratios to-side planetary gear timid, which allows you to bring a fixed radius of rotation to critically for soils with good traction

Author Biographies

Дмитрий Олегович Волонцевич, Национальный технический университет "Харьковский политехнический институт" ул. Фрунзе, 21, г. Харьков, Украина, 61002

Доктор технических наук, доцент, заведующий кафедрой

Кафедра колесных и гусеничных машин им. А.А. Морозова

Евгений Александрович Веретенников, Национальный технический университет "Харьковский политехнический институт" ул. Фрунзе, 21, г. Харьков, Украина, 61002

Аспирант

Кафедра колесных и гусеничных машин им. А.А. Морозова

References

  1. Забавников Н.А. Основы теории транспортных гусеничных машин [Текст] / Н.А.Забавников. – М.: Машиностроение, 1975. – 448с.
  2. Гуськов В.В. Теория поворота гусеничных машин [Текст] / А.Ф. Опейко. – М.: Машиностроение, 1984. – 168с.
  3. Кондаков С.В. Повышение подвижности быстроходной гусеничной машины путем автоматизации системы управления криволинейным движени-ем [Текст] : автореферат. / С.В. Кондаков. – М., 2009. – 34с.

Downloads

How to Cite

Волонцевич, Д. О., & Веретенников, Е. А. (2012). To the question of breakdown of transfer relations of onboard planetary gear boxes of tracklaying vehicles. Eastern-European Journal of Enterprise Technologies, 2(7(50), 25–27. https://doi.org/10.15587/1729-4061.2011.1820

Issue

Vol. 2 No. 7(50) (2011): Applied mechanics

Section

Applied mechanics

License

Copyright (c) 2014 Дмитрий Олегович Волонцевич, Евгений Александрович Веретенников

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.

A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.