Comparison of the indications received during experiment and modelling

Authors

  • Наталья Николаевна Фидровская Украинская инженерно-педагогическая академия ул. Университетская 16 г. Харьков, Украина, 61003, Ukraine
  • Иван Сергеевич Варченко Украинская инженерно-педагогическая академия ул. Университетская 16 г. Харьков, Украина, 61003, Ukraine

DOI:

https://doi.org/10.15587/1729-4061.2011.1821

Keywords:

Drum, rope, tensions, coverage, radiator, program, deformation, compression

Abstract

The experimental data of the tensions, appearing on the drum’s covering while the rope had being waved on it, and the tensions achieved from a countable model built in a program SOLID WORKS, were compared in this article

Author Biographies

Наталья Николаевна Фидровская, Украинская инженерно-педагогическая академия ул. Университетская 16 г. Харьков, Украина, 61003

Кандидат кандидат технических наук, доцент

Кафедра металлорежущего оборудования и технических систем

Иван Сергеевич Варченко, Украинская инженерно-педагогическая академия ул. Университетская 16 г. Харьков, Украина, 61003

Аспирант


References

  1. Исследование напряжений в стене канатного барабана экспериментальным методом / Фидровская Н. Н., Варченко И. С. // Восточно – Европейский журнал передовых технологий.-2010.-№5.- с. 60 - 63.

Downloads

How to Cite

Фидровская, Н. Н., & Варченко, И. С. (2012). Comparison of the indications received during experiment and modelling. Eastern-European Journal of Enterprise Technologies, 2(7(50), 28–30. https://doi.org/10.15587/1729-4061.2011.1821

Issue

Vol. 2 No. 7(50) (2011): Applied mechanics

Section

Applied mechanics

License

Copyright (c) 2014 Наталья Николаевна Фидровская, Иван Сергеевич Варченко

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.

A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.