Учет ограничений на выходную переменную в системе регулирования температуры перегрева пара

Authors

  • Богдана Викторовна Фоменко Национальный технический университет Украины «Киевский политехнический институт» пр. Победы 37, Киев – 56, 03056, Ukraine
  • Дмитрий Русланович Корниенко Национальный технический университет Украины «Киевский политехнический институт» пр. Победы 37, Киев – 56, 03056, Ukraine

DOI:

https://doi.org/10.15587/1729-4061.2009.20304

Keywords:

, control system of temperature of the overheated steam, output constraints

Abstract

In the article the new scheme of control system of temperature of the overheated steam for the straight-through boiler has been proposed. This scheme enables to ensure keeping the controlled temperature in the operational limits. The main assumptions for control systems with output constraints have been formulated.

Author Biographies

Богдана Викторовна Фоменко, Национальный технический университет Украины «Киевский политехнический институт» пр. Победы 37, Киев – 56, 03056

Ассистент

Кафедра автоматизации теплоэнергетических процессов

Дмитрий Русланович Корниенко, Национальный технический университет Украины «Киевский политехнический институт» пр. Победы 37, Киев – 56, 03056

Студент

Кафедра автоматизации теплоэнергетических процессов

References

  1. Липатников Г.А. Автоматическое регулирование объектов теплоэнергетики/ Липатников Г.А., Гузеев М.С. – Владивосток, 2007. – 136 с.
  2. Плетнев Г.П.. Автоматизированное управление объектами тепловых электростанций. - М.: Энергоиздат, 1981. – 368 c.
  3. Glattfelder A.H. Control systems with input and output constraints / Glattfelder A.H., Shaufelberger W. – London.: Springer, 2003. – 499p.

Downloads

Published

2009-06-20

How to Cite

Фоменко, Б. В., & Корниенко, Д. Р. (2009). Учет ограничений на выходную переменную в системе регулирования температуры перегрева пара. Eastern-European Journal of Enterprise Technologies, 3(4(39), 21–24. https://doi.org/10.15587/1729-4061.2009.20304

Issue

Vol. 3 No. 4(39) (2009): Control systems

Section

Control systems

License

Copyright (c) 2014 Богдана Викторовна Фоменко, Дмитрий Русланович Корниенко

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.

A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.