Алмазоподобные покрытия в электроаналитике

Authors

  • А. М. Семеней Харьковский национальный университет радиоэлектроники пр. Ленина, 14, г. Харьков, 61166, Ukraine
  • Н. Н. Рожицкий Харьковский национальный университет радиоэлектроники пр. Ленина, 14, г. Харьков, 61166, Ukraine

DOI:

https://doi.org/10.15587/1729-4061.2009.22359

Keywords:

diamond-like films (DLF), substrate, electrochemical researches

Abstract

The review of application of diamond and diamond-like coverages is conducted. The basic methods of synthesis of diamond and diamondlike films and the experimental set for diamond and diamond-like films platting is also described.

Electrochemical researches of different substrate are conducted with the diamond and diamond-like films with the purpose of determination of the most suitable material.

Author Biographies

А. М. Семеней, Харьковский национальный университет радиоэлектроники пр. Ленина, 14, г. Харьков, 61166

Научный сотрудник

Лаборатория аналитической оптохемотроники

Н. Н. Рожицкий, Харьковский национальный университет радиоэлектроники пр. Ленина, 14, г. Харьков, 61166

Доктор физико-математических наук, профессор

Лаборатория аналитической оптохемотроники

References

  1. Diamond electrochemistry/A. Fujishima, Y.Einaga, Tata N.Rao, Donald A. Tryk/ Elsevier 2005. – p. 586.
  2. Yu. V. Pleskov, Advances in electrochemical science and engineering, vol. 8, Weinheim: Wiley-VCH, 2003, p.209.
  3. Плесков Ю.В. Электрохимия алмаза. – М.: Едиториал УРСС, 2003. – 104с.
  4. V. S. Bagotsky, Fundamentals of electrochemistry, Second edition, Wiley, 2006. – p.772.
  5. Cynthia G. Zoski, Handbook of Electrochemistry, Elsevier, 2007. – p.938.

Downloads

Published

2009-08-20

How to Cite

Семеней, А. М., & Рожицкий, Н. Н. (2009). Алмазоподобные покрытия в электроаналитике. Eastern-European Journal of Enterprise Technologies, 4(10(40), 21–24. https://doi.org/10.15587/1729-4061.2009.22359

Issue

Vol. 4 No. 10(40) (2009): Applied physics and Materials Science. Applied mechanics

Section

Applied physics and Materials Science

License

Copyright (c) 2014 А. М. Семеней, Н. Н. Рожицкий

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.

A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.